Bip au démarrage
tachaud
-
tachaud -
tachaud -
Bonjour, je vien de monter une tour, tout fonctionne correctement mais quan je le démarre on entend plusieur bips.(au moin 7) et je voulai savoir si sa ne pouré pa venir du processeur qui n'est pas reconnu par la carte mère .
Nom de la carte mère MSI DKA790GX Platinum
ATI Radeon HD 4800 Series (512 Mo)
le processeur un phenom 2 920
et 4 go Kingston HyperX KHX6400D2LL/1GN
merci pour vos réponses
Nom de la carte mère MSI DKA790GX Platinum
ATI Radeon HD 4800 Series (512 Mo)
le processeur un phenom 2 920
et 4 go Kingston HyperX KHX6400D2LL/1GN
merci pour vos réponses
A voir également:
- Bip au démarrage
- Ordinateur lent au démarrage - Guide
- Reinitialiser pc au demarrage - Guide
- Forcer demarrage pc - Guide
- Problème démarrage windows 10 - Guide
- Qu'est ce qui se lance au démarrage de l'ordinateur - Guide
3 réponses
Salut. Ta cm est compatible avec le Phenom 2 dixit le site de MSI.
http://global.msi.com.tw/index.php?func=prodcpu2&prod_no=1552&maincat_no=1#menu
Par contre ton BIOS n'est peut-être pas à jour. Je suppose que tu ne peux pas y accéder?
http://global.msi.com.tw/index.php?func=prodcpu2&prod_no=1552&maincat_no=1#menu
Par contre ton BIOS n'est peut-être pas à jour. Je suppose que tu ne peux pas y accéder?
Hmm il faut voir si ton Phenom 2 est bien reconnu et tourne à sa fréquence normale. vois ça avec CPU-Z.
salut, jai visité le site de MSI et jai vu qon peut flasher sous windows. es que c fiable pour toi .
avant l'opéation il me demande de créé une disquette je supose que je peu utilser une clef USB?
et au cas ou sa marche pas il me dise de remetre la diskette au démarrage et d' appuyer simultanément sur CTRL et la touche HOME (c qoi cette touche HOME)
merci pour t'etre intérésser a mon problème
avant l'opéation il me demande de créé une disquette je supose que je peu utilser une clef USB?
et au cas ou sa marche pas il me dise de remetre la diskette au démarrage et d' appuyer simultanément sur CTRL et la touche HOME (c qoi cette touche HOME)
merci pour t'etre intérésser a mon problème
Bonjour,
Voici la liste et la signification des bip au demarrage
AWARD Bios Beep Codes
------------------------------------------
1 short beep - System booting sucessfully.
2 short beeps - CMOS setting error.
1 long - 1 short beeps - Memory Error.
1 long - 2 short beeps - VGA card or monitor connect problem
1 long - 3 short beeps - Keyboard Error
1 long - 9 short beeps - ROM Error
Long continuous beep - Memory not installed correctly.
Short continuous beep - Power supply has problem.
= Trouble Shooting =
* Check the power supply - is it supplying power to the motherboard?
* Next, make sure all components and properly installed/fixed.
Usual suspects: CPU, BIOS chip, memory chips, etc.
* Next, check your components and user's manual: are all jumpers set
correctly?
* Remove all cards except the video adapter to make sure no other cards
are causing the problem.
* If this works, try to identify the card causing the problem.
* If none of the above works, contact your dealer or FIC support.
* Try reseating the memory (take it off and install it again).
If the error still occurs, replace the memory with known good chips.
* If you hear fatal beeps, the motherboard needs repair/servicing.
* If the error persists, check parts of the system relating to the
keyboard, e.g. try another keyboard, check to see if the system has a
keyboard fuse.
Try reseating the keyboard controller chip.
If the error still occurs, replace the keyboard chip.
* Memory error on the video adapter.
Replace the video card or the memory on the video card.
* Faulty BIOS chip.
Consult a distributor of Flash EPROM chips that can be used with the
motherboard.
Voici la liste et la signification des bip au demarrage
AWARD Bios Beep Codes
------------------------------------------
1 short beep - System booting sucessfully.
2 short beeps - CMOS setting error.
1 long - 1 short beeps - Memory Error.
1 long - 2 short beeps - VGA card or monitor connect problem
1 long - 3 short beeps - Keyboard Error
1 long - 9 short beeps - ROM Error
Long continuous beep - Memory not installed correctly.
Short continuous beep - Power supply has problem.
= Trouble Shooting =
* Check the power supply - is it supplying power to the motherboard?
* Next, make sure all components and properly installed/fixed.
Usual suspects: CPU, BIOS chip, memory chips, etc.
* Next, check your components and user's manual: are all jumpers set
correctly?
* Remove all cards except the video adapter to make sure no other cards
are causing the problem.
* If this works, try to identify the card causing the problem.
* If none of the above works, contact your dealer or FIC support.
* Try reseating the memory (take it off and install it again).
If the error still occurs, replace the memory with known good chips.
* If you hear fatal beeps, the motherboard needs repair/servicing.
* If the error persists, check parts of the system relating to the
keyboard, e.g. try another keyboard, check to see if the system has a
keyboard fuse.
Try reseating the keyboard controller chip.
If the error still occurs, replace the keyboard chip.
* Memory error on the video adapter.
Replace the video card or the memory on the video card.
* Faulty BIOS chip.
Consult a distributor of Flash EPROM chips that can be used with the
motherboard.
je peu laisser le bios comme il est, avant javé une MN2N32SLI deluxe avec un proc amd 6400+ pas reconnu et javé pas de bip