help for omniswitch 6800

Question

Bonjour,
hello please i have one problem with omniswitch 6800 , i need cable console pinout s for connect my switch with pc 
thanks & best regards

attori · Answer

RJ-45 Console Port – Connector Pinout

Pin Number             Signals as DTE Console Port
1                            NC
2                            NC
3                            RXD
4                            Ground
5                            Ground
6                            TXD
7                            NC
8                            NC

zouhair12 · Answer

dear Mr 
thank you very much about this help .but i need connection betwine rj45 to db9
thanks & best regards

zouhair12 · Answer

good morning all 
please anyone help me for this problem 
thanks & best regards

attori · Answer

hello

It was taking a little bit time but here you have connector layout RJ45 - DB9


http://www.neufgiga.com/n/50-17/share/LNK51834a1bf542eb891/

zouhair12 · Answer

hello Mr attori 
thank you very much about this help 
i check and i found this.   is  it true  or false 
please help me 

rj 45     to      db9

1 nc            1 nc
2 nc            4 nc
3 rxd    to       3 txd
4 gnd    to       5 gnd
5 gnd     to      5 gnd
6 txd      to      2 rxd
7 nc             6 7 8 9  nc 
8 nc 
thanks & best regards

hattori · Answer

Use this type of connector

https://www.pccables.com/01910.htm

Help for omniswitch 6800

6 réponses

Discussions similaires

Newsletters