View original (French)

Labtec Keyboard

pinpin64 -  
 pinpin64 -
Hello,
I have a Labtec keyboard that I've had for quite some time and it suits me just fine.
However, today the cable got unplugged and since I plugged it back in, it's not working anymore. I want to clarify that this is a simple keyboard and there is no installation software.
Thank you in advance for your help
Configuration: Windows XP Internet Explorer 7.0

1 answer

  1.
    Pilou_le_picard Posted messages 413 Status Member 31
     
    Good evening,

    did you plug the keyboard back in while the computer was on?
    What type of connector (USB?)
    0
    1. pinpin64
       
      I tried to reconnect it while off and on but the same, however there is no USB but a round socket with a flat.
      0
    2. Pilou_le_picard Posted messages 413 Status Member 31 > pinpin64
       
      Have you tested the keyboard on another computer?
      0
    3. pinpin64 > Pilou_le_picard Posted messages 413 Status Member
       
      No, but trying another keyboard is the same.
      0
    4. Pilou_le_picard Posted messages 413 Status Member 31 > pinpin64
       
      So there are several solutions.

      -Either your PS/2 port is damaged
      -Or the driver(s) are damaged
      -Or the card has been hit

      Try first to switch the PS/2 port of the mouse (green) to the keyboard (purple).. sometimes it may work, because the mouse only uses 60% of the capacity of the PS/2 ports

      (sorry, I took the liberty of addressing you informally all this time)
      0
    5. pinpin64 > Pilou_le_picard Posted messages 413 Status Member
       
      I tried it on the green port but nothing (plus, I have the mouse in USB), however, if I plug the keyboard into the purple or green port, it lights up for 1 second and then turns off again.
      0