Neoxeo screen driver
so13
Posted messages
461
Status
Member
-
krimorley -
krimorley -
Hello everyone and happy new year 2006, I have a display settings problem, I have to change my screen resolution every time I reboot. I think it's due to a missing driver (named default monitor in the device manager)......
I've tried to search for the drivers but I couldn't find them;
I'll leave the model of the screen in case someone can help me, thanks
17-inch screen NEOXEO
model: lm17c(8)
thank you in advance
I've tried to search for the drivers but I couldn't find them;
I'll leave the model of the screen in case someone can help me, thanks
17-inch screen NEOXEO
model: lm17c(8)
thank you in advance
16 answers
Good evening,
I have exactly the same screen model, and I have the same problem. So if you found a solution, I'm interested.
Thank you.
I have exactly the same screen model, and I have the same problem. So if you found a solution, I'm interested.
Thank you.
Hello,
I have exactly the same problem with the same equipment (bought at Auchan) and it's been happening for a week now. I've asked all my acquaintances, but no one has found a solution.
So if you have any ideas, please share them with us.
I have exactly the same problem with the same equipment (bought at Auchan) and it's been happening for a week now. I've asked all my acquaintances, but no one has found a solution.
So if you have any ideas, please share them with us.
Hello,
I ultimately found no technical solution.
I called Neoxeo at 08.25.70.01.90 because theoretically they were supposed to replace it within 72 hours (an agreement between Auchan, where I also bought this product, and Neoxeo for products that are defective or under warranty). However, Neoxeo informed me that they no longer provide maintenance for this type of product since the beginning of the year, and advised me to have Auchan take it back. Following that, Auchan (in Pau) replaced it for me without any problem.
Good luck!
I ultimately found no technical solution.
I called Neoxeo at 08.25.70.01.90 because theoretically they were supposed to replace it within 72 hours (an agreement between Auchan, where I also bought this product, and Neoxeo for products that are defective or under warranty). However, Neoxeo informed me that they no longer provide maintenance for this type of product since the beginning of the year, and advised me to have Auchan take it back. Following that, Auchan (in Pau) replaced it for me without any problem.
Good luck!
Hello,
I just bought a Neoxeo 16:9 monitor.
It has 2 VGA inputs and one DVI input.
On my PC, I have a GEFORCE FX 5200 video card in PCI with a DVI output.
My problem is as follows:
No signal when I connect the screen via DVI. VGA works fine.
I changed the cable, still the same message.
The DVI output of my card works very well.
I tried it at my friend's place.
Her PC has an ATI RADEON 9200se graphics card in AGP.
I connected my screen to the DVI output of her card and, miraculously, it works very well.
The problem probably comes from the fact that I am using PCI and my card may not be compatible with this screen.
I will probably change the graphics card and go for a RADEON in AGP.
The font resolution is at 96dpi at my friend's place, whereas at mine it is at 120dpi.
I will also try to change that.
I will keep you updated on the results.
I just bought a Neoxeo 16:9 monitor.
It has 2 VGA inputs and one DVI input.
On my PC, I have a GEFORCE FX 5200 video card in PCI with a DVI output.
My problem is as follows:
No signal when I connect the screen via DVI. VGA works fine.
I changed the cable, still the same message.
The DVI output of my card works very well.
I tried it at my friend's place.
Her PC has an ATI RADEON 9200se graphics card in AGP.
I connected my screen to the DVI output of her card and, miraculously, it works very well.
The problem probably comes from the fact that I am using PCI and my card may not be compatible with this screen.
I will probably change the graphics card and go for a RADEON in AGP.
The font resolution is at 96dpi at my friend's place, whereas at mine it is at 120dpi.
I will also try to change that.
I will keep you updated on the results.
Hello everyone
so I changed my graphics card
I got an Asus A9550GE by ATI RADEON in AGP 8x
With DVI, VGA, and TV output.
It works perfectly.
I think the problem really comes from an incompatibility of certain PCI graphics cards.
Here's a solution that might be a bit pricey but allows you to keep your screen.
My screen has 2 VGA inputs and one DVI.
For quality price, it’s pretty good.
It’s up to you to decide.
Bye
so I changed my graphics card
I got an Asus A9550GE by ATI RADEON in AGP 8x
With DVI, VGA, and TV output.
It works perfectly.
I think the problem really comes from an incompatibility of certain PCI graphics cards.
Here's a solution that might be a bit pricey but allows you to keep your screen.
My screen has 2 VGA inputs and one DVI.
For quality price, it’s pretty good.
It’s up to you to decide.
Bye
Hello, I have a Neoxeo flat screen and I accidentally clicked on automatic color adjustment, and now my screen is green. I don't know how to restore the colors.
Thank you in advance.
Thank you in advance.
Hello,
I have a NEOXEO LM17C screen; I must have a power supply issue... my screen works for 1 second and then automatically goes into standby... what should I do?
I have a NEOXEO LM17C screen; I must have a power supply issue... my screen works for 1 second and then automatically goes into standby... what should I do?
