Pilot pour hp scanjet 5400c
Résolu
smavuela
-
spiralio Messages postés 4348 Date d'inscription Statut Membre Dernière intervention -
spiralio Messages postés 4348 Date d'inscription Statut Membre Dernière intervention -
Bonjour,
Je viens encore une fois solliciter votre concours très chers amis du club Cçm
j'ai un scanner hp scan jet 5400c
comment telecharger le driver pour Windows 7 32bit
cordialement votre Sylvain Mavuela
Je viens encore une fois solliciter votre concours très chers amis du club Cçm
j'ai un scanner hp scan jet 5400c
comment telecharger le driver pour Windows 7 32bit
cordialement votre Sylvain Mavuela
A voir également:
- Hp scanjet 5400c driver windows 10
- Clé d'activation windows 10 - Guide
- Restauration systeme windows 10 - Guide
- Windows 10 ne démarre plus - Guide
- Windows 10 gratuit - Accueil - Mise à jour
- Realtek audio driver windows 10 - Télécharger - Pilotes & Matériel
2 réponses
Bonjour,
Apparemment Windows 7 ne reconnait directement les pilotes de ce scanner ( on ne trouve pas de pilote pour Windows 7 pour ce scanner sur le site HP).
Cependant, j'ai vu qu'il y avait une astuce mais c'est en américain.
Il faut que je traduise correctement avant, je ne voudrais pas faire de bêtise...
Apparemment Windows 7 ne reconnait directement les pilotes de ce scanner ( on ne trouve pas de pilote pour Windows 7 pour ce scanner sur le site HP).
Cependant, j'ai vu qu'il y avait une astuce mais c'est en américain.
Il faut que je traduise correctement avant, je ne voudrais pas faire de bêtise...
Bonjour,
Windows 7 ne reconnaît pas le pilote pour ce scanner.
Cependant, il y a une astuce, mais il faut que je la traduise avant ( c'est de l'américain )
Ce n'est pas bien long,mais je ne voudrais pas écrire une bêtise...
Windows 7 ne reconnaît pas le pilote pour ce scanner.
Cependant, il y a une astuce, mais il faut que je la traduise avant ( c'est de l'américain )
Ce n'est pas bien long,mais je ne voudrais pas écrire une bêtise...
Oups,
Je croyais que je n'avais pas envoyé mon premier message :-(
Texte original
Windows 7 was not able to find driver for this scanner.
I downloaded following driver from HP website (which is for XP and windows 2000)
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-21893-1&lc=en&dlc=en&cc=us&...
After installing this driver I re-connected my scanner to computer. This time windows 7 found driver and installed.
I installed it and then started HP Scan Pro 3.1 using "Run as Administrator". Normal run was giving me error but this way It worked for me flawlessly. I am using 32 bit Windows 7.
Traduction
Windows 7 n'a pas pu trouver le pilote pour ce scanner.
J'ai téléchargé le pilote suivant à partir du site HP ( qui est pour XP et windows 2000 )
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-21893-1&lc=en&dlc=en&cc=us&...
J'ai installé ce pilote et j'ai reconnecté mon scanner à l'ordinateur. Cette fois, windows 7 à reconnu le pilote et l'a installé.
Je l'ai installé (bis repetita ) et ensuite j'ai "démarré" HP Scan Pro 3.1 en utilisant "Run as Administrator". Le démarrage en "Normal" envoyait un message d'erreur. Mais, en utilisant le "mode" Administrateur cela a parfaitement marché.
J'utilise Windows 7 32 bits
Voici la page
https://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Need-driver-for-HP-Scanjet-5400c-scanner-using-Windows-7/td-p/172462
Apparemment, ceux qui ont utilisé cette astuce du forum HP sont satisfaits
Je croyais que je n'avais pas envoyé mon premier message :-(
Texte original
Windows 7 was not able to find driver for this scanner.
I downloaded following driver from HP website (which is for XP and windows 2000)
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-21893-1&lc=en&dlc=en&cc=us&...
After installing this driver I re-connected my scanner to computer. This time windows 7 found driver and installed.
I installed it and then started HP Scan Pro 3.1 using "Run as Administrator". Normal run was giving me error but this way It worked for me flawlessly. I am using 32 bit Windows 7.
Traduction
Windows 7 n'a pas pu trouver le pilote pour ce scanner.
J'ai téléchargé le pilote suivant à partir du site HP ( qui est pour XP et windows 2000 )
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-21893-1&lc=en&dlc=en&cc=us&...
J'ai installé ce pilote et j'ai reconnecté mon scanner à l'ordinateur. Cette fois, windows 7 à reconnu le pilote et l'a installé.
Je l'ai installé (bis repetita ) et ensuite j'ai "démarré" HP Scan Pro 3.1 en utilisant "Run as Administrator". Le démarrage en "Normal" envoyait un message d'erreur. Mais, en utilisant le "mode" Administrateur cela a parfaitement marché.
J'utilise Windows 7 32 bits
Voici la page
https://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Need-driver-for-HP-Scanjet-5400c-scanner-using-Windows-7/td-p/172462
Apparemment, ceux qui ont utilisé cette astuce du forum HP sont satisfaits