View original (French)

Flashing issue with Golden Interstar

el mahdi -  
 Ptilouis -
Hello, I have a problem with my stb golden interstar-8001 premium class.

I downloaded stbdownload-multi 1.9.1 and the program to flash tps, but when I connect, even by following the instructions to the letter, it doesn't want to load. Does anyone have a more effective solution?

Thanks in advance.

P.S: Sorry for the spelling mistakes.
Configuration: windows xp prof Safari 525.17

4 réponses

Réponse 1 / 4
alekos5050 Posted messages 19 Status Membre 3
 
Have you downloaded the file (bin)? You also need to unzip it with WinRAR or Zip, and you will have a bin file.
Go to this site http://ww1.webobo.com
0
Réponse 2 / 4
alekos5050 Posted messages 19 Status Membre 3
 
how to flash a golden interstar update
======================WARNING==================
Unplug all cables connected to your GOLDEN INTERSTAR dsr 8001premium decoder
ANTENNA-SCART AND ESPECIALLY POWER
===============================================
Turn off the decoder if it is not already done

Updating the decoder

Double click on the downloader STBUpgrade
1- choose the com port
2-leave the transfer speed at 115200 -2
3- choose program only
4- choose download
5- click on load and search for the file

previously downloaded on your pc

Press the "connect" button and plug in the power cord of the
decoder and wait.
The transfer completion message displayed is: Upload Completed.

NOW a little tip
Take the remote control
Tune to a scrambled channel like t*s star
Press the zero 0 button
A table will appear
Load the default configuration with the blue button
1st line select viaccess
2nd line select t*s France
Confirm with the ok button
Then you will see
The first line of the lower table highlighted
enter your values and validate with the red button r;;;ouge
0
Réponse 3 / 4
kakie
 

My Gs805 receiver is no longer responding to any commands. It is connected and does not send any signal to the television. I haven't had it for long, barely a year. I don't understand what's happening. Can someone help me? Thank you in advance.
0
Réponse 4 / 4
Ptilouis
 
Hi.
You need to unplug your antenna cable and turn on the decoder. Once it's on, you can plug the antenna cable back in, but you must not turn off the device again, otherwise you will have to repeat the operation every time. I hope this helps you!!! See you+++++++.
0