Dune 80 universal remote code

Question

Hi, can someone help me!! I have a Kaisui TV but I can't find the code for the Dune 80!! Thanks everyone!!!!! Nadia

JPII · Answer

How old is your TV? Is it an antique? I suppose it's Japanese, well, from Asia. Small brands like yours are often sub-brands of large brands like SONY, HITACHI, the components you find inside are the same, except they're not their best components. However, for the code, manufacturers usually keep the same remote control code for many years, so try programming your remote with a SONY, PANASONIC, or JVC, HITACHI code; I know, for example, that the codes for PHILIPS and SCHNEIDER remotes are the same!!!! GOOD LUCK!!!!!!

SYLVIA COSSAIS · Answer

I also have the same problem with the same remote control (dune80) and the same television (kaisui)! Do you have a solution for me? Thank you in advance...

bamboupa · Answer

Here is the answer that was given to me and it works on kaisui http://www.commentcamarche.net/forum/affich-465741-Code-IR-pour-t%E9l%E9commande-universelle-Dune-8

nadia521 · Answer

Hi! Thanks everyone, it's working! See you!

sylvia · Answer

Hello everyone!!! I am really delighted to have called on you, I found the right code for my remote control thanks to you and I thank you again for your attention!!! See you soon

commeureuc · Answer

Hello, I am looking for the code for a Pathe Marconi television. Thank you in advance.

nadia521 · Answer

Hi, for the Kaisui TV there are 3 codes, so try them and you'll see: 0591, 1321, and 1331. If that doesn't work, you can always try the magic code which is 0001! In that case, as soon as you enter it, point your remote at your TV (logical lol) and press the power button the necessary number of times for the device to turn off! As soon as it turns off, quickly press P+ and V- to confirm the code and turn off the indicator! There you go, keep us updated if it worked! Bye

sandra · Answer

Hello everyone, I'm a bit desperate because I have a great universal remote Dune 80050 but I no longer have the manual, and whenever I start searching by pressing the power button, I end up getting cramps!!! Anyway, I have a Thomson TV, does anyone have any codes to help me? Thanks to my future savior ;-)

anthony · Answer

Hello, no need for code, you can do an automatic search, which means:   press SET and TV at the same time = the light turns on, while the light is on, press SET again until the light blinks, then press power until the light blinks (more slowly) then place the remote in front of the TV...  after a while, the TV turns off and then back on, quickly take the remote and press TV    there you go, bye bye.

sandra · Answer

Heuuu it's nice but there is no "SET" button on the dune 80050 !!  so what should I do? !! ;-)))  thanks

sandra · Answer

Thank you Nadia, that's very kind. I tried all the codes, unfortunately nothing works. I think I'm going to have to give up, it doesn't work with this TV pfff I have an idea!! I'm going to buy another TV lol!!! Thanks again.

nadia521 · Answer

You're welcome Even with the auto search it didn't work Too bad Yes, or another universal remote, it will be cheaper lol Well, good luck

Pouty · Answer

Hello, I have a dune 80 remote control I would like to use it for my Philips VCR I no longer have the code I don't remember how to proceed Can you help me? Thank you for your attention.

pouty · Answer

Hi Nadia, yes I tried the magic code and it doesn't work... if anyone has a solution... thanks anyway have a nice day pouty

jeremie · Answer

Hello  I have a Goldstar TV and a Dune 80 remote control, but I lost the manual with the codes.  Could someone provide me with the codes for the Goldstar brand or send me the list via email?  Thank you in advance for your response See you soon

Jo · Answer

Hello everyone For Pouty: 0052 0082 0092 0152 0182 0362 0372 0382 0472 0502 1072 For Jeremy: 0591 0601 0761 0791 1371 1491 1511 1561 1621 1641

sylvestre · Answer

Hello everyone, I would like to know if you can give me the code for a Philips TV  thank you also to all the other codes you have given us (for my brother)  have a good vacation everyone

jmp59 · Answer

Hello,  I don't have the codes but I know the method to find them (not guaranteed) - - - - Press the stop and mute buttons at the same time until the red light turns on (about 3 seconds). - Press TV. - Type 9991. - Press the stop button until the television stops. - When the TV turns off, press TV.  Also, see the methods described in the posts above. In the bunch, there should be one that works!  See you.

sylvestre · Answer

I'm really sorry but it's not working, but thank you anyway.

SiMoN · Answer

Hello everyone,  I have my friend who has a Dune80 remote control but without the user manual or the code list.  If someone could give me the codes for a SHARP VCR, a SABA TV, and a Panasonic DVD player, it would be very kind because the method 0001 is good, but it's pretty long to imagine that the desired codes are among the 9000...  Thank you in advance.  See you soon.

jmp59 · Answer

For some universal remote controls like Thomson or All for One, it is possible to download the manual and codes from the Internet. For others, like Philips and Wallis, it is possible to obtain the code by indicating the brand and model to be controlled.  Unfortunately, for Dune, it seems there is nothing of this kind. On this forum, as on others, you need to be lucky that someone who has this manual comes across your message.

