problème carte SON

Question

Bonjour
un autre problème sniffff

problème de son, j'ai activer dans KDE et toujour rien parcontre, j'ai vu ceci dans le centre de contrôle mandrake 10.1 community

Identification

Vendeur: ‎Intel Corp.

Description: ‎I/O Controller Hub Audio

Classe de matériel: ‎NOT_DEFINED

Connexion
Bus: ‎PCI

Bus PCI n°: ‎0

Périphérique PCI n°: ‎27

Fonction PCI n°: ‎0

Identifiant du Vendeur: ‎32902

Identifiant du périphérique: ‎9832

Identifiant secondaire du vendeur: ‎5681

Identifiant secondaire du périphérique: ‎57361

Divers
Module: ‎inconnu

Que dois faire? merci beaucoups

kiwii · Answer

j'ai oublier le principal dsl je suis sous mandrack 10.1 communityj'ai un Intel Pentium 4 model 515  Disque dur S-ATA 200 Go Seagate Alpine ST3200021A (Barracuda 7200.7) NEC ND-3500A DVD±RW DL drive carte mère Sunshine (GA-8I915PM Ver 1.1) Contrôleur Graphique Nom : ATI Radeon X300 (RV370 SE)Type : Carte vidéo 2D/3DFabricant de la puce : ATIFabricant de la carte : PCPartner<!--voila j'espère que ceci va ;-)

kiwii · Answer

j'ai oublier ceci ouuuu lalala dsl Catégorie: 	SonTitre du Fichier: 	Realtek High Definition Audio driversVersion du Fichier: 	5.10.0.5031

kiwii · Answer

re moi J'ai rebooter et se message est apparue : Sound server informational message Erreur while initializing the sound driver:device /dev/dsp can't opened (No such file or directory)Alors je vous explique ceci je ne parle pas l'anglais lolllalors c'est dur, un peux d'aide serais la bienvenue SVP Merci beacoups

kiwii · Answer

j'ai fait lsmod si cela peux aiderModule                  Size  Used bymd5                     3584  1ipv6                  230916  8rfcomm                 32348  0l2cap                  19876  5 rfcommbluetooth              39076  4 rfcomm,l2capaf_packet              16072  0floppy                 55088  08139too                20928  0mii                     4224  1 8139tooide-cd                 37280  0cdrom                  37724  1 ide-cdloop                   12520  0nls_iso8859-15          4224  1ntfs                  147964  1joydev                  8032  0evdev                   7648  0tsdev                   5824  0usbhid                 41088  0usb-storage            65504  0ehci-hcd               26244  0uhci-hcd               28752  0usbcore               103172  6 usbhid,usb-storage,ehci-hcd,uhci-hcdreiserfs              258324  1sd_mod                 19008  4sbp2                   20104  0ohci1394               30564  0ieee1394              291512  2 sbp2,ohci1394ata_piix                6468  3libata                 38020  1 ata_piixscsi_mod              103404  4 usb-storage,sd_mod,sbp2,libata

kiwii · Answer

Les amis kikou aider moi SVP j'ai beau chercher sur google et je ne trouve toujours rien, c'est dur linux sniffff

kiwii · Answer

personne pour m'aider?????????????

renisaac · Answer

sisi, il y a qq'un, le même que tantôt même!le problème, tu ne nous dit pas ce que tu a essayé au niveau du mixeur, ni quel programme tu utilise (totem, xmms, mplayer?); quel type de son tu veux sortir (.mp3, .wma, .ogg, ...), et les driver de ta carte graphique, ok, mais j'avais demandé le modèle (AC '97, intégré à ta carte mère? références de celle-ci).et surtout les test effectué et les message d'erreur correspondant. (lance xmms /home/kiwii/belle_musique.ogg dans une console pour voir ce qu'il raconte)a tout de suite.       Renisaac

kiwii · Answer

sisi, il y a qq'un, le même que tantôt même!  le problème, tu ne nous dit pas ce que tu a essayé au niveau du mixeur, ni quel programme tu utilise (totem, xmms, mplayer?);j'utilise kaffeine ,et il ne sort pas de messages d'erreur.si je lance alsamixergui,j'ai :alsamixer: function snd_ctl_open failed for default: No such file or directory quel type de son tu veux sortir (.mp3, .wma, .ogg, ...), mp3 ,n'importe et les driver de ta carte graphique, ok, mais j'avais demandé le modèle (AC '97, intégré à ta carte mère? références de celle-ci). sur le support packard ,les drivers de ma carte correspondent aSonTitre du Fichier: 	Realtek High Definition Audio driversj'ai aussi regarde dans dmsg et messages ,pas d'erreur apparente sur le module son merci

