View original (French)

Open image with cmd

patatesolard -  
 Fox -
Hello,

I'm looking for a command to open an image in C:\ via the command prompt.
It's quite urgent --"
Thank you for getting back to me =)

3 réponses

Réponse 1 / 3
m_o.o_m Posted messages 563 Status Membre 30
 
it works for me
cmd...enter
full path of the image and add "\yournname.jpg" then press enter
it works very well, the image opens
1
patatesolard
 
bizarre de mon côté alors???? --"
0
m_o.o_m Posted messages 563 Status Membre 30
 
Yes, it's surprising your problem.
Did you correctly enter the address of the photo with its name afterwards? Be careful not to confuse "/" and "\"
Example: C:\Users\home\Desktop\mesphotos\photo1.jpg
0
Fox
 
C:/ = internal hard drive
If your image is on an external drive, you need to check in "This PC" and then look at your hard drive, it will be written (Drive name) (Domain name you need to execute in cmd.
Example:
(Drive name ->) HJKH123(D:)
So you need to execute in cmd:
(D:)/Users... (<-Path)



I hope I helped you! :D

Best regards, Fox.
0
Réponse 2 / 3
m_o.o_m Posted messages 563 Status Membre 30
 
When entering the complete path of the image and then pressing enter, it does not open?
0
patatesolard
 
well no it's a .jpg image but I'm talking about an image of any format
0
Réponse 3 / 3
Fox
 
C:/ = the internal hard drive
If your image is on an external drive, you need to check in My Computer and then look at your hard drive, it will be written (Hard drive name) (Domain name you need to execute in cmd.
Example:
(Hard drive name ->) HJKH123(D:)
You then need to execute in cmd:
(D:)/Users... (<-Access path)

I hope I helped you! ;D

Best regards, Fox.
0