View original (French)

Lotus watch problems with the date!!!

Solved
michougf38 Posted messages 34 Status Membre -  
poupougne13 Posted messages 43203 Registration date   Status Membre Last intervention   -
Hello, I have a Lotus watch like this one: http://www.cre-or.fr/img/p/1526-1526-thickbox.jpg

and I would like to know how to set the date on it because today is March 1st, but since the watch doesn't know that February only has 28 days, it shows that it's the 29th!!!

Thank you for your help!!!
Configuration: Windows Vista / Safari 532.5

6 réponses

Réponse 1 / 6
poupougne13 Posted messages 43203 Registration date   Status Membre Last intervention   11 049
 
Are there one or two notches on the crown?
On some watches, it only changes the date in ONE direction, not the other...

See you later
--
"Who wants to climb a mountain starts from the bottom!"
Signed: "Gillette" aka "nobody"! ;) (°!°)
42
Réponse 2 / 6
michougf38 Posted messages 34 Status Membre 11
 
Thank you, I succeeded thanks to you, a big thank you!!!
8
Réponse 3 / 6
poupougne13 Posted messages 43203 Registration date   Status Membre Last intervention   11 049
 
Good evening...

In my opinion, you need to pull the crown to the first notch (the "winder") and turn it to change the date...

Best regards,

See you later

--
"He who wants to climb a mountain begins from the bottom!"
Signed: "Gillette" a.k.a. "nobody"! ;) (°!°)
3
max
 
Hello,
I have an issue with my Lotus 15432 watch; I need to set the day and the date, but I can only adjust the date by pulling the crown to the first notch and not the day :( does anyone have any ideas?
Thanks in advance.
0
yba
 
I have the same problem as quemax.
0
minimoi
 
Hello, you need to turn the winding crown (crown in position 1) counterclockwise and make a few turns ;)
1
steph > minimoi
 
Thank you, I was starting to get a sore finger from winding the watch lool
0
Quentin > minimoi
 
You're welcome :)
0
Réponse 4 / 6
poupougne13 Posted messages 43203 Registration date   Status Membre Last intervention   11 049
 
You're welcome, it wasn't very complicated! ;)

Best regards,

See you later
--
"Who wants to climb a mountain starts from the bottom!"
Signed: "Gillette" a.k.a. "nobody"! ;) (°!°)
2
Réponse 5 / 6
michougf38 Posted messages 34 Status Membre 11
 
No, it's not working!!!
1
Réponse 6 / 6
Peu importe
 
Hello,
I have the same problem with a Lotus 15646, I've been turning for more than 2 minutes, nothing is happening...
0