kiwii · Answer

hahaah je vient de me rendre compte que ma carte (Realtek High Definition Audio drivers)N'est pas du tout reconnue. Il va me f'alloir trouver son driver, le problème ces que les driver de cette carte son est seulement pour XP snifffff

kiwii · Answer

J'ai beau chercher sur google et aucun driver pour cette carte son realteck, seulement pour se windows XP .Je per espoir

renisaac · Answer

re-heu, tu va dire que j'insiste, mais le nom du driver sous windows, j'arrive pas à faire quoi que ce soit avec!ton high definition audio, c'est juste le codage du son (le remplaçant de AC '97), mais ça ne nous dit pas le nom du chips utilisé pour le son. Et realteck a utilisé des chips de différentes compagnie, donc sans cet info, il m'est impossible de te dire quel module tu devra compiler dans ton noyeau. Ou alors donne nous des info sur ta machine pour qu'on puisse le trouver. Je vois que tu as un packard bell, quel modèle, quel carte mère, portable ou pas?     Renisaac

kiwii · Answer

kikou renisaac je suis de retour ;-)

kiwii · Answer

Voici se que j'ai entrepritalsamixer: function snd_ctl_open failed for default: No such deviceet lorsuqe je fait alsaconf il le lence je testeil cherche la carte..........il me dit "No supported PNP or PCI car found. Would you like to probe legacy ISA sound cards/chips? (je dit YES)puis il me dit "probing legacy ISA cards might make your system unstable. Are you sure proceed? (YES)Et là il me donne (X) opl3sa2  Yamaha OPL3SA2+ (je l'ai tester et rien) j'ai fait pareil pour le reste et toujours rien.

kiwii · Answer

Catégorie:ChipsetTitre du Fichier:Intel 915 Express Chipset driversVersion du Fichier:6.0.1.1002Date du Fichier:01-09-2004 12:09:03

kiwii · Answer

Catégorie:ChipsetTitre du Fichier:Intel 915 Express Chipset driversVersion du Fichier:6.0.1.1002Date du Fichier:01-09-2004 12:09:03

kiwii · Answer

ouaiiiiiiiiiiiiiiiiiiiiiiiiiij'ai réussie accompiler tout fonctionnemerci pour ces peux d'aide ;-))))))))))

kiwii · Answer

aillll NON sa ne marche pas c'était cette tele qui c'était déclancher.j'avais compiler en fesant avec (alsa-driver-1.0.4)Installation:^MThis Source Code is from www.alsa-project.org.^MFor driver installation, please follow below steps. ^M^MStep 1. unzip source code^M        tar xfvj alcsound.tar.bz2^M^MStep 2. Turn on sound support (soundcore module, default turn on)^M^MStep 3. Complied source code^M        a. ./configure^M        b. make^M        c. make install^M        d. ./snddevices^M^MStep 4. Edit your /etc/modules.conf or conf.modules depending on the distribution^M        (Please refer to the attached modules.conf)^M^MStep 5. reboot your machine^M

jjjerome · Answer

Salut tout le monde. J'ai exactement le meme souci.J'ai donc telechargé le driver, et installé les sources de mon kernel.cependant, lorsque je lance le ./configure, il pinaille sur un fichier manquant : /usr/src/linux/include/linux/version.hJ'ai vérifié, le fichier est manquant. La je bloque :(Quelqu'un pourrait- il me venir en aide ?merci d'avance.jjjerome

kiwii · Answer

T'as installé les sources ou les headers ou les deux ?j'ai installer ceci: linuxaudio.zip puis j'ai fait unzip et il ma crée Audio.il y a (alsa-driver-1.0.4/ core.h modules.conf Readme.txt turbolinux.txt) je suis rentrer dans cd alsa-driver-1.0.4 ou la il y a acinclude.m4 doc/ modules/ synth/aclocal.m4 drivers/ parisc/ test/acore/ FAQ pci/ TODOalsa-kernel/ hal2/ pcmcia/ toplevel.configarm/ i2c/ ppc/ toplevel.config.inautom4te.cache/ include/ README usb/CARDS-STATUS INSTALL Rules.make utils/config.log install-sh* scripts@ versionconfig.status* isa/ snddevices* version.inconfigure* kbuild/ snddevices.in* WARNINGconfigure.in Makefile sound@COPYING Makefile.conf sparc/cvscompile* Makefile.conf.in support/j'ai donc fait ./configure make  make installet j'en suis là.

