Universal Remote Control Code URC 20-C4B

HELLO, I HAVE THE REMOTE CONTROL NSE URC20-C4B BUT I NO LONGER HAVE THE CODE MANUAL. IT'S FOR A DUAL BRAND TELEVISION. IF YOU CAN HELP ME, THANK YOU IN ADVANCE.

The LED turns off, proof that the code is correct
Not necessarily. See point 6 of the Introduction section of the code.

And if none of the provided codes are satisfactory, you need to use the search methods outlined in the manual.

--
To err is human, to persist is diabolical.

Hello,

I have the information for the NSE URC22 remote controls.
I'm sharing it with you because there is a chance it will be the same.

Codes for Telefunken: 067 075 098 132 133 134 135 140 185 186 231 235.

To enter the code, here's how to proceed.

1) Press and hold the "Set" button. Then press the button of the device you want to control. TV1, TV2, VCR1, etc...

2) The LED on the remote will light up. Release both buttons

3) Enter the 3-digit code for the device you want to control

4) If the code entered is correct, the LED will turn off automatically. If the code is incorrect, the LED will blink twice. The remote will remain in Setup mode (lit). Start again from 3)

5) Check if most of the buttons on the remote work properly. If not, start again from 1) with another code from the same brand until you achieve satisfactory operation.

Bye.

PS There's no need to ask the same thing twice on two different forums. It's against the rules and the other request will be "moderated," if it hasn't been done already.

code for dual
256.259.300.302.311.312.316.324 forvcr 005.011
best regards vero bye

The instructions I provided are extracted from a document that you can download, which pertains to a URC 22b remote control from NSE http://www.remotecentral.com/...

This kind of document is generally valid for a series of remote controls from the same supplier. This is the case here for all URC 22b remote controls. Unfortunately, it doesn't seem to be completely valid for the URC 20; however, if your TV is newer than the manual, it could also be due to the fact that its code is new in the Telefunken range.

The document above does not exist in French to my knowledge. In addition to the method of direct code entry that I sent you translated, it explains how to search for the code when you don't know it. I've never had to translate it, but if you're not comfortable enough with English, I can do it.

Bye.

Hello,

I have a similar problem to yours: the same remote control but a SONY television.
If you have the documentation for this remote control, I would be very interested.
Best regards.

Alain

URC = Universal Remote Control = Universal Remote Control

URC20 is a reference. Not a brand.
At least 2 brands use it: NSE and Remoshak.

For Sony
NSE 028, 119, 126, 127, 128, 129, 130, 182, 189, 228, 260, 705.
Remoshak (touch buttons) 004, 049, 086, 087

Bonjour, j'ai acheté une télécommande universelle pour une TV Telefunken. Le problème, c'est que les chaînes sont en belge. Comment faire pour qu'elles soient en français ?

Hi,

There are 3 official languages in Belgium: French, Dutch, and German. I suppose you want to talk about Dutch.

Whether your remote control is yellow, blue, black, green, or red, it doesn't change anything!

When you say that the channels are in Belgian, I assume (again!) that you're talking about the Menu.
You bring up the pages one after the other. When you see the word Taal, which means Language in Dutch, select it and press OK. That opens a new page where you just have to choose French.

However, if it's like at my place (I live near the border), there's nothing to be done for the 2 channels I receive that are in "Belgian" Dutch. It's only when they show French movies with subtitles that I manage to get them in French. lol

Errare humanum est, perseverare diabolicum.

Hello,

Dual 255 258
Dual-Tech 004 011 019 029

If you no longer have the manual manual for universal remote NSE URC22 This will help you find the code for your TV in case the ones listed do not work, which is relatively common.

--
To err is human, to persist is diabolic.

Thank you for the codes, but I now have another issue because when I enter the code, the LED turns off, proving that the code is correct, yet I still can't control the TV with the remote.

the codes should not be compatible between the two models maybe?

Who can help me understand how the remote control mentioned above, E.Pilot SRC-9200, works? It was sold to me and had already been used for other devices, and I would like to reprogram it. Thank you from the bottom of my heart.

JE VEUX UN GUIDE UTILISATEUR

Bonjour,

Le guide de l'utilisateur et la liste des codes (en anglais) sont ICI

--
Errare humanum est, perseverare diabolicum.

Hello,

First of all, a big thank you for the previous responses that helped me solve part of my problem.
I am looking for the code for Canal SAT because I tried 804 for the URC22 but it doesn't work. I did the automatic search which allows me to turn off and change the channel but not more.
Thank you in advance for your help and Happy New Year to everyone!

Hello,

The so-called universal remotes are not as universal as their manufacturers claim, and what you're experiencing is unfortunately not exceptional.

The only way to have a remote that works exactly like the original remote is a replacement remote like this one http://ww1.telecommande.net

"This model is ready to use with exactly the same functions and symbols as your CANAL + CANALSATELLITE model."

--
To err is human, to persist is diabolical.

Thank you jmp59 for your response and for the link.

Hello

I want to program my Toshiba VCR with the remote control in question and I'm looking for the corresponding code for the VCR. Is there anyone who can help me... thank you very much.

Hello,

273, 292, 307

The list of codes is HERE

--
To err is human, to persist is diabolical.