TV channel setup for Radiola

Hello,
I have the same issue
I can't adjust my channels from the universal remote (Phillips SRU5040/19)
I have a Radiola combo (I don't remember the reference...)
Is there a way to access the settings from the TV?
A key combination on the VCR? Or something else?
Thank you

I don't understand what your problem is. So I'm presenting you everything that can help you:

User guide for your remote control https://www.p4c.philips.com/files/s/sru5040_10/sru5040_10_dfu_eng.pdf
Codes for Radiola TVs 0064, 0583, 0244
One code for Radiola VCRs 0108
The Philips support for remote controls http://www.urc.philips.com/ (This is how I found your codes)

To tune the channels, use the Menu button on the remote control. It's quite standard, but to get explanations and avoid guessing, you need to refer to the Combo's manual.
If you no longer have it, it is likely possible to download it. But for that, you need to know the model number.
--
To err is human, to persist is diabolical.

Hello,

I have a Philips TV model 14AA3327 Anubis A, I lost the original remote, I have a universal remote (Proline brand) but I can't set the channels, do you have any advice?
Thank you

Hello
I have the same problem, I have the Philips 5020 remote but I can't access the menu to set the channels.

Thank you

Hello,

Well, use a universal remote!

--
To err is human, to persist (in error) is diabolical.

Hello,

The channel adjustment process is more of a television issue than a remote control issue. The difficulty sometimes lies in finding the correspondence between the buttons in the manual and those on the remote, as the symbols may be different.

If you no longer have your TV manual, you can download it here, knowing that Radiola is a sub-brand of Philips.

--

To err is human, to persist is diabolical.

Hello,

Do you have the reference of your remote: SBC.........?

See you.

Thank you Sabrina,

I also have the problem but I have the correct remote control.

See you later

Gilles.

Hello everyone

I have a combined Radiola TV and VCR, I can get Canal + clearly but I can't seem to adjust the other channels with my remote.

Thank you for responding.

I’m responding to you. But I don’t think anyone will be able to give you a solution without knowing what remote control you have.

Maybe a clairvoyant, and even that is not certain!

And what about the Radiola reference of your Magnéto 3906 or 3960?

You can download the manual for your remote control here http://www.remotecentral.com/...

--
To err is human, to persist is diabolical.

Hello,
I no longer have the original remote control, and I need to install the channels on my Radiola 37TA1262 TV. How can I do it?
Thank you.

Good evening,

Thank you very much for your reply. Do you think I can use my universal remote to set up the channel search on this television?

Certainly, provided that the corresponding code for the TV has been previously entered into the remote control.

This implies having the remote control's manual. Because downloading this Proline manual from the Internet seems impossible. I've seen requests for it going unanswered for months.

--

To err is human, to persist is diabolical.

Hello,

I have a PROLINE 1490 R TV with the original remote, but I can't find how to adjust the channels!! :(

Specify your problem. Explain what you are unable to do and if you have any documentation.

--
To err is human, to persist (in error) is diabolical.

So I can do it since I have the manual for my Proline remote, I entered the code corresponding to the Philips brand, the only issue now, as you pointed out, is to find the corresponding symbols on this remote, do you have any idea?

Otherwise, I saw the Proline manual earlier on the internet...

find the corresponding symbols on this remote, do you have any idea?
Since I don't have a Proline remote, ... I can hardly compare
!
--

Error is human, to persist is diabolical.

Hello,
I have the same problem with my Radiola TV! I can't tune the channels, I have the original remote but two symbols can be on the same button... I'm going to try to follow what the manual provided by JMP59 says...