kiwii · Answer

je me pose cette question, serait il pas mieux que je face une mise a jour a partire du cd et de configurer ma carte son?je pensse que je vais faire sa car là je sature:-(

Surfy · Answer

Bonjour kiwi Bien juste une question rapide ,ta carte son est-elle intégré à ta carte mère ? A mon avis ton problème est là : Dans ton tout premier message ,et en bas de ce message ,tu à fait une cipie de ton panneau de contrôle ,il est inscrit ceci >>>Divers Module: ?inconnu <<<<< Donc si "module "inconnu ça veut dire si je ne me trompe pas qu'il te manque le driver tout simplement . Donc oui le driver que tu possède n'est que pour window ,il faut trouver celui de LINUX ,je vais tenter de faire une recherche là ... A de suite

renisaac · Answer

re-bon, pour le fichier qui manque, vous avez vérifier l'intégrité de vos téléchargement?http://www.commentcamarche.net/faq/sujet-41-[md5sum]-Vérifier-l'intégrité-des-téléchargementsKiwii, qu'a tu compilé exactement? alsa-driver 1.0.4? tu sais me filer un lien pour que je vois ce qu'il y a la dedans?en plus, sur le site de alsa, ils disent que le version actuelle est la 1.0.8! pourquoi utiliser la 1.0.4?P.S. pas votre faute, mais il est très mal foutu le site de packard bell pour trouver les info, et le site de realtek n'a rien en français!              Renisaac

Surfy · Answer

Voilà un site qui le propose ,reste à vérifier :http://soundcard.free-driver-download.com/RealTek/17400/Realtek-ALC-ALC880-ALC260-ALC861-HD-Audio-CODECs-Driver-R1.0-Linux.htmlEn voilà un deuxième site qui le propose :http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=TrueEn fait le deuxième semble correspondre au premier site ,et le deuxième site n'est autre que le site officiel de "realtek" ,il est vrai que leur site est tres mal fait en matiere de recherche drivers....Attention ,ceci est ne semble pas être un seul et unique "driver" spécifique pour ta carte ,mais un KERNEL qui doit posséder en fait tous les drivers de chez REALTEK ,je ne connais donc pas du tout la procédure ,il faut demander l'avis un un connaisseur ,bien que je ne pense pas que cela soit très compliqué....Dav

renisaac · Answer

ok, j'ai regardé, et je comprend le 1.0.4je râle toujours sur les site de ces deux fabricantkiwii, une fois ton make install fait, tu a fait le ./snddevices? t'arrive à avoir le son?        Renisaac

kiwii · Answer

/lib/modules/2.6.8.1-12mdk/kernelmon kernel souces ne va pas avec le alsa-driver-1.0.4 je pence?

kiwii · Answer

Bonjour a tousVous-allez rire j'avais oublier d'installer le kernel-source-2.6-2.6.8.1-12mdkBon je vais compiler je vous tien aucourant ;-)

kiwii · Answer

Après avoir fait: ./configure                    make voici le message d'erreur je ne comprend pas :-(   make[3]: *** [/home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.o] Erreur 1make[2]: *** [/home/angele/alsa-driver-1.0.4/kbuild/../pci] Erreur 2make[1]: *** [_module_/home/angele/alsa-driver-1.0.4/kbuild] Erreur 2make[1]: Leaving directory `/usr/src/linux-2.6.8.1-12mdk'make: *** [compile] Erreur 2

kiwii · Answer

SOS j'ai vraiment besoin d'aide SVPPPPPPPPPPPPPPP

jjjerome · Answer

Il te faut  les headers.C'est tout expliqué ici :http://crackerjoe.free.fr/viewtopic.php?t=20enfin si j'ai bien compris ...