Hello Sam
My poor thing, I know the problems with the Neo Xeo
I know your model well
Does your indicator light turn off or does it stay on?
If your power indicator light turns off, check with a neon-type lamp by bringing it close to your screen panel, and if you see or spot the image, then the inverter board that powers your screen is faulty. But if you have no image, it's your UC board
In both cases, you'll need to have it repaired
In certain models, we change the UC board or repair the inverter, it all depends on the inverter model
I would need more details to really tell you where your problem originates, but basically, you have the main faults of this model.
My poor thing, I know the problems with the Neo Xeo
I know your model well
Does your indicator light turn off or does it stay on?
If your power indicator light turns off, check with a neon-type lamp by bringing it close to your screen panel, and if you see or spot the image, then the inverter board that powers your screen is faulty. But if you have no image, it's your UC board
In both cases, you'll need to have it repaired
In certain models, we change the UC board or repair the inverter, it all depends on the inverter model
I would need more details to really tell you where your problem originates, but basically, you have the main faults of this model.
hi manou
regarding the neo xeo, the company no longer exists so don’t buy any if someone offers them to you
for those having inverter issues, try the capacitors or the micro fuse located on it; otherwise, there are replacement inverters available
sorry for not replying sooner as I have moved
you can otherwise reach me at my msn address Oberon_Terre_Perdue@live.fr
regarding the neo xeo, the company no longer exists so don’t buy any if someone offers them to you
for those having inverter issues, try the capacitors or the micro fuse located on it; otherwise, there are replacement inverters available
sorry for not replying sooner as I have moved
you can otherwise reach me at my msn address Oberon_Terre_Perdue@live.fr
I am sending you this message because I have exactly the same problem you describe. Neoxeo LM21C screen: The screen turns off after a few seconds. No image with a neon light in front of the panel. Moreover, I opened the screen and did not notice anything abnormal visually regarding the connections.
Can you please help me troubleshoot this screen ...
Sincerely
FABRICE
Can you please help me troubleshoot this screen ...
Sincerely
FABRICE
Hello, I managed to fix a Neoxeo 17-inch screen. It had the same symptoms as previously described; it only stayed on for two seconds before turning off. I opened it up and noticed that the power connectors of the screen were poorly connected, so with a screwdriver, I reconnected the ribbon cable, and it works again. A big stroke of luck.
Hello,
I have the same problem as you, craquinette, but I can't even center the screen with the button; I have to reconfigure it every time. So if you have any ideas or if someone gives you the solution, could you pass it on to me?
I have the same problem as you, craquinette, but I can't even center the screen with the button; I have to reconfigure it every time. So if you have any ideas or if someone gives you the solution, could you pass it on to me?
Hello, I have the same problem; the screen lights up a little and goes to sleep. What should I do, please?
Hello everyone,
*once again I realize that we are not the only ones!!!!
Well, I bought a NEOXEO 19" TFT screen in June 2006
On March 15, 07 I took it back because I had a white screen upon startup and they found nothing wrong
On June 15, 07 I took it back again and they exchanged it for me
On February 15, 08 I am having problems again
Has anyone had this issue? What are the options?
Thank you for your responses.
*once again I realize that we are not the only ones!!!!
Well, I bought a NEOXEO 19" TFT screen in June 2006
On March 15, 07 I took it back because I had a white screen upon startup and they found nothing wrong
On June 15, 07 I took it back again and they exchanged it for me
On February 15, 08 I am having problems again
Has anyone had this issue? What are the options?
Thank you for your responses.
Same problem as all of you, I can't close the programs because the buttons are hidden
I've tried tons of settings without success and since today I can't even adjust it with the button on the right side, it just won't respond. I really do not recommend buying such a screen.
I've tried tons of settings without success and since today I can't even adjust it with the button on the right side, it just won't respond. I really do not recommend buying such a screen.
same problem as you: forced to realign the display with the buttons on the right: there is no solution and it even seems that the company neoxeo no longer exists! http://www.neoxeotech.com is for sale! no more drivers... classy!
I just have to change the screen...
I just have to change the screen...
Your graphics card has nothing to do with it; it's the capacitors in your screen that are faulty.
Go there, there’s a super detailed tutorial to fix all that.
https://forum.hardware.fr/hfr/HardwarePeripheriques/Ecran/neoxeo-parckard-callisto-sujet_37859_1.htm
;)
Go there, there’s a super detailed tutorial to fix all that.
https://forum.hardware.fr/hfr/HardwarePeripheriques/Ecran/neoxeo-parckard-callisto-sujet_37859_1.htm
;)
Salut, ceux qui achètent des condensateurs, évitez les boutiques chinoises qui vont vous vendre des condos de mauvaise qualité, car si vous ne le saviez pas, les problèmes de condos dans les écrans sont dus à des condos de mauvaise fabrication venus d'Asie, notamment de Chine. Faites aussi attention à la valeur en micro, à leurs voltages et à la taille du composant. Bonne réparation à tous et toutes.