Probleme de son
Résolu
guiky
Messages postés
62
Statut
Membre
-
gouby Messages postés 48235 Date d'inscription Statut Contributeur Dernière intervention -
gouby Messages postés 48235 Date d'inscription Statut Contributeur Dernière intervention -
Bonjour,
malgrès toutes les manip que je vois que vous avez déjà conseillées, rien ne fonctionne, sachant que mon periferique audio windows est acivé en automatique, je ne peux toujours pas démarer de musique.ni de film d'ailleur.
voilà ce que m'indique quand je lance vlc ou media player :
Le Lecteur Windows Media ne peut pas lire le fichier parce que le périphérique audio pose problème. Votre ordinateur ne comporte peut-être pas de périphérique audio, ce périphérique est utilisé par un autre programme ou il ne fonctionne pas correctement.
QUE FAIRE???
malgrès toutes les manip que je vois que vous avez déjà conseillées, rien ne fonctionne, sachant que mon periferique audio windows est acivé en automatique, je ne peux toujours pas démarer de musique.ni de film d'ailleur.
voilà ce que m'indique quand je lance vlc ou media player :
Le Lecteur Windows Media ne peut pas lire le fichier parce que le périphérique audio pose problème. Votre ordinateur ne comporte peut-être pas de périphérique audio, ce périphérique est utilisé par un autre programme ou il ne fonctionne pas correctement.
QUE FAIRE???
25 réponses
re
c est quoi la marque et le modele du pc ??
ps, par contre c etait pas la peine de rouvrir un post, on aurait pu continuer sur l autre
suite de celui la
http://www.commentcamarche.net/forum/affich 6977488 peripheriques audio
c est quoi la marque et le modele du pc ??
ps, par contre c etait pas la peine de rouvrir un post, on aurait pu continuer sur l autre
suite de celui la
http://www.commentcamarche.net/forum/affich 6977488 peripheriques audio
ok, tu devrais pouvoir trouver ton pilote son sur leur site
https://www.fujitsu-siemens.fr
il leur faut le numero d identifications
https://www.fujitsu-siemens.fr
aprs tu te laisse guider, et normalment tu pourra recuperer le pilote de ta carte son que tu telechargera et installera
https://www.fujitsu-siemens.fr
il leur faut le numero d identifications
https://www.fujitsu-siemens.fr
aprs tu te laisse guider, et normalment tu pourra recuperer le pilote de ta carte son que tu telechargera et installera
c est le numero qu il y a collé sur la tour, tu as un descriptif sur leur page
Le numéro d´identification (ID) ou le numéro de série se trouve sur l´étiquette d´identification du système collée sur l´unité, comme l´illustrent les diagrammes suivants. L´étiquette est généralement placée à l´arrière de l´unité, ou au bas de celle-ci dans le cas d´ordinateurs portables.:
Le numéro d´identification (ID) ou le numéro de série se trouve sur l´étiquette d´identification du système collée sur l´unité, comme l´illustrent les diagrammes suivants. L´étiquette est généralement placée à l´arrière de l´unité, ou au bas de celle-ci dans le cas d´ordinateurs portables.
Le numéro d´identification (ID) ou le numéro de série se trouve sur l´étiquette d´identification du système collée sur l´unité, comme l´illustrent les diagrammes suivants. L´étiquette est généralement placée à l´arrière de l´unité, ou au bas de celle-ci dans le cas d´ordinateurs portables.:
Le numéro d´identification (ID) ou le numéro de série se trouve sur l´étiquette d´identification du système collée sur l´unité, comme l´illustrent les diagrammes suivants. L´étiquette est généralement placée à l´arrière de l´unité, ou au bas de celle-ci dans le cas d´ordinateurs portables.
auparavant, peut tu quand meme me dire, si tu as un point jaune dans le gestionnaire de peripherique ? car tu ne me l a pas signaler
You have selected the following product
Produit: SCALEO P /P4 517 2,93 HT 1M 775/
Numéro de série (SNR): YSSP930505
Save this product for future searching
Sélectionnez un nouveau produit
Paramètres de recherche pour SCALEO P /P4 517 2,93 HT 1M 775/
Afficher les questions fréquentes en: Allemand Anglais Afficher les entrées depuis: 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 older
Please tell us your question:
Sound Envoyer une demande
Aucun résultat
Veuillez modifier votre demande de recherche.
que faire de plus?
ca ne fonctionne pas!
Produit: SCALEO P /P4 517 2,93 HT 1M 775/
Numéro de série (SNR): YSSP930505
Save this product for future searching
Sélectionnez un nouveau produit
Paramètres de recherche pour SCALEO P /P4 517 2,93 HT 1M 775/
Afficher les questions fréquentes en: Allemand Anglais Afficher les entrées depuis: 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 older
Please tell us your question:
Sound Envoyer une demande
Aucun résultat
Veuillez modifier votre demande de recherche.
que faire de plus?
ca ne fonctionne pas!
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
je viens d essayer avec le numero et ca marche chez moi, tu as juste a rentrer le numero YSSP930505 ensuite tu choisi ton systeme d exploitation, et tu as acces a tes driver
une fois dans l acces des drivers, tu prend le driver de chipset : Chipset i915+ICH6 le plus recent
et l audio :le plus recent aussi
une fois dans l acces des drivers, tu prend le driver de chipset : Chipset i915+ICH6 le plus recent
et l audio :le plus recent aussi
a l interieur, tu dois trouver un set up, execute le
tres important commence par celui de chipset et ensuite l audio et non l inverse
tres important commence par celui de chipset et ensuite l audio et non l inverse
j ai telecharger le fichier chipset = alors une fois le dossier extrait, tu vas dedans, ensuite dans _regfix = tu lance l application rsdrive
pour l audio, une fois le dossier extrait , tu ouvre = rtlupd
pour l audio, une fois le dossier extrait , tu ouvre = rtlupd
tient , c est etrange
on va proceder autrement, installe et post un rapport Everest
on va proceder autrement, installe et post un rapport Everest
EVEREST Home Edition © 2003-2005 Lavalys, Inc.
--------------------------------------------------------------------------------
Version EVEREST v2.20.405/fr
Site web http://www.lavalys.com/
Type de rapport Générateur de rapports
Ordinateur LASCAUX-5X12KLM
Générateur perrine lascaux
Système d'exploitation Microsoft Windows XP Home Edition 5.1.2600 (WinXP Retail)
Date 2008-06-20
Heure 11:47
Résumé
--------------------------------------------------------------------------------
Ordinateur:
Système d'exploitation Microsoft Windows XP Home Edition
Service Pack du système Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Nom du système LASCAUX-5X12KLM
Nom de l'utilisateur perrine lascaux
Carte mère:
Type de processeur Intel Pentium 4 516, 2933 MHz (22 x 133)
Nom de la carte mère Asus P5GD1-FM (FSC OEM) (3 PCI, 1 PCI-E x16, 4 DDR DIMM, Audio, LAN, IEEE-1394)
Chipset de la carte mère Intel Grantsdale i915P
Mémoire système 1536 Mo (PC3200 DDR SDRAM)
Type de BIOS AMI (11/28/05)
Port de communication Port de communication (COM1)
Moniteur:
Carte vidéo ATI Radeon X600 (RV380)
Accélérateur 3D ATI Radeon X600 (RV380)
Multimédia:
Carte audio Intel 82801FB ICH6 - High Definition Audio Controller [B-1]
Stockage:
Contrôleur IDE Contrôleur IDE standard double canal PCI
Contrôleur IDE Contrôleur IDE standard double canal PCI
Disque dur ST3200827A (186 Go, IDE)
Disque dur Generic 2.0 Reader -SM USB Device
Disque dur Generic 2.0 Reader -CF USB Device
Disque dur Generic 2.0 Reader -SD USB Device
Disque dur Generic 2.0 Reader -MS USB Device
Disque dur Generic 2.0 Reader -xD USB Device
Lecteur optique _NEC DVD_RW ND-4550A (DVD+R9:8x, DVD-R9:6x, DVD+RW:16x/8x, DVD-RW:16x/8x, DVD-RAM:5x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)
État des disques durs SMART OK
Partitions:
C: (NTFS) 190779 Mo (179026 Mo libre)
Entrée:
Clavier Périphérique clavier PIH
Souris Logitech USB First/Pilot Mouse+
Réseau:
Carte réseau Carte réseau Fast Ethernet PCI Realtek RTL8139 Family (192.168.1.20)
Périphériques:
Contrôleur USB1 Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Contrôleur USB1 Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Contrôleur USB1 Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Contrôleur USB1 Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Contrôleur USB2 Intel 82801FB ICH6 - Enhanced USB2 Controller [B-1]
Périphérique USB Logitech USB First/Pilot Mouse+
Périphérique USB Périphérique de stockage de masse USB
Périphérique USB Périphérique d'interface utilisateur USB
Périphérique USB Périphérique d'interface utilisateur USB
Périphérique USB Périphérique USB composite
DMI
--------------------------------------------------------------------------------
[ BIOS ]
Propriétés du BIOS:
Vendeur American Megatrends Inc.
