View original (French)

Flashing issue with Golden Interstar

el mahdi -  
 Ptilouis -
Hello, I have a problem with my stb golden interstar-8001 premium class.

I downloaded stbdownload-multi 1.9.1 and the program to flash tps, but when I connect, even by following the instructions to the letter, it doesn't want to load. Does anyone have a more effective solution?

Thanks in advance.

P.S: Sorry for the spelling mistakes.
Configuration: windows xp prof Safari 525.17

4 answers

  1.
    alekos5050 Posted messages 19 Status Member 3
     
    Have you downloaded the file (bin)? You also need to unzip it with WinRAR or Zip, and you will have a bin file.
    Go to this site http://ww1.webobo.com
    0
  2. alekos5050 Posted messages 19 Status Member 3
     
    how to flash a golden interstar update
    ======================WARNING==================
    Unplug all cables connected to your GOLDEN INTERSTAR dsr 8001premium decoder
    ANTENNA-SCART AND ESPECIALLY POWER
    ===============================================
    Turn off the decoder if it is not already done

    Updating the decoder

    Double click on the downloader STBUpgrade
    1- choose the com port
    2-leave the transfer speed at 115200 -2
    3- choose program only
    4- choose download
    5- click on load and search for the file

    previously downloaded on your pc

    Press the "connect" button and plug in the power cord of the
    decoder and wait.
    The transfer completion message displayed is: Upload Completed.

    NOW a little tip
    Take the remote control
    Tune to a scrambled channel like t*s star
    Press the zero 0 button
    A table will appear
    Load the default configuration with the blue button
    1st line select viaccess
    2nd line select t*s France
    Confirm with the ok button
    Then you will see
    The first line of the lower table highlighted
    enter your values and validate with the red button r;;;ouge
    0
  3. kakie
     

    My Gs805 receiver is no longer responding to any commands. It is connected and does not send any signal to the television. I haven't had it for long, barely a year. I don't understand what's happening. Can someone help me? Thank you in advance.

    0
  4. Ptilouis
     
    Hi.
    You need to unplug your antenna cable and turn on the decoder. Once it's on, you can plug the antenna cable back in, but you must not turn off the device again, otherwise you will have to repeat the operation every time. I hope this helps you!!! See you+++++++.
    0