View original (French)

Tip for my R/C helicopter Helix GC-100

guigui57070 Posted messages 57 Status Membre -  
 vezezoux -
Good evening, I bought my RC helicopter two days ago, a Hélix GC-100 from GIFI for €30 and it's great. I wanted to know if I can improve it, how to paint it, boost it, etc. Thanks for the future responses :) V

image of the helicopter below:

http://imageshack.us/a/img843/1717/hlico.jpg
http://imageshack.us/a/img833/7808/hlico2.jpg
http://img843.imageshack.us/img843/6104/hlico3.jpg
http://img842.imageshack.us/img842/3826/20121230150941.jpg

Configuration: Windows Vista / Chrome 23.0.1271.97

5 réponses

Réponse 1 / 5
vALENTIN
 
Hi, I have the same issue if we can call it a problem, but could you help me? Because when I charge it on my computer, it doesn't charge, and the manual says to check because normally there is a light that turns on. But for me, there is no light? Why? (the helicopter is off)
Please help me.
27
nonyme
 
the charge indicator and on the USB socket of the cable.
0
damien
 
You need to charge the battery for it to work. The first time I tried it, the remote didn't detect it; it blinks quickly, but that's all.
0
moonred > damien
 
Have you found the solution?
1
Robb
 
How do I connect the controller to the helicopter? I charged it for 120 minutes and nothing happens when the helicopter and the controller are turned on... the little light in the center of the controller keeps blinking!
What should I do?
Thank you in advance.
0
thias
 
same problem
0
Réponse 2 / 5
guigui57070 Posted messages 57 Status Membre 18
 
I broke my gyroscopic bar, if someone could tell me the price and advise me whether I should change this part, or if this part is more expensive than 30€ to buy a second helicopter.
13
Réponse 3 / 5
Quentin67330 Posted messages 13 Status Membre 18
 
Hello,
did you have to perform any special procedure for the remote control to detect the helicopter? Because mine does not detect it..
Thank you
5
lyderic45380 Posted messages 2 Status Membre 6
 
I had the same problem, but for me it was a manufacturing defect
I brought it back and they replaced it
now it works normally
:)
0
Fabjul
 
Hello Quentin, have you found a solution because I have the same problem.
0
tutur
 
Hello, I think it needs to be changed at Gifi. I had the same problem and then it worked.
0
piquesous Posted messages 15734 Registration date   Status Contributeur Last intervention   6 123 > tutur
 
Hello tutur,

I think that over time, people have found a solution.

See you later.
0
Réponse 4 / 5
lyderic45380 Posted messages 2 Status Membre 6
 
Hello everyone

if you have problems with your GF Hurricane GC 100 helicopter, I recommend you visit this site (improved user manual)

here is the link
http://www.heli4.com/IMG/pdf/notice_helico_walkera_dragonfly_4.pdf
please note this is a .pdf file
6
giravolt Posted messages 1 Status Membre
 
Hello, I don't have the same remote control as in the attached manual, I don't know what the R/L button/dial at the top right is for, and the button on the bottom left for "low/high" speed, when do we use it? Does anyone have the real manual for this GC 100 model? Thanks.
0
kapitaine > giravolt Posted messages 1 Status Membre
 
The knob in the upper left is used to stabilize the helicopter and prevent it from spinning on itself, and the two buttons are the flight speeds: one for slow and the other for fast.
0
Réponse 5 / 5
Licha47
 
Hi everyone, I have a problem with the helicopter... When I take off and put the power to max, it lifts off but I can't control it, so it goes up to 7 or 8 meters and then it drops suddenly. Has this ever happened to anyone? What should I do?
0
ekko11
 
Hi =>
Not enough batteries, it's the classic case. Or the quartz (first check the one in the remote by opening it, it's a rectangle with probably 22 mHz written on it. The same should be present under the casing)
0