Version 1012.003
Date de sortie 11/28/2005
Taille 512 Ko
Périphériques de démarrage Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
Fonctions disponibles Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
Standards respectés DMI, APM, ACPI, ESCD, PnP
Possibilités d'expansion ISA, PCI, AGP, USB
[ Système ]
Propriétés système:
Fabricant FUJITSU SIEMENS
Produit P5GD1-FM
Version System Version
Numéro de série System Serial Number
Identifiant unique universel 50F164A4-75FED511-9E67412F-75866CEF
Type de démarrage PCI PME#
[ Carte mère ]
Propriétés de la carte mère:
Fabricant Fujitsu Siemens
Produit P5GD1-FM
Version Rev 1.xx
Numéro de série MB-1234567890
[ Châssis ]
Propriétés du châssis:
Fabricant Chassis Manufacture
Version Chassis Version
Numéro de série Chassis Serial Number
Étiquette Asset-1234567890
Type du châssis Boîtier standard
Verrou du châssis Présent
État au démarrage En sûreté
État de l'alimentation En sûreté
Conditions de température En sûreté
Conditions de sécurité Aucun(e)
[ Contrôleur mémoire ]
Propriétés du contrôleur mémoire:
Méthode de détection d'erreurs Aucun(e)
Correction d'erreurs Aucun(e)
Interleave mémoire géré 1-Way
Interleave mémoire courant 1-Way
Vitesses de mémoire gérées 70ns, 60ns, 50ns
Types de mémoire gérés SIMM, DIMM, SDRAM
Voltages de mémoire gérés 3.3V
Taille maximale des modules mémoire 1024 Mo
Slots mémoire 4
[ Processeurs / Intel(R) Pentium(R) 4 CPU 2.93GHz ]
Propriétés du processeur:
Fabricant Intel
Version Intel(R) Pentium(R) 4 CPU 2.93GHz
Numéro de série To Be Filled By O.E.M.
Étiquette To Be Filled By O.E.M.
Numéro du type de composant To Be Filled By O.E.M.
Horloge externe 133 MHz
Vitesse d'horloge maximale 4000 MHz
Vitesse d'horloge courante 2933 MHz
Type Central Processor
Voltage 1.4 V
État Activé
Identifiant du socket Socket 775
[ Caches / L1-Cache ]
Propriétés du cache:
Type Interne
État Activé
Mode d'opération Varies with Memory Address
Taille maximale 16 Ko
Taille installée 16 Ko
Type de SRAM géré Pipeline Burst
Type de SRAM courant Pipeline Burst
Correction d'erreurs Single-bit ECC
Identifiant du socket L1-Cache
[ Caches / L2-Cache ]
Propriétés du cache:
Type Interne
État Activé
Mode d'opération Varies with Memory Address
Taille maximale 1024 Ko
Taille installée 1024 Ko
Type de SRAM géré Pipeline Burst
Type de SRAM courant Pipeline Burst
Correction d'erreurs Single-bit ECC
Identifiant du socket L2-Cache
[ Caches / L3-Cache ]
Propriétés du cache:
Type Interne
État Désactivé(e)
Taille maximale 0 Ko
Taille installée 0 Ko
Identifiant du socket L3-Cache
[ Modules mémoire / DIMM0 ]
Propriétés du module mémoire:
Identifiant du socket DIMM0
Type DIMM, SDRAM
Vitesse 50 ns
Taille installée 1024 Mo
Taille activée 1024 Mo
[ Modules mémoire / DIMM1 ]
Propriétés du module mémoire:
Identifiant du socket DIMM1
Type DIMM, SDRAM
Vitesse 50 ns
Taille installée 512 Mo
Taille activée 512 Mo
[ Modules mémoire / DIMM2 ]
Propriétés du module mémoire:
Identifiant du socket DIMM2
Type DIMM, SDRAM
Taille installée Non installé
Taille activée Non installé
[ Modules mémoire / DIMM3 ]
Propriétés du module mémoire:
Identifiant du socket DIMM3
Type DIMM, SDRAM
Taille installée Non installé
Taille activée Non installé
[ Périphériques mémoire / DIMM0 ]
Propriétés du périphérique mémoire:
Forme DIMM
Type SDRAM
Type détaillé Synchronous
Taille 1024 Mo
Vitesse 400 MHz
Taille totale 64 bits
Largeur de données 64 bits
Emplacement du périphérique DIMM0
Numéro de la banque BANK0
Fabricant Manufacturer0
Numéro de série SerNum0
Étiquette AssetTagNum0
Numéro du type de composant PartNum0
[ Périphériques mémoire / DIMM1 ]
Propriétés du périphérique mémoire:
Forme DIMM
Type SDRAM
Type détaillé Synchronous
Taille 512 Mo
Vitesse 400 MHz
Taille totale 64 bits
Largeur de données 64 bits
Emplacement du périphérique DIMM1
Numéro de la banque BANK1
Fabricant Manufacturer1
Numéro de série SerNum1
Étiquette AssetTagNum1
Numéro du type de composant PartNum1
[ Périphériques mémoire / DIMM2 ]
Propriétés du périphérique mémoire:
Forme DIMM
Emplacement du périphérique DIMM2
Numéro de la banque BANK2
Fabricant Manufacturer2
Numéro de série SerNum2
Étiquette AssetTagNum2
Numéro du type de composant PartNum2
[ Périphériques mémoire / DIMM3 ]
Propriétés du périphérique mémoire:
Forme DIMM
Emplacement du périphérique DIMM3
Numéro de la banque BANK3
Fabricant Manufacturer3
Numéro de série SerNum3
Étiquette AssetTagNum3
Numéro du type de composant PartNum3
[ Slots système / PCIEX_16 ]
Propriétés du slot système:
Identifiant du slot PCIEX_16
Usage Utilisé
Largeur du bus de données 32 bits
Longueur Court
[ Slots système / PCI_1 ]
Propriétés du slot système:
Identifiant du slot PCI_1
Type PCI
Usage Vide
Largeur du bus de données 32 bits
Longueur Court
[ Slots système / PCI_2 ]
Propriétés du slot système:
Identifiant du slot PCI_2
Type PCI
Usage Vide
Largeur du bus de données 32 bits
Longueur Court
[ Slots système / PCI_3 ]
Propriétés du slot système:
Identifiant du slot PCI_3
Type PCI
Usage Vide
Largeur du bus de données 32 bits
Longueur Court
[ Connecteurs de ports / USB1 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB1
Type du connecteur externe USB
[ Connecteurs de ports / USB2 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB2
Type du connecteur externe USB
[ Connecteurs de ports / USB3 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB3
Type du connecteur externe USB
[ Connecteurs de ports / USB4 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB4
Type du connecteur externe USB
[ Connecteurs de ports / USB5 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB5
Type du connecteur externe USB
[ Connecteurs de ports / USB6 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB6
Type du connecteur externe USB
[ Connecteurs de ports / USB7 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB7
Type du connecteur externe USB
[ Connecteurs de ports / USB8 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB8
Type du connecteur externe USB
[ Connecteurs de ports / COM 1 ]
Propriétés du connecteur de port:
Type de port Serial Port 16550A Compatible