kiwii · Answer

voila se que j'ai en kernel est ce que c'est bon?[angele@localhost angele]$ rpm -qa | grep kernekernel-2.6.8.1.12mdk-1-1mdkkernel-source-2.6-2.6.8.1-12mdk

kiwii · Answer

voila se que j'ai lorsque je fait make

via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:1,
from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/include/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
In file included from /home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:1:
/home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/kbuild/../pci/../alsa-kernel/pci/via82xx.c:2: warning: data definition has no type or storage class
/home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:2: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
/home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.c:2: warning: data definition has no type or storage class
make[3]: *** [/home/angele/alsa-driver-1.0.4/kbuild/../pci/via82xx.o] Erreur 1
make[2]: *** [/home/angele/alsa-driver-1.0.4/kbuild/../pci] Erreur 2
make[1]: *** [_module_/home/angele/alsa-driver-1.0.4/kbuild] Erreur 2
make[1]: Leaving directory `/usr/src/linux-2.6.8.1-12mdk'

kiwii · Answer

kikou personne renisaac  jjerome sososososos snifffff

kiwii · Answer

OUUUUU les amis un peux d'aide ne serra pas de refu ;-)))))))))
j'ai beaux chercher sur google sur ces messages d'erreur : make[2]: *** [/home/angele/driver/alsa-driver-1.0.4/kbuild/../pci] Erreur 2
make[1]: *** [_module_/home/angele/driver/alsa-driver-1.0.4/kbuild] Erreur 2
make[1]: Leaving directory `/usr/src/linux-2.6.8.1-12mdk'
make: *** [compile] Erreur 2
et je ne trouve aucune solution :-(((((((((((

kiwii · Answer

il n'y a pas le kernel sources !dans mcc (mais je pensse que se n'est pas grave puisque je l'ai installer)

kiwii · Answer

lors du make j'ai remarquer qu'il bloquais un petit moment dessus ceci

make[2]: Leaving directory `/home/angele/driver/alsa-driver-1.0.4/pcmcia'
make[1]: Leaving directory `/home/angele/driver/alsa-driver-1.0.4'
make -C /lib/modules/2.6.8.1-12mdk/build SUBDIRS=/home/angele/driver/alsa-driver-1.0.4/kbuild modules
make[1]: Entering directory `/usr/src/linux-2.6.8.1-12mdk

kiwii · Answer

on vien tout juste de me dire que mon module pour ma carte son se nomme

snd-via82xx.ko

j'ai fait ceci : modprobe -a snd-via82xx
réponse: rien ne se passe

[root@localhost alsa-utils-0.9.6]# /etc/modules.conf

/etc/modules.conf: line 5: alias: char-major-116: not found
/etc/modules.conf: line 5: alias: snd: not found
/etc/modules.conf: line 6: alias: char-major-14: not found
/etc/modules.conf: line 6: alias: soundcore: not found
/etc/modules.conf: line 7: alias: snd-card-1: not found
/etc/modules.conf: line 7: alias: snd-card-cs4231: not found
/etc/modules.conf: line 8: alias: sound-slot-1: not found
/etc/modules.conf: line 8: alias: snd-card-1: not found
/etc/modules.conf: line 9: alias: sound-service-1-0: not found
/etc/modules.conf: line 9: alias: snd-mixer-oss: not found
/etc/modules.conf: line 10: alias: sound-service-1-1: not found
/etc/modules.conf: line 10: alias: snd-seq-oss: not found
/etc/modules.conf: line 11: alias: sound-service-1-3: not found
/etc/modules.conf: line 11: alias: snd-pcm1-oss: not found
/etc/modules.conf: line 12: alias: sound-service-1-12: not found
/etc/modules.conf: line 12: alias: snd-pcm1-oss: not found
/etc/modules.conf: line 13: alias: snd-card-2: not found
/etc/modules.conf: line 13: alias: snd-card-cs461x: not found
/etc/modules.conf: line 14: alias: sound-slot-2: not found
/etc/modules.conf: line 14: alias: snd-card-2: not found
/etc/modules.conf: line 15: alias: sound-service-2-0: not found
/etc/modules.conf: line 15: alias: snd-mixer-oss: not found
/etc/modules.conf: line 16: alias: sound-service-2-1: not found
/etc/modules.conf: line 16: alias: snd-seq-oss: not found
/etc/modules.conf: line 17: alias: sound-service-2-3: not found
/etc/modules.conf: line 17: alias: snd-pcm1-oss: not found
/etc/modules.conf: line 18: alias: sound-service-2-12: not found
/etc/modules.conf: line 18: alias: snd-pcm1-oss: not found
/etc/modules.conf: line 19: options: command not found
/etc/modules.conf: line 20: options: command not found
/etc/modules.conf: line 21: options: command not found

