View original (French)

Open image with cmd

patatesolard -  
 Fox -
Hello,

I'm looking for a command to open an image in C:\ via the command prompt.
It's quite urgent --"
Thank you for getting back to me =)

3 answers

  1.
    m_o.o_m Posted messages 563 Status Member 30
     
    it works for me
    cmd...enter
    full path of the image and add "\yournname.jpg" then press enter
    it works very well, the image opens
    1
    1. patatesolard
       
      bizarre de mon côté alors???? --"
      0
    2. m_o.o_m Posted messages 563 Status Member 30
       
      Yes, it's surprising your problem.
      Did you correctly enter the address of the photo with its name afterwards? Be careful not to confuse "/" and "\"
      Example: C:\Users\home\Desktop\mesphotos\photo1.jpg
      0
    3. Fox
       
      C:/ = internal hard drive
      If your image is on an external drive, you need to check in "This PC" and then look at your hard drive, it will be written (Drive name) (Domain name you need to execute in cmd.
      Example:
      (Drive name ->) HJKH123(D:)
      So you need to execute in cmd:
      (D:)/Users... (<-Path)



      I hope I helped you! :D

      Best regards, Fox.
      0
  2. m_o.o_m Posted messages 563 Status Member 30
     
    When entering the complete path of the image and then pressing enter, it does not open?
    0
    1. patatesolard
       
      well no it's a .jpg image but I'm talking about an image of any format
      0
  3. Fox
     
    C:/ = the internal hard drive
    If your image is on an external drive, you need to check in My Computer and then look at your hard drive, it will be written (Hard drive name) (Domain name you need to execute in cmd.
    Example:
    (Hard drive name ->) HJKH123(D:)
    You then need to execute in cmd:
    (D:)/Users... (<-Access path)

    I hope I helped you! ;D

    Best regards, Fox.
    0