Type du connecteur interne Aucun(e)
Désignation du connecteur externe COM 1
Type du connecteur externe DB-9 pin male
[ Connecteurs de ports / Audio Mic In ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Mic In
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line In ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line In
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line Out1 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line Out1
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line Out2 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line Out2
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line Out3 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line Out3
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line Out4 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line Out4
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / SPDIF_OUT1 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe SPDIF_OUT1
Type du connecteur externe On-Board Sound Input from CD-ROM
[ Connecteurs de ports / LAN ]
Propriétés du connecteur de port:
Type de port Network Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe LAN
Type du connecteur externe RJ-45
[ Connecteurs de ports / FireWire 1 ]
Propriétés du connecteur de port:
Type de port FireWire (IEEE P1394)
Type du connecteur interne Aucun(e)
Désignation du connecteur externe FireWire 1
Type du connecteur externe 1394
[ Connecteurs de ports / FireWire 2 ]
Propriétés du connecteur de port:
Type de port FireWire (IEEE P1394)
Type du connecteur interne Aucun(e)
Désignation du connecteur externe FireWire 2
Type du connecteur externe 1394
[ Connecteurs de ports / SB_IDE ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_IDE
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / SB_SATA1 ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_SATA1
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / SB_SATA2 ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_SATA2
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / SB_SATA3 ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_SATA3
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / SB_SATA4 ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_SATA4
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / CD ]
Propriétés du connecteur de port:
Type de port Audio Port
Désignation du connecteur interne CD
Type du connecteur interne On-Board Sound Input from CD-ROM
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / FP_AUDIO ]
Propriétés du connecteur de port:
Type de port Audio Port
Désignation du connecteur interne FP_AUDIO
Type du connecteur interne On-Board Sound Input from CD-ROM
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / FLOPPY ]
Propriétés du connecteur de port:
Désignation du connecteur interne FLOPPY
Type du connecteur interne On-Board Floppy
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / CHA_FAN ]
Propriétés du connecteur de port:
Désignation du connecteur interne CHA_FAN
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / CPU_FAN ]
Propriétés du connecteur de port:
Désignation du connecteur interne CPU_FAN
Type du connecteur externe Aucun(e)
[ Périphériques intégrés / Onboard Audio ]
Propriétés du périphérique intégré:
Description Onboard Audio
Overclock
--------------------------------------------------------------------------------
Propriétés du processeur:
Type de processeur Intel Pentium 4 516
Alias du processeur Prescott
Stepping du processeur G1
Engineering Sample Non
(CPUID) Nom du processeur Intel(R) Pentium(R) 4 CPU 2.93GHz
(CPUID) Révision 00000F49h
Vitesse du CPU:
Vitesse d'horloge du processeur 2927.85 MHz (original: 2933 MHz)
Multiplicateur du CPU 22.0x
FSB du CPU 133.08 MHz (original: 133 MHz)
Bus mémoire 199.63 MHz
Cache du CPU:
Cache de trace de niveau 1 12K Instructions
Cache de données de niveau 1 16 Ko
Cache de niveau 2 1 Mo (On-Die, ECC, ATC, Full-Speed)
Propriétés de la carte mère:
Identifiant de la carte mère 63-1203-000010-00101111-112805-I915$A0164001_BIOS DATE: 11/28/05 10:37:03 VER: 08.00.10
Nom de la carte mère Asus P5GD1-FM (FSC OEM) (3 PCI, 1 PCI-E x16, 4 DDR DIMM, Audio, LAN, IEEE-1394)
Propriétés du chipset:
Chipset de la carte mère Intel Grantsdale i915P
Performances mémoire 3-4-4-8 (CL-RCD-RP-RAS)
Modules de mémoire SPD:
DIMM1 1 Go PC3200 DDR SDRAM (3.0-4-4-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-3-3-6 @ 133 MHz)
DIMM2: Infineon 64D64300HU5C 512 Mo PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
Propriétés du BIOS:
Date du BIOS système 11/28/05
Date du BIOS vidéo 05/11/23
Version du BIOS 1012.003
Propriétés du processeur graphique:
Carte vidéo ATI Radeon X600 (RV380)
Nom de code RV380 (PCI Express x16 1002 / 3E50, Rev 00)
Vitesse d'horloge 371 MHz (original: 375 MHz)
Horloge mémoire 202 MHz (original: 202 MHz)
Économie d'énergie
--------------------------------------------------------------------------------
Gestion de l'économie d'énergie:
Source de courant actuelle Courant de secteur alternatif
État de la batterie Aucune batterie
Temps d'utilisation de la batterie pleine Inconnu
Temps d'utilisation restant Inconnu
Sonde
--------------------------------------------------------------------------------
Propriétés de la sonde:
Type de la sonde Winbond W83627EHF (ISA 290h)
Nom de la carte mère Asus P4GD / P4GPL / P5AD / P5GD / P5P800 Series
Températures:
Carte mère 29 °C (84 °F)
Processeur 42 °C (108 °F)
Seagate ST3200827A 32 °C (90 °F)
Ventilateurs:
Processeur 1448 RPM
Châssis 2328 RPM
Valeurs de voltage:
Noyau CPU 1.56 V
+3.3 V 3.23 V
+5 V 5.51 V
+12 V 12.04 V
Mise en veille +5 V 4.95 V
Debug Info F 91 E9 FF
Debug Info T 29 42 37
Debug Info V B0 EA CD CA FF C6 00 (03)
Processeur
--------------------------------------------------------------------------------
Propriétés du processeur:
Type de processeur Intel Pentium 4 516, 2933 MHz (22 x 133)
Alias du processeur Prescott
Stepping du processeur G1
Jeu d'instructions x86, x86-64, MMX, SSE, SSE2, SSE3
Vitesse d'horloge originelle 2933 MHz
Min / Max du multiplicateur du CPU 14x / 22x