kiwii · Answer

OUUUUUUUU svpppppp soosososo

renisaac · Answer

Salut kiwii, et les autres,

heu, d'où il sort ton snd-via82xx??? C'est le driver de mon ancienne carte son, intégrée à la carte mère, et je l'avais installer sur ma debian en recompilant le noyeau on ne peut plus standart. Et cette carte était reconnue par mandrake 9.2 et 10.0 sans le moindre problème. Si il va, logiquement les indications de Surfy devrais suffire, sinon, va voir dans file:/lib/modules/2.6.8.1...mdk/kernel/sound/pci quel sont les modules compilé.

Renisaac

kiwiiii · Answer

Bonjour a tous, et merci pour votre soutien
j'ai dessider de passer sur la mandrake 9.0
je panssais que ma carte son realteck alc880 allais être reconnu et par ma grande surpprise se n'est pas le qu'a
ma carte son realteck alc880 n'est pas reconnue sur ma mandrake 9.0.
j'ai donc fait sndconfig je trouve mon driver (Carte son PCI VIA 82CXXX) mais lorsque je fait: OK il me dit:

L'erreur suivante s'est produite lors de l'exécution
du programme modprobe :
insmod:
/lib/modules/2.4.19-16mdk/kernel/drivers/sound/via82cx
xx_audio.o.gz: No such file or directory
modprobe: insmod
/lib/modules/2.4.19-16mdk/kernel/drivers/sound/via82cx
xx_audio.o.gz failed
modprobe: insmod sound-slot-0 faile

alors j'ai fait locate via82cxxx_audio.o.gz il dit:

/lib/modules/2.4.19-16mdk/kernel/drivers/sound/via82cxxx_audio.o

je vais donc:
[root@localhost etc]# insmod /lib/modules/2.4.19-16mdk/kernel/driver/sound/via82cxxx_audio.o
insmod: /lib/modules/2.4.19-16mdk/kernel/driver/sound/via82cxxx_audio.o: No such file or directory
pouvez-vous m'aider merci d'avance

ps/Bonjour a tous, et merci pour votre soutien

ma carte son realteck alc880 n'est pas reconnue sur ma mandrake 9.0.
j'ai donc fait sndconfig je trouve mon driver (Carte son PCI VIA 82CXXX) mais lorsque je fait: OK il me dit:

L'erreur suivante s'est produite lors de l'exécution
du programme modprobe :
insmod:
/lib/modules/2.4.19-16mdk/kernel/drivers/sound/via82cx
xx_audio.o.gz: No such file or directory
modprobe: insmod
/lib/modules/2.4.19-16mdk/kernel/drivers/sound/via82cx
xx_audio.o.gz failed
modprobe: insmod sound-slot-0 faile

alors j'ai fait locate via82cxxx_audio.o.gz il dit:

/lib/modules/2.4.19-16mdk/kernel/drivers/sound/via82cxxx_audio.o

je vais donc:
[root@localhost etc]# insmod /lib/modules/2.4.19-16mdk/kernel/driver/sound/via82cxxx_audio.o
insmod: /lib/modules/2.4.19-16mdk/kernel/driver/sound/via82cxxx_audio.o: No such file or directory
pouvez-vous m'aider merci d'avance

kiwiiii · Answer

kikou les amis je suis là de retoure aider moi SVPmerci ;-)

kiwiiii · Answer

kikou les maies j'ai vraiment besoin d'un cou de main SVP merci ;-)

renisaac · Answer

héé, calme,

on n'est pas en permanance sur le net, tu sais... Personnellement, il m'arrive même de faire autre chose que d'aider sur ce forum!

heu, pourquoi t'a essayé la 9? a priori, la 10 supporte du matériel plus récent, et c'est justement le cas de ta carte son.

Tu m'as pas répondu, qu'a donné la manip proposée par surfy, d'ou sort le module snd_82cxxx? Pour moi, il gère le son AC'97, ancien standart qui est progressivement remplacé par le high définition audio de ta carte son. Le problème, le nouveau standart n'est vraiment pas généralisé, et donc la recompilation obligatoire, suivant les (bien trop rare) instructions du site de realtek.

