Good evening, I have a TV that was working normally in color without any problems until one day when I was left with only black and white. However, the volume gauge that appears when I increase or decrease the sound is yellow, so I suppose the problem comes from the signal reception. Could anyone tell me what exactly might be the issue? Cable, ... Knowing that I have already tried resetting my television with no result. Thank you.

My color TV in black and white... : CCM

Réponse 1 / 6

Miura564 Posted messages 14829 Registration date Status Membre Last intervention 1 560

Hello,

What is the brand and model of your TV?
Do you happen to have a "Black and White" mode?

--
Volunteers appreciate the following words: hello, good evening, thank you, please! Don't forget! For emergencies, call 112 or learn patience.

Miura564 Posted messages 14829 Registration date Status Membre Last intervention 1 560

In your Installation menu, there is an option called "Color Coding" (see page 22 of the manual)

Make sure you are in Automatic mode.

Réponse 2 / 6

Anonymous user

I'm coming into the discussion a bit late, but wouldn't it simply be the color saturation that is set to zero???
Check in the TV MENU on the page where there are the settings for brightness, contrast, color, etc..................

Anonymous user

yes but ................ resetting the channels or restoring to factory settings
is not the same at all
and the first menu (channels) is much more prominently highlighted than factory reset!!!

Anonymous user

Here is an image of my image settings menu:

http://hpics.li/56fd0bc

There's not really what you're telling me...

Anonymous user

it corresponds to the line "color"

Anonymous user > Anonymous user

Unfortunately, it changes nothing at all.

Anonymous user

and with an external source, like a DVD for example, what does it give?? color or not?

Réponse 3 / 6

GhostSam Posted messages 4 Status Membre 17

Good evening, if you go through a television modem like Freebox HD (for example), try to replace it with your ISP because that seems to be all that's left...

Anonymous user

Unfortunately, my TV doesn't use it; it's a "standalone" TV with integrated digital terrestrial television, so it’s just connected basic...

Could it be due to a cable issue?

Réponse 4 / 6

Anonymous user

Well, after checking, it really is the cable. Thank you all and take care ;)

STARGATE43 Posted messages 13754 Registration date Status Contributeur Last intervention 2 644

You're welcome, with pleasure ;-)

Best regards and take care ;-)

paulcolombaud

good

Réponse 5 / 6

Anonymous user

Read

from the TV directly or via another device?

if it's in black/white then the plug is probably not connected properly
to that potential device

--
A crowded elevator will always feel different for a dwarf.

Anonymous user

I don't quite understand your question ^^ But my TV is alone (not connected to any device).

I tried unplugging and plugging the plugs back in, but... without results.

I'm not very knowledgeable about TVs, but I think the "round" plug that connects to a socket is faulty. Could that be the issue? (considering that I don't know what it's for x))

Anonymous user

Well, if you're watching your TV through a TNT box or a TV box with your internet package for example
if that's the case then it could have come from a poorly connected socket

I don't know much about TVs but I think the "round" plug that connects to a socket is faulty, could it be that? (knowing that I don't know what it does x))

I really can't see it
with all the goodwill in the world

Anonymous user

There are only 3 sockets on my TV: one that goes to the PS1 (yes, I'm old school xD), one that is used to turn on the TV, and the 3rd that provides the picture or reception.

Anonymous user

can you take a photo sometimes
transfer it to your pc and host it here https://www.cjoint.com/index.php
and send us the link to see

that's what intrigues me
and the 3rd that makes the image or the reception

Anonymous user

And its little name that I had forgotten is "Antenna socket" ;)

Réponse 6 / 6

STARGATE43 Posted messages 13754 Registration date Status Contributeur Last intervention 2 644

Good evening

I’m taking over from my friend Rossi ;-)

My first question, which may seem silly, is:

When moving the antenna cable connectors, is there any deterioration of the picture or not? Both at the TV input and at the output (reception box).

My second question (equally silly):

Have you tried another coaxial cable (antenna)?

Best regards ;-)

--> NO PROBLEMS, ONLY...SOLUTIONS <--
My answers are made according to the degree of flexibility of a cow's tail between the rungs of a chair in foggy weather ;-)

Anonymous user

Thank you very much ;)

If I move this cable (I thought about it so it's not stupid hehe), there is no color change, just "visual" crackling x)

I thought about it too, but we don't have one at home, and I wasn't sure until I saw that it might be coming from that. Do you think it could come from that?

My color TV in black and white...

6 réponses

Windows spotlight is not working.

Masked destination layer

Samsung j5 unable to answer

Scam of the suvedene highway

File name too long

No sound with ps3 and hdmi

Wake up from sleep mode in windows 10.

Internet connection problem with my ipad

Free box: remote control broken

Suspicious number text message