Engineering Sample Non
Cache de trace de niveau 1 12K Instructions
Cache de données de niveau 1 16 Ko
Cache de niveau 2 1 Mo (On-Die, ECC, ATC, Full-Speed)
Multi CPU:
Identifiant de la carte mère INTEL
CPU #0 Intel(R) Pentium(R) 4 CPU 2.93GHz, 2926 MHz
CPU #1 Intel(R) Pentium(R) 4 CPU 2.93GHz, 2926 MHz
Fabricant du processeur:
Nom de l'entreprise Intel Corporation
Information sur le produit https://www.intel.com/content/www/us/en/products/processors.html
Utilisation du processeur:
CPU #1 / HTT Unité #1 0 %
CPU #1 / HTT Unité #2 100 %
CPUID
--------------------------------------------------------------------------------
(CPUID) Propriétés:
(CPUID) Fabricant GenuineIntel
(CPUID) Nom du processeur Intel(R) Pentium(R) 4 CPU 2.93GHz
(CPUID) Révision 00000F49h
(IA) Identifiant de la marque 00h (Inconnu)
Identifiant de la plate-forme 13h (Socket 775)
(IA) Numéro de série du processeur Inconnu
Révision du Microcode Update 3
Unités HTT / CMP 2 / 1
Jeu d'instructions:
Extensions 64 bits x86 (AMD64, EM64T) Géré
Alternate Instruction Set Non géré
AMD 3DNow! Non géré
AMD 3DNow! Professional Non géré
AMD Enhanced 3DNow! Non géré
AMD Extended MMX Non géré
Cyrix Extended MMX Non géré
IA-64 Non géré
IA MMX Géré
IA SSE Géré
IA SSE 2 Géré
IA SSE 3 Géré
Instruction CLFLUSH Géré
Instruction CMPXCHG8B Géré
Instruction CMPXCHG16B Géré
Instruction Conditional Move Géré
Instruction MONITOR / MWAIT Géré
Instruction RDTSCP Non géré
Instruction SYSCALL / SYSRET Non géré
Instruction SYSENTER / SYSEXIT Géré
Instruction VIA FEMMS Non géré
Dispositifs de sécurité:
Advanced Cryptography Engine (ACE) Non géré
Prévention de l'exécution des données (DEP, NX, EDB) Non géré
Hardware Random Number Generator (RNG) Non géré
Montgomery Multiplier & Hash Engine Non géré
Processor Serial Number (PSN) Non géré
Dispositifs de l'économie d'énergie:
Automatic Clock Control Géré
Enhanced Halt State (C1E) Non géré
Enhanced SpeedStep Technology (EIST, ESS) Non géré
Frequency ID Control Non géré
LongRun Non géré
LongRun Table Interface Non géré
PowerSaver 1.0 Non géré
PowerSaver 2.0 Non géré
PowerSaver 3.0 Non géré
Processor Duty Cycle Control Géré
Software Thermal Control Non géré
Temperature Sensing Diode Non géré
Thermal Monitor 1 Géré
Thermal Monitor 2 Géré
Thermal Monitoring Non géré
Thermal Trip Non géré
Voltage ID Control Non géré
(CPUID) Fonctionnalités:
36-bit Page Size Extension Géré
Address Region Registers (ARR) Non géré
CPL Qualified Debug Store Géré
Debug Trace Store Géré
Debugging Extension Géré
Fast Save & Restore Géré
Hyper-Threading Technology (HTT) Géré, Activé
L1 Context ID Géré
Local APIC On Chip Géré
Machine Check Architecture (MCA) Géré
Machine Check Exception (MCE) Géré
Memory Configuration Registers (MCR) Non géré
Memory Type Range Registers (MTRR) Géré
Model Specific Registers (MSR) Géré
Page Attribute Table (PAT) Géré
Page Global Extension Géré
Page Size Extension (PSE) Géré
Pending Break Event Géré
Physical Address Extension (PAE) Géré
Secure Virtual Machine Extensions (Pacifica) Non géré
Self-Snoop Géré
Time Stamp Counter (TSC) Géré
Virtual Machine Extensions (Vanderpool) Non géré
Virtual Mode Extension Géré
CPUID Registers (CPU #1):
CPUID 00000000 00000005-756E6547-6C65746E-49656E69
CPUID 00000001 00000F49-00020800-0000651D-BFEBFBFF
CPUID 00000002 605B5001-00000000-00000000-007C7040
CPUID 00000003 00000000-00000000-00000000-00000000
CPUID 00000004 00004121-01C0003F-0000001F-00000000
CPUID 00000005 00000040-00000040-00000000-00000000
CPUID 80000000 80000008-00000000-00000000-00000000
CPUID 80000001 00000000-00000000-00000001-20000000
CPUID 80000002 20202020-20202020-20202020-6E492020
CPUID 80000003 286C6574-50202952-69746E65-52286D75
CPUID 80000004 20342029-20555043-33392E32-007A4847
CPUID 80000005 00000000-00000000-00000000-00000000
CPUID 80000006 00000000-00000000-04006040-00000000
CPUID 80000007 00000000-00000000-00000000-00000000
CPUID 80000008 00003024-00000000-00000000-00000000
CPUID Registers (CPU #2 Virtual):
CPUID 00000000 00000005-756E6547-6C65746E-49656E69
CPUID 00000001 00000F49-01020800-0000651D-BFEBFBFF
CPUID 00000002 605B5001-00000000-00000000-007C7040
CPUID 00000003 00000000-00000000-00000000-00000000
CPUID 00000004 00004121-01C0003F-0000001F-00000000
CPUID 00000005 00000040-00000040-00000000-00000000
CPUID 80000000 80000008-00000000-00000000-00000000
CPUID 80000001 00000000-00000000-00000001-20000000
CPUID 80000002 20202020-20202020-20202020-6E492020
CPUID 80000003 286C6574-50202952-69746E65-52286D75
CPUID 80000004 20342029-20555043-33392E32-007A4847
CPUID 80000005 00000000-00000000-00000000-00000000
CPUID 80000006 00000000-00000000-04006040-00000000
CPUID 80000007 00000000-00000000-00000000-00000000
CPUID 80000008 00003024-00000000-00000000-00000000
MSR Registers:
MSR 00000017 0012-0000-0000-0000
MSR 0000002A 0000-0000-0000-0000
MSR 0000002C 0000-0000-1611-0816
MSR 0000008B 0000-0003-0000-0000
MSR 0000019A 0000-0000-0000-0002
MSR 0000019B 0000-0000-0000-0000
MSR 0000019C 0000-0000-0000-0000
MSR 0000019D 0000-0000-0000-0E2D
MSR 000001A0 0000-0004-2284-2081
Carte mère
--------------------------------------------------------------------------------
Propriétés de la carte mère:
Identifiant de la carte mère 63-1203-000010-00101111-112805-I915$A0164001_BIOS DATE: 11/28/05 10:37:03 VER: 08.00.10
Nom de la carte mère Asus P5GD1-FM (FSC OEM)
Propriétés du bus principal:
Type du bus Intel NetBurst
Largeur du bus 64 bits
Horloge réelle 133 MHz (QDR)
Horloge effective 533 MHz
Bande passante 4266 Mo/s
Propriétés du bus mémoire:
Type du bus DDR SDRAM
Largeur du bus 64 bits
Horloge réelle 200 MHz (DDR)
Horloge effective 400 MHz
Bande passante 3200 Mo/s
Propriétés du bus chipset:
Type du bus Intel Direct Media Interface
Informations physiques sur la carte mère:
Sockets/slots processeur 1 Socket 775
Slots d'expansion 3 PCI, 1 PCI-E x16
Slots RAM 4 DDR DIMM
Périphériques intégrés Audio, LAN, IEEE-1394
Forme Micro ATX
Taille de la carte mère 240 mm x 240 mm
Chipset de la carte mère i915P
Fabricant de la carte mère:
Nom de l'entreprise ASUSTeK Computer Inc.