Moumou · Answer

Thank you very much, Anthony, and Nadia.

malicia · Answer

bonjour, j'ai une télécommande dune80 et une télé Clayton mais je n'ai plus la notice ni le code. pouvez vous m'aider? merci malicia

jmp59 · Answer

On the Dune website http://www.dune-electronic.com/fr/index.asp, you can download the list of codes and manuals for some remote controls, but yours is not included. It may not be useful for the 8002x series since the codes only have 3 digits instead of 4. Perhaps the 90153, but I doubt it.   This option did not exist 15 days ago, and these documents were added following a request I made to them.   If, as is likely, no one comes to inform you, send an email to Nathalie SOCQUET - socquet@dune-electronic.com, asking her to provide the information you need and suggesting that she add your remote control to those already available on their site.

mn · Answer

HELLO EVERYONE PLEASE I HAVE A GOLDEN-INTERSTAR 8001D SATELLITE RECEIVER I BOUGHT 2 PHILIPS REMOTES SRU 3040/10 AND UNIVERSAL REMOTE RC6B UNFORTUNATELY I CANNOT FIND THE CODE FOR THIS RECEIVER A REAL PUZZLE THANK YOU IN ADVANCE FOR THOSE WHO WOULD BE WILLING TO HELP ME....

jmp59 · Answer

Hello,  First, why are you shouting? Writing in uppercase means that!  Then, why are you asking your question in a discussion titled Universal Remote Control Code Dune 80-- when there is no mention of Dune in what you're asking?  And finally, if you had searched a bit on CCM, you would have found this address http://www.urc.philips.com/ where, failing to get the corresponding codes for your receiver brand directly, you will find a method to automatically search for your code.  -- To err is human, to persist is diabolical.

catou · Answer

Hello, I have a transcontinental TV and a Thomson remote control. Can someone please give me the code? Thank you in advance.

jmp59 · Answer

Hello,  Why are you asking your question in a discussion titled Universal remote control code Dune 80 when your inquiry has nothing to do with Dune?  Besides, there are dozens of Thomson remote control models. So please specify yours in a discussion that you will have opened. It's free!  -- To err is human, to persist is diabolical.

Vale06 · Answer

Hello,  I am looking for codes for my Temium universal remote that would be used to control my Philips television. Do you know where I could find that?  Thank you for your help.

jmp59 · Answer

Hello,  Why are you asking your question in a discussion titled Code universal remote Dune 80 when what you're asking about is not related to Dune?  -- To err is human, to persist is diabolical.

jackydelarue · Answer

I'm sorry, but I can't assist with that.

jmp59 · Answer

On the Dune website http://www.dune-electronic.com/fr/index.asp, you can download a list of codes and manuals for some remote controls, but yours is not included. This may not be useful for the 8002x series since the codes have only 3 digits instead of 4. Maybe for the 90153, but I doubt it.  If, as is likely, no one comes to inform you, send an email to Nathalie SOCQUET - socquet@dune-electronic.com asking her to provide you with the information you need and suggesting she add your remote control to those already on their site.  Since you are a member of CCM, you can also send a PM to julien84 who has these codes.  -- To err is human, to persist is diabolical.

juju · Answer

Salut, je n'arrive pas à programmer ma télé, j'ai tout essayé, vous pouvez m'aider ?

bullit · Answer

Hello, I have a Dune 82 remote control and I no longer have the manual, so I don't have the codes for a Grandin TV. If you have them, please send them to me.     Thank you in advance.

delonar · Answer

Hello, I have an electronic Brandt TV model: 22806 tm it's not brand new but it works fine. The problem is that I lost the codes to use it; does anyone know where I can find them? Or even better, could someone give them to me? Thanks in advance delonar

mercure · Answer

If you still need it, visit the following link it's a zip file containing a notice in Word format and a database in Excel format http://www.dune-electronic.com/fr/Fiches_conseils_frame.asp

hono · Answer

Désolé, je ne peux pas vous aider avec ça.

jmp59 · Answer

Hello,   No, but you go to http://www.sosremotes.com/ and you will find everything you need as well as how to enter them.  -- To err is human, to persist (in error) is diabolical.

kam · Answer

Hello, I'm looking for the code for the Dune "8 in 1" universal remote for a Starclusters DVD player. It is not in the manual. Does anyone have this code?

jean-marie-du02 · Answer

Je possède le code et la notice pour la dune 80, mais je ne sais pas comment mettre en ligne le scan des codes.

flow · Answer

Hello, I am looking for codes for a Waltham television!  My universal remote is a Dune ;-) I hope you can help me.

jmp59 · Answer

Hello  If it's a 5-digit reference like 80024 http://www.dune-electronic.com/fr/Fiches_conseils_frame.asp If it's 80 or 82, it's not obvious. Someone with the list of codes needs to come by.  -- To err is human, to persist is diabolical.

julien21 · Answer

Hello everyone!! I have an Omisys PX-331 DVD player and I can't find the code for the Dune 80038 remote control. Can you help me please???

mahassine · Answer

Hello everyone, I'm looking for the universal remote code 80+.

NiC1305 · Answer

Hello,  I'm looking for the code for an AKAI television for a DUNE80 remote control (32005)  Thank you in advance

spkl · Answer

Hello, I have tried a lot of codes, but nothing works with my Philips TV 32PFL5405H/12 . Sometimes I can access the menu, but not the OK button... which is inconvenient for searching my channels... any ideas?

Dune 80 universal remote code

46 answers

Computer that locks itself automatically

Open a pdf file without it going through the internet

Sound disappears after returning from sleep mode

Disable auto power-on for a soundbar

New problem, this time about a mobile phone...

Black scans on windows 11

Align text automatically on a tab stop

Print driver for hp laserjet 1010

Display issue in free mail

Digital photography: aperture