View original (French)

Access to http://sitecom.extender

Solved
louisjacquesm -  
Hello,
I just bought an N300 Sitecom range extender. I'm trying to install it. The instructions tell me to go to the Internet page http://sitecom.extender. I've tried a thousand times. Each time, I joyfully receive the message: "this page cannot be displayed". Thank you for your help. As you can probably tell, I don't know anything about computers.
Louisjacquesm

3 answers

  • Votes
  • Date
  • Descending date
  1. djonstevi
    Hello
    I have a solution, you need to set the address to

    192.168.0.5 I TESTED IT, IT WORKS..
    Login Name: admin
    Password: admin
    1. Foxstill
      Hi,
      Indeed, this site is not working:


      But http://sitecom.extender.com on the other hand, yes.
      Try it

      --
      Best regards, Foxstill
      1. louisjacquesm Author
        Thank you very much for the quick response. I tried http://sitecome.extender.com:, it does exist, but it's a commercial site that has nothing to do with it. According to the installation manual for the Sitecome Range Extender N300, I should be able to enter a "wizard" window.
      2. Foxstill
        @louisjacquesmIt's normal; you need to connect to the device's Wifi network first (even if there's no internet yet).
        It's then that you should go to http://sitecom.extender to access your box's settings.
      4. Anonymous user
        No way to connect to the "Sitecom wifi range extender n300".
        I am following the explanatory video from the technical support whose link is as follows:
        http://www.sitecomlearningcentre.com/fr/products/wlx-2006v1001/wi-fi-range-extender-n300
        But nothing works, no wizard and no "username" or "password".
        How do you connect to the device's wifi network?
        When I click on the "networks" icon, I do see Sitecom with the wifi signal, but when I click "connect", I only get Sitecom with an exclamation mark and the label "Limited" and no internet?
        The site http://sitecom.extender redirects to an unavailable address...
        Thank you in advance, Foxstill, for your help.
      5. RomainMyz
        @Anonymous userHello mailvit! I'm in the same situation as you, have you finally solved the problem? If so, thank you for helping me!
    2. fady01258
      Hello, have you found a solution please? I still can't access the site http://sitecom.extender..
      Thank you for your help
      1. Zitou63
        Plug the Extender into the power outlet (220 Volts) and then turn it on.
        Use a smartphone, tablet, or laptop with a WiFi connection.
        Look for a network named Sitecom3fc9fd or similar.
        With the smartphone or tablet, connect to this network.
        Open your browser and enter http://sitecom.extender
        The page should open there. In the top right corner of the page, select the language (Fr)
        You will see Username: admin
        Enter the password: admin
        Then follow the configuration instructions via wizard; F, G, H, I, and J.
        After about 1 minute, the signal strength LED will be solid. If it is blinking, you are too far from the modem.
      2. Bob
        The following IP address works (extender connected by cable to unpack):
        192.168.128.253