Information sur le produit http://www.asus.com/products1.aspx?l1=3
Télécharger le BIOS http://support.asus.com/download/download.aspx?SLanguage=en-us
Mémoire
--------------------------------------------------------------------------------
Mémoire physique:
Total 1535 Mo
Utilisé 386 Mo
Disponible 1149 Mo
Utilisation 25 %
Zone de swap:
Total 3434 Mo
Utilisé 236 Mo
Disponible 3198 Mo
Utilisation 7 %
Mémoire virtuelle:
Total 4970 Mo
Utilisé 622 Mo
Disponible 4347 Mo
Utilisation 13 %
Physical Address Extension (PAE):
Supporté par le système d'exploitation Oui
Supporté par le processeur Oui
Active Non
SPD
--------------------------------------------------------------------------------
[ DIMM1: 1 Go PC3200 DDR SDRAM ]
Propriétés du module mémoire:
Numéro de série Aucun(e)
Taille du module 1024 Mo (2 ranks, 4 banks)
Type du module Unbuffered
Type de mémoire DDR SDRAM
Vitesse de mémoire PC3200 (200 MHz)
Largeur du module 64 bit
Voltage du module SSTL 2.5
Méthode de détection d'erreurs Aucun(e)
Taux de rafraîchissement Réduit (7.8 us), Self-Refresh
Performances mémoire:
@ 200 MHz 3.0-4-4-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
Fonctionnalités du module mémoire:
Early RAS# Precharge Non géré
Auto-Precharge Non géré
Precharge All Non géré
Write1/Read Burst Non géré
Buffered Address/Control Inputs Non géré
Registered Address/Control Inputs Non géré
On-Card PLL (Clock) Non géré
Buffered DQMB Inputs Non géré
Registered DQMB Inputs Non géré
Differential Clock Input Géré
Redundant Row Address Non géré
[ DIMM2: Infineon 64D64300HU5C ]
Propriétés du module mémoire:
Nom du module Infineon 64D64300HU5C
Numéro de série 0D06DE15h
Date de fabrication Semaine 16 / 2006
Taille du module 512 Mo (1 rank, 4 banks)
Type du module Unbuffered
Type de mémoire DDR SDRAM
Vitesse de mémoire PC3200 (200 MHz)
Largeur du module 64 bit
Voltage du module SSTL 2.5
Méthode de détection d'erreurs Aucun(e)
Taux de rafraîchissement Réduit (7.8 us), Self-Refresh
Performances mémoire:
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS)
Fonctionnalités du module mémoire:
Early RAS# Precharge Géré
Auto-Precharge Non géré
Precharge All Non géré
Write1/Read Burst Non géré
Buffered Address/Control Inputs Non géré
Registered Address/Control Inputs Non géré
On-Card PLL (Clock) Non géré
Buffered DQMB Inputs Non géré
Registered DQMB Inputs Non géré
Differential Clock Input Géré
Redundant Row Address Non géré
Fabricant du module mémoire:
Nom de l'entreprise Infineon Technologies AG
Information sur le produit https://www.infineon.com/?tabId=1
Chipset
--------------------------------------------------------------------------------
[ North Bridge: Intel Grantsdale i915P ]
Propriétés du chipset North Bridge:
North Bridge Intel Grantsdale i915P
Révision / Stepping 0E / C2
Forme du composant 1210 Pin FC-BGA
Taille du composant 3.75 cm x 3.75 cm
Voltage au coeur 1.5 V
In-Order Queue Depth 12
Contrôleur mémoire:
Type Dual Channel (128 bits)
Mode actif Single Channel (64 bits)
Performances mémoire:
CAS Latency (CL) 3T
RAS To CAS Delay (tRCD) 4T
RAS Precharge (tRP) 4T
RAS Active Time (tRAS) 8T
Correction d'erreurs:
ECC Non géré
ChipKill ECC Non géré
RAID Non géré
ECC Scrubbing Non géré
Slots mémoire:
Slot DRAM nº1 1024 Mo (PC3200 DDR SDRAM)
Slot DRAM nº2 512 Mo (PC3200 DDR SDRAM)
Contrôleur PCI Express:
PCI-E x16 port #2 Utilisé @ x16 (ATI Radeon X600 (RV380) Video Adapter)
Fabricant du chipset:
Nom de l'entreprise Intel Corporation
Information sur le produit https://www.intel.com/content/www/us/en/products/chipsets.html
Télécharger le pilote https://www.intel.com/content/www/us/en/support.html
[ South Bridge: Intel 82801FB ICH6 ]
Propriétés du chipset South Bridge:
South Bridge Intel 82801FB ICH6
Révision / Stepping D3 / B1
Forme du composant 609 Pin mBGA
Taille du composant 3.1 cm x 3.1 cm
Voltage au coeur 1.5 V
High Definition Audio:
Type du contrôleur audio Intel 82801FB(M) ICH6
Nom du codec Realtek ALC880(D)
Identifiant du codec 10EC0880h
Révision du codec 00090500h
Contrôleur PCI Express:
PCI-E x1 port #1 Vide
PCI-E x1 port #2 Vide
PCI-E x1 port #3 Vide
PCI-E x1 port #4 Vide
Fabricant du chipset:
Nom de l'entreprise Intel Corporation
Information sur le produit https://www.intel.com/content/www/us/en/products/chipsets.html
Télécharger le pilote https://www.intel.com/content/www/us/en/support.html
BIOS
--------------------------------------------------------------------------------
Propriétés du BIOS:
Type de BIOS AMI
Date du BIOS système 11/28/05
Date du BIOS vidéo 05/11/23
Fabricant du BIOS:
Nom de l'entreprise American Megatrends Inc.
Information sur le produit https://ami.com/en/products/bios-uefi-firmware/
Mises à jour du BIOS http://www.esupport.com/biosagent/index.cfm?refererid=40
Problèmes et suggestions:
Suggestion Are you looking for a BIOS Upgrade? Contact eSupport Today!
Suggestion Le BIOS système a plus de 2 ans. Mettez-le à jour si nécessaire.
Vidéo PCI/AGP
--------------------------------------------------------------------------------
Description du périphérique Type du périphérique
ATI Radeon X600 (RV380) Carte vidéo
ATI Radeon X600 (RV380) Accélérateur 3D
GPU
--------------------------------------------------------------------------------
[ PCI Express x16: ATI Radeon X600 (RV380) ]
Propriétés du processeur graphique:
Carte vidéo ATI Radeon X600 (RV380)
Nom de code RV380
Périphérique PCI 1002 / 3E50
Transistors 75 million(s)
Technologie utilisée 0.13u
Type du bus PCI Express x16 @ x16
Taille de la mémoire 64 Mo
Vitesse d'horloge 371 MHz (original: 375 MHz)
Horloge RAMDAC 400 MHz
Pipelines Pixel 4
Pipeline TMU Per 1
Shaders Vertex 2 (v2.0)
Shaders Pixel 1 (v2.0)
Gestion du matériel DirectX DirectX v9.0
Pixel Fillrate 1484 MPixel/s
Texel Fillrate 1484 MTexel/s
Propriétés du bus mémoire:
Type du bus DDR
Largeur du bus 64 bits
Horloge réelle 202 MHz (DDR) (original: 202 MHz)
Horloge effective 404 MHz
Bande passante 3232 Mo/s
Performances mémoire:
CAS Latency (CL) 3T
RAS To CAS Delay (tRCD) 6T
RAS Precharge (tRP) 6T
RAS Active Time (tRAS) 12T
Row Refresh Cycle Time (tRFC) 22T
RAS To RAS Delay (tRRD) 2T
Write Recovery Time (tWR) 3T
Fabricant du processeur graphique:
Nom de l'entreprise ATI Technologies Inc.
