How to see who is connected to my bbox?
Solved
kyece
Posted messages
6
Status
Membre
-
kyece Posted messages 6 Status Membre -
kyece Posted messages 6 Status Membre -
Hello
NetGear Genie shows 7 devices connected to my bbox
that seems like a lot
yet the network is secured with WPA2 by the key indicated on the bbox?
How can I find out what each IP corresponds to?
Is it useful to download 'SoftPerfect WiFi Guard'?
Thank you for your help
NetGear Genie shows 7 devices connected to my bbox
that seems like a lot
yet the network is secured with WPA2 by the key indicated on the bbox?
How can I find out what each IP corresponds to?
Is it useful to download 'SoftPerfect WiFi Guard'?
Thank you for your help
2 réponses
Hello, you can access your modem's web page by typing in your address bar: http://192.168.1.1/
the usernames are often admin and admin OR admin and password
Otherwise, go to start > network > (right-click on) the icon of your modem (with my livebox I see an icon "SAGEM livebox ..." > access the device's web page.
This way you will have the correspondence of the IPs with the type of equipment.
If not, follow the procedure:
[windows key + r > type "cmd" > type "net view"]
all this without quotes
goodbye,
Come29270
the usernames are often admin and admin OR admin and password
Otherwise, go to start > network > (right-click on) the icon of your modem (with my livebox I see an icon "SAGEM livebox ..." > access the device's web page.
This way you will have the correspondence of the IPs with the type of equipment.
If not, follow the procedure:
[windows key + r > type "cmd" > type "net view"]
all this without quotes
goodbye,
Come29270
Thank you very much for this help
by accessing the modem, the information is indeed more precise than on Netgear Genie
I was able to identify all the connected devices
I don't see any connected to the HotSpot, I was worried that it might be what is 'eating' my bandwidth
And I don't have to load new software
Thanks again
Kyece
by accessing the modem, the information is indeed more precise than on Netgear Genie
I was able to identify all the connected devices
I don't see any connected to the HotSpot, I was worried that it might be what is 'eating' my bandwidth
And I don't have to load new software
Thanks again
Kyece