Booter a partir dune image flash cisco
Bonjour,
j'ai un switch cisco 2940 pour mes lab et j'ai effacé l'image flash par inadvertance.
Maintenant j'aimerais restaurer cette image afin de charger L'IOS pour me permettre de
configurer.Voici les messages
d'erreur que je reçois:
C2940 Boot Loader (C2940-HBOOT-M) Version 12.1(13r)AY1, RELEASE SOFTWARE (fc1)
Compiled Mon 30-Jun-03 15:16 by antonino
WS-C2940-8TT-S starting...
Base ethernet MAC Address: 00:0f:34:cc:38:40
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch: flash_init
Initializing Flash...
flashfs[0]: 81 files, 4 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7612416
flashfs[0]: Bytes used: 3005440
flashfs[0]: Bytes available: 4606976
flashfs[0]: flashfs fsck took 5 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Variable Block Filesystem (vb:) installed, fsid: 5
Setting console baud rate to 9600...
switch: load_helper
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch: dir flash:
Directory of flash:/
2 -rwx 274 <date> info
3 -rwx 1910 <date> config.old
5 -rwx 2348 <date> cr.3745.lbv.ga.celtelplus.com-confg
6 drwx 128 <date> c2940-i6q4l2-mz.121-19.EA1c
86 -rwx 274 <date> info.ver
87 -rwx 760 <date> vlan.dat
4606976 bytes available (3005440 bytes used)
switch: boot flash:/c2940-i6q4l2-mz.121-19.EA1c
Loading "flash:/c2940-i6q4l2-mz.121-19.EA1c"...flash:/c2940-i6q4l2-mz.121-19.EA1c: is a directory
Error loading "flash:/c2940-i6q4l2-mz.121-19.EA1c"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
Merci de m'aider
j'ai un switch cisco 2940 pour mes lab et j'ai effacé l'image flash par inadvertance.
Maintenant j'aimerais restaurer cette image afin de charger L'IOS pour me permettre de
configurer.Voici les messages
d'erreur que je reçois:
C2940 Boot Loader (C2940-HBOOT-M) Version 12.1(13r)AY1, RELEASE SOFTWARE (fc1)
Compiled Mon 30-Jun-03 15:16 by antonino
WS-C2940-8TT-S starting...
Base ethernet MAC Address: 00:0f:34:cc:38:40
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch: flash_init
Initializing Flash...
flashfs[0]: 81 files, 4 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7612416
flashfs[0]: Bytes used: 3005440
flashfs[0]: Bytes available: 4606976
flashfs[0]: flashfs fsck took 5 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Variable Block Filesystem (vb:) installed, fsid: 5
Setting console baud rate to 9600...
switch: load_helper
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch: dir flash:
Directory of flash:/
2 -rwx 274 <date> info
3 -rwx 1910 <date> config.old
5 -rwx 2348 <date> cr.3745.lbv.ga.celtelplus.com-confg
6 drwx 128 <date> c2940-i6q4l2-mz.121-19.EA1c
86 -rwx 274 <date> info.ver
87 -rwx 760 <date> vlan.dat
4606976 bytes available (3005440 bytes used)
switch: boot flash:/c2940-i6q4l2-mz.121-19.EA1c
Loading "flash:/c2940-i6q4l2-mz.121-19.EA1c"...flash:/c2940-i6q4l2-mz.121-19.EA1c: is a directory
Error loading "flash:/c2940-i6q4l2-mz.121-19.EA1c"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
Merci de m'aider
Configuration: Windows XP Firefox 2.0.0.16
7 réponses
-
salut
suivi sa
switch: flash_init
Initializing Flash...
...The flash is already initialized.
switch:
apres
switch: load_helper
switch:
switch: dir flash:
Directory of flash:/
2 -rwx 976 <date> vlan.dat
3 -rwx 386 <date> system_env_vars
4 -rwx 5 <date> private-config.text
6 -rwx 1554 <date> config.text
24 drwx 192 <date> c3550-i5q3l2-mz.121-13.EA1
switch:
switch: dir flash:c3550-i5q3l2-mz.121-13.EA1
switch:
switch: boot flash:c2950-i6q4l2-mz.121-13.EA1.bin
si tu aura sa
Loading "flash:c2950-i6q4l2-mz.121-13.EA1.bin"...###########
###########################################################
je te dit buno t a gagner
bon courage -
Hello
je rencontre le même problème et j'arrive pas à recharger l'image que je viens de telecharger
comment configurer tftpd32 (vu qu'à priori c'est grace à lui que je peux recharger)
merci -
SALUT
suivi sa
switch: flash_init
Initializing Flash...
...The flash is already initialized.
switch:
switch: load_helper
switch:
switch: dir flash:
Directory of flash:/
3 -rwx 2888547 <date> c2950-i6q4l2-mz.121-13.EA1.bin
ou
switch: dir flash:
Directory of flash:/
2 -rwx 976 <date> vlan.dat
3 -rwx 386 <date> system_env_vars
4 -rwx 5 <date> private-config.text
6 -rwx 1554 <date> config.text
24 drwx 192 <date> c3550-i5q3l2-mz.121-13.EA1
switch: dir flash:c3550-i5q3l2-mz.121-13.EA1
switch:
switch: boot flash:c2950-i6q4l2-mz.121-13.EA1.bin
et voila tu aura ta configuration
bon chance -
Bonjour,
Sur les 2940, l'IOS est dans un répertoire (qui a le même nom) avec le module de gestion Web.
Peux-tu regarder ce qu'il y a dans le répertoire pour voir si le code est là ?
(cd c2940-i6q4l2-mz.121-19.EA1c + dir) -
voici les infos que j'obtiens quand je fais le dir flash:
switch:
switch: dir flash:
Directory of flash:/
2 -rwx 274 <date> info
3 -rwx 1910 <date> config.old
5 -rwx 2348 <date> cr.3745.lbv.ga.celtelplus.com-confg
6 drwx 128 <date> c2940-i6q4l2-mz.121-19.EA1c
86 -rwx 274 <date> info.ver
87 -rwx 760 <date> vlan.dat
4606976 bytes available (3005440 bytes used)
switch: dir flash:/c2940-i6q4l2-mz.121-19.EA1c
Directory of flash:/c2940-i6q4l2-mz.121-19.EA1c/
7 drwx 2432 <date> html
85 -rwx 274 <date> info
4606976 bytes available (3005440 bytes used)
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch: -
Je me demande aussi pourquoi je reçois ce message "permission denied" lorsque je tape la commande boot:
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch: -
Tu n'as plus d'IOS dans ton répertoire ... donc impossible de booter dessus.
Dans le répertoire c2940-i6q4l2-mz.121-19.EA1c il devrait y avoir un fichier c2940-i6q4l2-mz.121-19.EA1c.bin.