Information sur le produit http://www.ati.com/products/gamer.html
Télécharger le pilote http://www.ati.com/support/driver.html
ATI GPU Registers:
ati-00F8 04000000
ati-0140 00000060
ati-0144 1A28B323
ati-0148 1FFF0000
ati-0154 F0000000
ati-0158 31320032
ati-0178 00009024
ati-01C0 01FF0000
ati-4018 5AC15605
ati-CLKIND-0A 03371E04
ati-CLKIND-0B 00001A00
ati-CLKIND-0C 0400BC00
ati-CLKIND-0D 00007FFA
ati-CLKIND-0E 04003C00
ati-CLKIND-0F 00000000
ati-CLKIND-12 001F1212
ati-MCIND-6C 00000000
Bureau
--------------------------------------------------------------------------------
Propriétés du bureau:
Technologie utilisée Affichage Raster
Résolution 800 x 600
Profondeur de couleurs 32 bits
Plans de couleurs 1
Résolution des polices 96 dpi
Hauteur/largeur en pixels 36 / 36
Diagonale en pixels 51
Vitesse de rafraîchissement verticale Par défaut
Image de fond d'écran C:\Documents and Settings\perrine lascaux\Local Settings\Application Data\Microsoft\Wallpaper1.bmp
Effets graphiques:
Animation des combo-box Activé
Effet d'ombre tombante Activé
Effet de menu plat Activé
Lissage des polices Activé
Dessin de la fenêtre lors des déplacements Activé
Gradient dans les barres de titre Activé
Cacher les raccourcis clavier Activé
Mise en relief des éléments sous la souris Activé
Césure des titres d'icônes Activé
Déroulement non saccadé des listes Activé
Animation du menu Activé
Effet d'estompement du menu Activé
Animation de minimisation/restauration Activé
Ombre du pointeur de la souris Activé
Effet d'estompement de la sélection Activé
Utilisation des sons visuels (ShowSounds) Désactivé(e)
Animation des bulles d'aide Activé
Estompement des bulles d'aide Activé
Extension Windows Plus! Désactivé(e)
Multi-moniteurs
--------------------------------------------------------------------------------
Identifiant du périphérique Primaire Coin en haut à gauche Coin en bas à droite
\\.\DISPLAY1 Oui (0,0) (800,600)
Audio PCI/PnP
--------------------------------------------------------------------------------
Description du périphérique Type
Intel 82801FB ICH6 - High Definition Audio Controller [B-1] PCI
Stockage Windows
--------------------------------------------------------------------------------
[ Generic 2.0 Reader -CF USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -CF USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ Generic 2.0 Reader -MS USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -MS USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ Generic 2.0 Reader -SD USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -SD USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ Generic 2.0 Reader -SM USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -SM USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ Generic 2.0 Reader -xD USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -xD USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ ST3200827A ]
Propriétés du périphérique :
Description du pilote ST3200827A
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
Fabricant du périphérique:
Nom de l'entreprise Seagate Technology LLC
Information sur le produit http://www.seagate.com/products
[ _NEC DVD_RW ND-4550A ]
Propriétés du périphérique :
Description du pilote _NEC DVD_RW ND-4550A
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF cdrom.inf
Propriétés du disque optique:
Fabricant NEC
Type du périphérique DVD+RW/DVD-RW/DVD-RAM
Interface ATAPI
Vitesses d'écriture:
DVD+R9 Dual Layer 8x
DVD+R 16x
DVD+RW 8x
DVD-R9 Dual Layer 6x
DVD-R 16x
DVD-RW 8x
DVD-RAM 5x
CD-R 48x
CD-RW 32x
Vitesses de lecture:
DVD-ROM 16x
CD-ROM 48x
Fabricant du périphérique:
Nom de l'entreprise NEC Corporation
Information sur le produit http://www.nec-global.com/prod/index.html
Télécharger le firmware https://www.nec.com/en/global/support/downloads/
[ Canal IDE principal ]
Propriétés du périphérique :
Description du pilote Canal IDE principal
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
Ressources des périphériques:
IRQ 14
Port 01F0-01F7
Port 03F6-03F6
[ Canal IDE principal ]
Propriétés du périphérique :
Description du pilote Canal IDE principal
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
[ Canal IDE secondaire ]
Propriétés du périphérique :
Description du pilote Canal IDE secondaire
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
Ressources des périphériques:
Port 0170-0177
Port 0376-0376
[ Canal IDE secondaire ]
Propriétés du périphérique :
Description du pilote Canal IDE secondaire
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
[ Contrôleur IDE standard double canal PCI ]
Propriétés du périphérique :
Description du pilote Contrôleur IDE standard double canal PCI
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
Ressources des périphériques:
IRQ 19
Port 7400-740F
Port 7800-7803
Port 8000-8007
Port 8400-8403
Port 8800-8807
[ Contrôleur IDE standard double canal PCI ]
Propriétés du périphérique :
Description du pilote Contrôleur IDE standard double canal PCI
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
Ressources des périphériques:
Port FFA0-FFAF
Disques logiques
--------------------------------------------------------------------------------
Disque Type de disque Système de fichiers Taille totale Espace utilisé Espace disponible % libre Numéro de série du volume
C: Disque local NTFS 190779 Mo 11753 Mo 179026 Mo 94 % 8465-BEF5
D: Disque amovible
E: Disque amovible
F: Disque amovible
G: Disque amovible
H: Disque amovible
I: Lecteur optique
Disques physiques
--------------------------------------------------------------------------------
[ Disque nº1 - ST3200827A (186 Go) ]
Partition Type de partition Disque Offset de démarrage Taille de la partition
#1 (Active) NTFS C: 0 MB 190779 MB
Disques optiques
--------------------------------------------------------------------------------
[ _NEC DVD_RW ND-4550A ]
Propriétés du disque optique:
Description du périphérique _NEC DVD_RW ND-4550A
Fabricant NEC
Type du périphérique DVD+RW/DVD-RW/DVD-RAM
Interface ATAPI
Vitesses d'écriture:
DVD+R9 Dual Layer 8x
DVD+R 16x
DVD+RW 8x
DVD-R9 Dual Layer 6x
DVD-R 16x
DVD-RW 8x
DVD-RAM 5x
CD-R 48x
CD-RW 32x
Vitesses de lecture:
DVD-ROM 16x
CD-ROM 48x
Fabricant du périphérique:
Nom de l'entreprise NEC Corporation
Information sur le produit http://www.nec-global.com/prod/index.html
Télécharger le firmware https://www.nec.com/en/global/support/downloads/
ASPI
--------------------------------------------------------------------------------
Hôte ID LUN Type du périphérique Vendeur Modèle Rev Informations supplémentaires
00 00 00 Disque dur ST320082 7A
00 01 00 Lecteur optique _NEC DVD _RW ND-4550A
00 07 00 Carte hôte atapi
ATA
--------------------------------------------------------------------------------
[ ST3200827A (4ND2KJKJ) ]
Propriétés du périphérique ATA:
Identifiant du modèle ST3200827A
Numéro de série 4ND2KJKJ
Révision 3.AAE
Paramètres 387621 cylindres, 16 têtes, 63 secteurs par piste, 512 octets par secteur
Secteurs LBA 390721968
Tampon 8 Mo
Secteurs multiples 16
Octets ECC 4
Mode de transfert PIO maximum PIO 4
Mode de transfert UDMA maximum UDMA 5 (ATA-100)
Mode de transfert UDMA actif UDMA 5 (ATA-100)
Capacité hors formatage 190782 Mo
Fonctionnalités du périphérique ATA :
SMART Géré
Mode de sécurité Géré
Économie d'énergie Géré
Gestion de l'économie d'énergie APM Non géré
Cache en écriture Géré
Host Protected Area Géré
Power-Up In Standby Non géré
Automatic Acoustic Management Non géré
48-bit LBA Géré
Device Configuration Overlay Géré
Fabricant du périphérique ATA :
Nom de l'entreprise Seagate Technology LLC
Information sur le produit http://www.seagate.com/products
SMART
--------------------------------------------------------------------------------
[ ST3200827A (4ND2KJKJ) ]
ID Description de l'attribut Seuil Valeur Pire valeur Données État
01 Raw Read Error Rate 6 107 88 12811894 OK (la valeur est normale)
03 Spin Up Time 0 98 98 0 OK (fonctionnera toujours)
