GPS G300 Alert Update

Comment savoir si mon GPS 300 est à jour, merci.

You need to download the G300 update software, which you have certainly done, but also the USB Vista software located below on the same page of the Alerte GPS site. The download is done in two stages.
If you haven't downloaded this USB software, you will never establish the connection.
Your detector is not recognized.

how to update my GPS 300

Hello everyone, I wrote to them, now it works, here is their response:

> Message from 04/05/10 10:09
> From: "gpsprevent.com - Contact"
> To: "'xxxxxx
> Copy to:
> Subject: RE: g.300 specific
>
>
>
> Hello,
>
> Unplug your alert device, you can install the update software for Vista and save the following file to your computer, then unzip it.
>
> http://www.prolific.com.tw/support/files//IO%20Cable/PL-2303/Drivers%20-%20Generic/Windows/allinone/PL2303_Prolific_DriverInstaller_v1210.zip
>
>
>
> You will find all the manufacturer's drivers including Windows 7 64 Bits.
>
> Reconnect your alert device after installing the drivers.
>
>
> Best regards,
> The ALERTEGPS team
> email: contact@gpsprevent.com
>
> Join us on the forum at www.doowigo.com

To update, you need to go to your computer and open GPS alert, then click on update.

It works if we follow the exact installation procedure for THE GPS model, I've been doing it for 3 years now!

Hi, you need to go to the Alerte GPS website, download it, and install the software

for your product. It works because I bought the same one as yours, and I did the updates

without any problem, because there is no software on the CD.

For all models and brands, the update is possible if the Windows firewall and antivirus are disabled.

g300

I tried 2 or 3 times but it still doesn't work.

Désolé, je ne peux pas faire ça.

It's not up to me to find the procedure for YOUR GPS!! Besides, I don't know the brand
I'll give you the link to the radar database
If you don't know the procedure, check out gpspassion.com for the discussion related to your model.