46 answers
- 1
- 2
- 3
Next
Here is the answer that was given to me and it works on kaisui
http://www.commentcamarche.net/forum/affich-465741-Code-IR-pour-t%E9l%E9commande-universelle-Dune-8
http://www.commentcamarche.net/forum/affich-465741-Code-IR-pour-t%E9l%E9commande-universelle-Dune-8
Hi, for the Kaisui TV there are 3 codes, so try them and you'll see: 0591, 1321, and 1331.
If that doesn't work, you can always try the magic code which is 0001! In that case, as soon as you enter it, point your remote at your TV (logical lol) and press the power button the necessary number of times for the device to turn off! As soon as it turns off, quickly press P+ and V- to confirm the code and turn off the indicator!
There you go, keep us updated if it worked!
Bye
If that doesn't work, you can always try the magic code which is 0001! In that case, as soon as you enter it, point your remote at your TV (logical lol) and press the power button the necessary number of times for the device to turn off! As soon as it turns off, quickly press P+ and V- to confirm the code and turn off the indicator!
There you go, keep us updated if it worked!
Bye
Hello everyone,
I'm a bit desperate because I have a great universal remote Dune 80050 but I no longer have the manual, and whenever I start searching by pressing the power button, I end up getting cramps!!!
Anyway, I have a Thomson TV, does anyone have any codes to help me?
Thanks to my future savior ;-)
I'm a bit desperate because I have a great universal remote Dune 80050 but I no longer have the manual, and whenever I start searching by pressing the power button, I end up getting cramps!!!
Anyway, I have a Thomson TV, does anyone have any codes to help me?
Thanks to my future savior ;-)
Hello, no need for code, you can do an automatic search, which means:
press SET and TV at the same time = the light turns on, while the light is on, press SET again until the light blinks, then press power until the light blinks (more slowly) then place the remote in front of the TV...
after a while, the TV turns off and then back on, quickly take the remote and press TV
there you go, bye bye.
press SET and TV at the same time = the light turns on, while the light is on, press SET again until the light blinks, then press power until the light blinks (more slowly) then place the remote in front of the TV...
after a while, the TV turns off and then back on, quickly take the remote and press TV
there you go, bye bye.
For some universal remote controls like Thomson or All for One, it is possible to download the manual and codes from the Internet.
For others, like Philips and Wallis, it is possible to obtain the code by indicating the brand and model to be controlled.
Unfortunately, for Dune, it seems there is nothing of this kind.
On this forum, as on others, you need to be lucky that someone who has this manual comes across your message.
For others, like Philips and Wallis, it is possible to obtain the code by indicating the brand and model to be controlled.
Unfortunately, for Dune, it seems there is nothing of this kind.
On this forum, as on others, you need to be lucky that someone who has this manual comes across your message.
How old is your TV?
Is it an antique?
I suppose it's Japanese, well, from Asia.
Small brands like yours are often sub-brands of large brands like SONY, HITACHI, the components you find inside are the same, except they're not their best components. However, for the code, manufacturers usually keep the same remote control code for many years, so try programming your remote with a SONY, PANASONIC, or JVC, HITACHI code; I know, for example, that the codes for PHILIPS and SCHNEIDER remotes are the same!!!!
GOOD LUCK!!!!!!
Is it an antique?
I suppose it's Japanese, well, from Asia.
Small brands like yours are often sub-brands of large brands like SONY, HITACHI, the components you find inside are the same, except they're not their best components. However, for the code, manufacturers usually keep the same remote control code for many years, so try programming your remote with a SONY, PANASONIC, or JVC, HITACHI code; I know, for example, that the codes for PHILIPS and SCHNEIDER remotes are the same!!!!
GOOD LUCK!!!!!!
I also have the same problem with the same remote control (dune80) and the same television (kaisui)!
Do you have a solution for me? Thank you in advance...
Do you have a solution for me? Thank you in advance...
Hello everyone!!!
I am really delighted to have called on you, I found the right code for my remote control thanks to you and I thank you again for your attention!!!
See you soon
I am really delighted to have called on you, I found the right code for my remote control thanks to you and I thank you again for your attention!!!
See you soon
Heuuu it's nice but there is no "SET" button on the dune 80050 !!
so what should I do? !! ;-)))
thanks
so what should I do? !! ;-)))
thanks
Hello, in this case, you need to press TV, then P+ and V- (for 2 seconds) until the indicator light turns on.
Enter the code 0001, and press Power/Standby, but do it slowly, and as soon as your TV turns off, you need to immediately press P+ and V- to confirm, and normally the indicator light turns off and the code is saved.
There you go, I hope I was able to help you.
Enter the code 0001, and press Power/Standby, but do it slowly, and as soon as your TV turns off, you need to immediately press P+ and V- to confirm, and normally the indicator light turns off and the code is saved.
There you go, I hope I was able to help you.
Thank you Nadia, that's very kind.
I tried all the codes, unfortunately nothing works.
I think I'm going to have to give up, it doesn't work with this TV pfff
I have an idea!! I'm going to buy another TV lol!!!
Thanks again.
I tried all the codes, unfortunately nothing works.
I think I'm going to have to give up, it doesn't work with this TV pfff
I have an idea!! I'm going to buy another TV lol!!!
Thanks again.
You're welcome
Even with the auto search it didn't work
Too bad
Yes, or another universal remote, it will be cheaper lol
Well, good luck
Even with the auto search it didn't work
Too bad
Yes, or another universal remote, it will be cheaper lol
Well, good luck
Hi Nadia,
yes I tried the magic code and it doesn't work...
if anyone has a solution...
thanks anyway
have a nice day
pouty
yes I tried the magic code and it doesn't work...
if anyone has a solution...
thanks anyway
have a nice day
pouty
Hello
I have a Goldstar TV and a Dune 80 remote control, but I lost the manual with the codes.
Could someone provide me with the codes for the Goldstar brand or send me the list via email?
Thank you in advance for your response
See you soon
I have a Goldstar TV and a Dune 80 remote control, but I lost the manual with the codes.
Could someone provide me with the codes for the Goldstar brand or send me the list via email?
Thank you in advance for your response
See you soon
Hello everyone, I would like to know if you can give me the code for a Philips TV
thank you also to all the other codes you have given us (for my brother)
have a good vacation everyone
thank you also to all the other codes you have given us (for my brother)
have a good vacation everyone
Hello,
I don't have the codes but I know the method to find them (not guaranteed) - - - - Press the stop and mute buttons at the same time until the red light turns on (about 3 seconds).
- Press TV.
- Type 9991.
- Press the stop button until the television stops.
- When the TV turns off, press TV.
Also, see the methods described in the posts above. In the bunch, there should be one that works!
See you.
I don't have the codes but I know the method to find them (not guaranteed) - - - - Press the stop and mute buttons at the same time until the red light turns on (about 3 seconds).
- Press TV.
- Type 9991.
- Press the stop button until the television stops.
- When the TV turns off, press TV.
Also, see the methods described in the posts above. In the bunch, there should be one that works!
See you.
- 1
- 2
- 3
Next
Thank you in advance.
If that doesn't work, you can always try the magic code which is 0001! In that case, as soon as you enter it, point your remote at your TV (logical, lol) and press the power button the number of times necessary for the device to turn off! As soon as it turns off, immediately press P+ and V- to confirm the code and turn off the indicator!
There you go, let us know if it worked!
Bye
Sorry, this is where I was supposed to place my message!
- of knowing what remote you have.
- of having the manual for that remote.
- of knowing the model of your TV.
You're not getting out of it? For us, it's not even worth trying.. There are too many possibilities, maybe even impossibilities.