04 Start/Stop Count 20 100 100 568 OK (la valeur est normale)
05 Reallocated Sector Count 36 100 100 15 OK (la valeur est normale)
07 Seek Error Rate 30 61 57 21646115 OK (la valeur est normale)
09 Power-On Time Count 0 100 100 681 OK (fonctionnera toujours)
0A Spin Retry Count 97 100 100 0 OK (la valeur est normale)
0C Power Cycle Count 20 100 100 572 OK (la valeur est normale)
BB <spécifique au vendeur> 0 100 100 0 OK (fonctionnera toujours)
BD <spécifique au vendeur> 0 100 100 0 OK (fonctionnera toujours)
BE <spécifique au vendeur> 45 68 57 537919520 OK (la valeur est normale)
C2 Temperature 0 32 43 32 OK (fonctionnera toujours)
C3 Hardware ECC Recovered 0 63 46 78306667 OK (fonctionnera toujours)
C5 Current Pending Sector Count 0 100 100 0 OK (fonctionnera toujours)
C6 Off-Line Uncorrectable Sector Count 0 100 100 0 OK (fonctionnera toujours)
C7 Ultra ATA CRC Error Rate 0 200 200 0 OK (fonctionnera toujours)
C8 Write Error Rate 0 100 253 0 OK (fonctionnera toujours)
CA <spécifique au vendeur> 0 100 253 0 OK (fonctionnera toujours)
Réseau Windows
--------------------------------------------------------------------------------
[ Carte réseau Fast Ethernet PCI Realtek RTL8139 Family ]
Propriétés de la carte réseau:
Carte réseau Carte réseau Fast Ethernet PCI Realtek RTL8139 Family
Type d'interface Ethernet
Adresse matérielle 00-15-F2-62-E7-53
Nom de la connexion Connexion au réseau local
Vitesse de la connexion 100 Mbps
MTU 1500 octets
Obtention du bail DHCP 20/06/2008 11:13:15
Expiration du bail DHCP 21/06/2008 11:13:15
Octets reçus 39392873 (37.6 Mo)
Octets envoyés 1791405 (1.7 Mo)
Adresses de la carte:
Masque de sous-réseau 192.168.1.20 / 255.255.255.0
Passerelle 192.168.1.1
DHCP 192.168.1.1
DNS 192.168.1.1
Fabricant de la carte réseau:
Nom de l'entreprise Realtek Semiconductor Corp.
Information sur le produit http://www.realtek.com.tw/products/products1-1.aspx?lineid=1
Télécharger le pilote http://www.realtek.com.tw/downloads/downloads1-1.aspx?lineid=1
Réseau PCI/PnP
--------------------------------------------------------------------------------
Description du périphérique Type
Realtek RTL8139 PCI Fast Ethernet Adapter [A/B/C] PCI
Vidéo DirectX
--------------------------------------------------------------------------------
[ Pilote d'affichage principal ]
Propriétés du périphérique DirectDraw :
Nom du pilote DirectDraw display
Description du pilote DirectDraw Pilote d'affichage principal
Pilote matériel vga.dll
Description du matériel
Son DirectX
--------------------------------------------------------------------------------
[ Périphérique audio principal ]
Propriétés du périphérique DirectSound :
Description du périphérique Périphérique audio principal
Module du pilote
Tampons principaux 0
Taux d'échantillonnage min/max des tampons secondaires 0 / 0 Hz
Formats de son des tampons principaux Aucun(e)
Formats de son des tampons secondaires Aucun(e)
Tampons de son (total/libres) 0 / 0
Tampons de son statiques (total/libres) 0 / 0
Tampons de son streaming (total/libres) 0 / 0
Tampons de son 3D (total/libres) 0 / 0
Tampons de son 3D statiques (total/libres) 0 / 0
Tampons de son 3D streaming (total/libres) 0 / 0
Fonctionnalités du périphérique DirectSound :
Pilote certifié Non
Périphérique émulé Non
Taux d'échantillonnage précis Non géré
DirectSound3D Non géré
Creative EAX 1.0 Non géré
Creative EAX 2.0 Non géré
Creative EAX 3.0 Non géré
Musique DirectX
--------------------------------------------------------------------------------
[ Microsoft Synthesizer ]
Propriétés du périphérique DirectMusic:
Description du périphérique Microsoft Synthesizer
Type de synthétiseur Logiciels
Classe de périphérique Port de sortie
Type du périphérique User-Mode Synthesizer
Canaux audio 2
Canaux MIDI 16000
Voix 1000
Mémoire disponible Mémoire système
Fonctionnalités du périphérique DirectMusic :
Jeu d'instruments GM intégré Non
Jeu de sons Roland GS intégré Non
DirectSound Géré
Collection d'exemples DLS L1 Géré
Collection d'exemples DLS L2 Géré
Port externe MIDI Non
Taille de la mémoire DLS attachée Non
Partage de port Non géré
Effet chorus Non géré
Effet délai Non géré
Effet réverb Géré
Entrée DirectX
--------------------------------------------------------------------------------
[ Souris ]
Propriétés du périphérique DirectInput:
Description du périphérique Souris
Type du périphérique Inconnu
Sous-type du périphérique Inconnu
Axes 3
Boutons/Touches 3
Fonctionnalités du périphérique DirectInput :
Périphérique émulé Oui
Alias Device Non
Polled Device Non
Polled Data Format Non
Attack Force Feedback Non géré
Deadband Force Feedback Non géré
Fade Force Feedback Non géré
Force Feedback Non géré
Saturation Force Feedback Non géré
+/- Force Feedback Coefficients Non géré
+/- Force Feedback Saturation Non géré
[ Clavier ]
Propriétés du périphérique DirectInput:
Description du périphérique Clavier
Type du périphérique Inconnu
Sous-type du périphérique Inconnu
Boutons/Touches 128
Fonctionnalités du périphérique DirectInput :
Périphérique émulé Oui
Alias Device Non
Polled Device Non
Polled Data Format Non
Attack Force Feedback Non géré
Deadband Force Feedback Non géré
Fade Force Feedback Non géré
Force Feedback Non géré
Saturation Force Fe
--------------------------------------------------------------------------------
Version EVEREST v2.20.405/fr
Site web http://www.lavalys.com/
Type de rapport Générateur de rapports
Ordinateur LASCAUX-5X12KLM
Générateur perrine lascaux
Système d'exploitation Microsoft Windows XP Home Edition 5.1.2600 (WinXP Retail)
Date 2008-06-20
Heure 11:47
Résumé
--------------------------------------------------------------------------------
Ordinateur:
Système d'exploitation Microsoft Windows XP Home Edition
Service Pack du système Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Nom du système LASCAUX-5X12KLM
Nom de l'utilisateur perrine lascaux
Carte mère:
Type de processeur Intel Pentium 4 516, 2933 MHz (22 x 133)
Nom de la carte mère Asus P5GD1-FM (FSC OEM) (3 PCI, 1 PCI-E x16, 4 DDR DIMM, Audio, LAN, IEEE-1394)
Chipset de la carte mère Intel Grantsdale i915P
Mémoire système 1536 Mo (PC3200 DDR SDRAM)
Type de BIOS AMI (11/28/05)
Port de communication Port de communication (COM1)
Moniteur:
Carte vidéo ATI Radeon X600 (RV380)
Accélérateur 3D ATI Radeon X600 (RV380)
Multimédia:
Carte audio Intel 82801FB ICH6 - High Definition Audio Controller [B-1]
Stockage:
Contrôleur IDE Contrôleur IDE standard double canal PCI
Contrôleur IDE Contrôleur IDE standard double canal PCI
Disque dur ST3200827A (186 Go, IDE)
Disque dur Generic 2.0 Reader -SM USB Device
Disque dur Generic 2.0 Reader -CF USB Device
Disque dur Generic 2.0 Reader -SD USB Device
Disque dur Generic 2.0 Reader -MS USB Device
Disque dur Generic 2.0 Reader -xD USB Device
Lecteur optique _NEC DVD_RW ND-4550A (DVD+R9:8x, DVD-R9:6x, DVD+RW:16x/8x, DVD-RW:16x/8x, DVD-RAM:5x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)
État des disques durs SMART OK
Partitions:
C: (NTFS) 190779 Mo (179026 Mo libre)
Entrée:
Clavier Périphérique clavier PIH
Souris Logitech USB First/Pilot Mouse+
Réseau:
Carte réseau Carte réseau Fast Ethernet PCI Realtek RTL8139 Family (192.168.1.20)
Périphériques:
Contrôleur USB1 Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Contrôleur USB1 Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Contrôleur USB1 Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Contrôleur USB1 Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Contrôleur USB2 Intel 82801FB ICH6 - Enhanced USB2 Controller [B-1]
Périphérique USB Logitech USB First/Pilot Mouse+
Périphérique USB Périphérique de stockage de masse USB
Périphérique USB Périphérique d'interface utilisateur USB
Périphérique USB Périphérique d'interface utilisateur USB
Périphérique USB Périphérique USB composite
DMI
--------------------------------------------------------------------------------
[ BIOS ]
Propriétés du BIOS:
Vendeur American Megatrends Inc.
