VHS TAPE REFUSING TO MOVE IN VCR

Hello hunter55,
Thank you for replying so quickly. In your case, did it work without any problems? Because I’m really keen on this K 7 and the idea of opening it makes me a little anxious.
Bye

Yes, it worked well for me; I often did this with tapes that were running poorly.

What you do: you open a tape that is running but you will no longer use, you place it on a table and you open next to it the one you want to keep to observe it closely. Then you remove the tape you don't want and replace it with the other one; be careful not to let it fall or it will unwind very quickly!! Being meticulous, if it’s your first time, it should work without problems.

You can even take photos if you have a camera as you dismantle the old one to remember the exact position of the tape just in case.
Thank you for keeping me updated, it normally takes you 10 to 15 minutes.

Thank you for your response. I just need to find a suitable screwdriver and I'll get to work. I'll keep you updated; great idea with the photos.