Packard Bell Alp Ajax driver issues
Solved
jtreb_bas
-
Electron Libre -
Electron Libre -
Hello, I just reinstalled my Packard Bell ALP-AJAX AM PC and now I no longer have drivers to continue the installation and access the internet.
Please help me get these drivers.
Please help me get these drivers.
Configuration: Windows Vista Internet Explorer 7.0
4 réponses
Hello jtreb_bas,
I'm reinstalling Vista on this model of PC, I'll keep you updated but for your information, you can search for your hardware (type of motherboard, or graphics card, etc.) with Everest... and look for the drivers online...
I'm reinstalling Vista on this model of PC, I'll keep you updated but for your information, you can search for your hardware (type of motherboard, or graphics card, etc.) with Everest... and look for the drivers online...
Hello, I just did some maintenance on my Packard Bell Alp-Ajax GN3, that is to say, I cleaned the motherboard and the cooling system. When I put it back together, it starts normally with a single beep, but there is no display; the screen is on but without any display. Please, what could be the problem, and what should I do? From Rnd.
Hello
Restart in BIOS mode and restore the "default configuration," then exit by pressing F10
To enter the BIOS, it should be indicated during the startup of your computer (F2 or F12 or another key)
Best regards
Restart in BIOS mode and restore the "default configuration," then exit by pressing F10
To enter the BIOS, it should be indicated during the startup of your computer (F2 or F12 or another key)
Best regards
Good evening,
I suppose you need the Vista CD to return to the original configuration (via the BIOS)??? Because I would really like to format my Packard Bell Allure D, but I don't have the Vista CD because it was already on the computer!!! And when I try to make the recovery CD I get an error message!!! So I don't know how to format it!!! If someone could help me that would be really nice because I'm stuck right now :( !!!
PS: I think I'm going to format it and switch to XP. Nothing beats XP in my opinion! I hope I can find all the drivers online!!! Otherwise, I'm in trouble!!!
Thank you in advance for your quick help ;)
I suppose you need the Vista CD to return to the original configuration (via the BIOS)??? Because I would really like to format my Packard Bell Allure D, but I don't have the Vista CD because it was already on the computer!!! And when I try to make the recovery CD I get an error message!!! So I don't know how to format it!!! If someone could help me that would be really nice because I'm stuck right now :( !!!
PS: I think I'm going to format it and switch to XP. Nothing beats XP in my opinion! I hope I can find all the drivers online!!! Otherwise, I'm in trouble!!!
Thank you in advance for your quick help ;)
switched to win7 and the technical support responds that we need to go back to Vista Bravo! as a trainer, I do not recommend buying Packard rubbish ...