No video signal
Solved
TONTONDINGDING
Posted messages
1
Status
Membre
-
stewartia Posted messages 12469 Status Membre -
stewartia Posted messages 12469 Status Membre -
Hello,
when I turn on the television and the CanalSat decoder (HD cube) I get the following message: no video signal, while the day before everything was working fine and I didn't do anything. Additionally, I haven't touched anything. The TV screen remains completely black, and the decoder only shows the time and nothing else.
Configuration: Windows Vista / Internet Explorer 7.0
when I turn on the television and the CanalSat decoder (HD cube) I get the following message: no video signal, while the day before everything was working fine and I didn't do anything. Additionally, I haven't touched anything. The TV screen remains completely black, and the decoder only shows the time and nothing else.
Configuration: Windows Vista / Internet Explorer 7.0
1 réponse
Could you please specify the type of connection between the TV and the Cube? Make sure it is properly established. For the Cube, a low-end device provided by Canal, if it has crashed, unplug it, count to 10, and plug it back in. Otherwise, also check that the TV is set to the input where the Cube is connected.