Renisaac

kiwiiii · Answer

Et je viens de comprendre une chose ma carte son est "
(cartes mères équipées d'un chipset audio ALC880 Realtek)

j'ai donc telecharger a cette adresse

(http://www.touslesdrivers.com/index.php?v_page=23&v_code=7649

le driver Constructeur:
Realtek

aff_num='1011802';
cle='carte son Realtek';
kcatid='111501';
kkpartnerid='8909789';
kpowered='texte';
kad_w='200';
kad_h='150';
kad_font='Arial';
kad_font_size='11';
kad_img_border_color='FFFFFF';
kad_table_border_color='000000';
kad_table_background_color='FFFFFF';
kad_price_color='FF9900';
kad_titre='000000';
kxsl='kpc_1bipro';

Powered by Kelkoo

Matériels compatibles:
ALC101/201/202/203/250/260/650/655/658/850/861/880/882

Type de matériel:
Cartes sons / chipsets audio

Systèmes d'exploitation:
Linux

Type de mise à jour:
Drivers

Version:
r3.1

Taille du fichier: 2 Mo

que doige faire maintenant, qu'il est telecharger?

merci

renisaac · Answer

re-

J'imagine que ton copain a voulu bien faire, mais j'y crois vraiment pas du tout pour les raison que je t'ai dit précédemant.

Le truc que tu viens de télécharger, c'est un Zip, et j'ai l'impression que c'est le même que ce que tu avais pris sur le site realtek. Quoi qu'il en soit, il doit y avoir un truc nome readme.txt, ou install.txt, à lire et bien comprendre.

là, j'ai pas le temps de télécharger/lire, mais relis, et regarde ced que tu comprends pas pour poser tes questions.

Renisaac

kiwiiii · Answer

tout c'est fordaminablement bien passer le ./configure
et le make et make install impec le modules installer et reconnue en fesant modprobe snd-xxxx (rien se passe se qui veux dire BRAVO!!!!
donc j'ai fait lsmod et hop! je vois mon sound!!!!
je décide alors de rebooter.

Mais la surprise toujours rien, j'ai donc regarder dans mon
mcc et que voige PAS DE CARTE SON DETECTER, cela ve dire que tout se que j'ai fait jusca présent était du vent.......
car sans carte reconnue a quoi bon d'installer son module!!!
lolll. là j'ai vraiment les boules, je ne c'est plus quoi faire snifffff je souhaiterais vraiment que cette carte son marche sur linux!
C'est quand meme dur d'aller sur XP pour pouvoir écouter de la musique, sur tout XP et moi on ne s'aime pas du tout. Il plante tout le temp, c'est un GROS TROUS DE SECURITER.
Mais bon je vous apprends rien lolll.

Bon et bien les amies voilà encor ou j'en suis au meme poin de départ. ;-)

kiwiiii · Answer

bonjour les amis toujours au meme poin

renisaac · Answer

ha si, tu m'apprend qqch : xp plante ;-)

Sérieux, chez moi, depuis win 2000, j'ai plus aucun problème de plantage! ok, je l'utilise pas de masse, mais entretenant un minimum, il y a moyen de le rendre stable!

perso, je ne m'exciterait pas trop avec le centre de controle, car c'est une interface graphique qui peut avoir ses propres bugs. Pour être sur que ton module est bien installé sur ton ordi : lsmod, et pour voir si ta carte est bien reconnue, vérifier que les paquets music123 et mpeg321 (ou autre lecteur/codecs en ligne de commande) sont bien installé (avec les urpm, cfrhttp://www.commentcamarche.net/faq/1328-[Linux]-Installer-les-programmes-gestion-des-paquets-compil ) , puis % music123 mon_fichier.mp3, et voir les éventuels messages d'erreurs. Enfin si tout va bien, aller voir les plugin de ton lecteur graphique préféré.

Renisaac

renisaac · Answer

Bonjour,

Suite aux questions répétées à propos du son, j'ai écris un petit tuto ou j'ai repris tous ce que j'ai expliqué ici de manière dispercée. Voulez-vous allez voir si il vous parait clair, et me dire ce qu'il y a moyen d'améliorer.

il est là : http://www.commentcamarche.net/forum/affich-557236-comment-configurer-le-son-sous-linux-9-0

Renisaac

Problème carte SON

48 réponses

Discussions similaires

Newsletters