EXTEL 1322 E PRO ou 1322 S PRO Digicode
JACKPOT
-
JACKPOT -
JACKPOT -
Hello,
Small problem, my digital code lock no longer accepts my entry code,
I had a power outage for about 5 hours but normally it is designed to retain the memory.
Does anyone have the user manual or the operating procedure to reprogram a new code?
Thank you in advance
Best regards
Jack
Small problem, my digital code lock no longer accepts my entry code,
I had a power outage for about 5 hours but normally it is designed to retain the memory.
Does anyone have the user manual or the operating procedure to reprogram a new code?
Thank you in advance
Best regards
Jack
Configuration: Windows XP Internet Explorer 6.0
3 réponses
I had the same problem, due to a dying battery. I decided to replace this keypad, which is about 15 years old.
The procedure is as follows but depends on the type of keypad; you need two people.
It involves reprogramming from scratch:
1 Disconnect the power from the keypad
2 Press the enter key and hold it down
3 Restore power and count 10 to 20 seconds
4 Release the enter key
5 Press 1 eight or six times and then enter. The machine is then ready to accept the master key and user key
for a brief period of excitation of the latch, press 01 and not 1
Good luck.
The procedure is as follows but depends on the type of keypad; you need two people.
It involves reprogramming from scratch:
1 Disconnect the power from the keypad
2 Press the enter key and hold it down
3 Restore power and count 10 to 20 seconds
4 Release the enter key
5 Press 1 eight or six times and then enter. The machine is then ready to accept the master key and user key
for a brief period of excitation of the latch, press 01 and not 1
Good luck.
Thank you for your response, but I got the information on 12/07/2007 from the site "http://www.niouze.org/rec-bricolage"
Indeed, the manipulation works well, no more problems.
Thanks again
Best regards
Jack