Version 1012.003
Date de sortie 11/28/2005
Taille 512 Ko
Périphériques de démarrage Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
Fonctions disponibles Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
Standards respectés DMI, APM, ACPI, ESCD, PnP
Possibilités d'expansion ISA, PCI, AGP, USB
[ Système ]
Propriétés système:
Fabricant FUJITSU SIEMENS
Produit P5GD1-FM
Version System Version
Numéro de série System Serial Number
Identifiant unique universel 50F164A4-75FED511-9E67412F-75866CEF
Type de démarrage PCI PME#
[ Carte mère ]
Propriétés de la carte mère:
Fabricant Fujitsu Siemens
Produit P5GD1-FM
Version Rev 1.xx
Numéro de série MB-1234567890
[ Châssis ]
Propriétés du châssis:
Fabricant Chassis Manufacture
Version Chassis Version
Numéro de série Chassis Serial Number
Étiquette Asset-1234567890
Type du châssis Boîtier standard
Verrou du châssis Présent
État au démarrage En sûreté
État de l'alimentation En sûreté
Conditions de température En sûreté
Conditions de sécurité Aucun(e)
[ Contrôleur mémoire ]
Propriétés du contrôleur mémoire:
Méthode de détection d'erreurs Aucun(e)
Correction d'erreurs Aucun(e)
Interleave mémoire géré 1-Way
Interleave mémoire courant 1-Way
Vitesses de mémoire gérées 70ns, 60ns, 50ns
Types de mémoire gérés SIMM, DIMM, SDRAM
Voltages de mémoire gérés 3.3V
Taille maximale des modules mémoire 1024 Mo
Slots mémoire 4
[ Processeurs / Intel(R) Pentium(R) 4 CPU 2.93GHz ]
Propriétés du processeur:
Fabricant Intel
Version Intel(R) Pentium(R) 4 CPU 2.93GHz
Numéro de série To Be Filled By O.E.M.
Étiquette To Be Filled By O.E.M.
Numéro du type de composant To Be Filled By O.E.M.
Horloge externe 133 MHz
Vitesse d'horloge maximale 4000 MHz
Vitesse d'horloge courante 2933 MHz
Type Central Processor
Voltage 1.4 V
État Activé
Identifiant du socket Socket 775
[ Caches / L1-Cache ]
Propriétés du cache:
Type Interne
État Activé
Mode d'opération Varies with Memory Address
Taille maximale 16 Ko
Taille installée 16 Ko
Type de SRAM géré Pipeline Burst
Type de SRAM courant Pipeline Burst
Correction d'erreurs Single-bit ECC
Identifiant du socket L1-Cache
[ Caches / L2-Cache ]
Propriétés du cache:
Type Interne
État Activé
Mode d'opération Varies with Memory Address
Taille maximale 1024 Ko
Taille installée 1024 Ko
Type de SRAM géré Pipeline Burst
Type de SRAM courant Pipeline Burst
Correction d'erreurs Single-bit ECC
Identifiant du socket L2-Cache
[ Caches / L3-Cache ]
Propriétés du cache:
Type Interne
État Désactivé(e)
Taille maximale 0 Ko
Taille installée 0 Ko
Identifiant du socket L3-Cache
[ Modules mémoire / DIMM0 ]
Propriétés du module mémoire:
Identifiant du socket DIMM0
Type DIMM, SDRAM
Vitesse 50 ns
Taille installée 1024 Mo
Taille activée 1024 Mo
[ Modules mémoire / DIMM1 ]
Propriétés du module mémoire:
Identifiant du socket DIMM1
Type DIMM, SDRAM
Vitesse 50 ns
Taille installée 512 Mo
Taille activée 512 Mo
[ Modules mémoire / DIMM2 ]
Propriétés du module mémoire:
Identifiant du socket DIMM2
Type DIMM, SDRAM
Taille installée Non installé
Taille activée Non installé
[ Modules mémoire / DIMM3 ]
Propriétés du module mémoire:
Identifiant du socket DIMM3
Type DIMM, SDRAM
Taille installée Non installé
Taille activée Non installé
[ Périphériques mémoire / DIMM0 ]
Propriétés du périphérique mémoire:
Forme DIMM
Type SDRAM
Type détaillé Synchronous
Taille 1024 Mo
Vitesse 400 MHz
Taille totale 64 bits
Largeur de données 64 bits
Emplacement du périphérique DIMM0
Numéro de la banque BANK0
Fabricant Manufacturer0
Numéro de série SerNum0
Étiquette AssetTagNum0
Numéro du type de composant PartNum0
[ Périphériques mémoire / DIMM1 ]
Propriétés du périphérique mémoire:
Forme DIMM
Type SDRAM
Type détaillé Synchronous
Taille 512 Mo
Vitesse 400 MHz
Taille totale 64 bits
Largeur de données 64 bits
Emplacement du périphérique DIMM1
Numéro de la banque BANK1
Fabricant Manufacturer1
Numéro de série SerNum1
Étiquette AssetTagNum1
Numéro du type de composant PartNum1
[ Périphériques mémoire / DIMM2 ]
Propriétés du périphérique mémoire:
Forme DIMM
Emplacement du périphérique DIMM2
Numéro de la banque BANK2
Fabricant Manufacturer2
Numéro de série SerNum2
Étiquette AssetTagNum2
Numéro du type de composant PartNum2
[ Périphériques mémoire / DIMM3 ]
Propriétés du périphérique mémoire:
Forme DIMM
Emplacement du périphérique DIMM3
Numéro de la banque BANK3
Fabricant Manufacturer3
Numéro de série SerNum3
Étiquette AssetTagNum3
Numéro du type de composant PartNum3
[ Slots système / PCIEX_16 ]
Propriétés du slot système:
Identifiant du slot PCIEX_16
Usage Utilisé
Largeur du bus de données 32 bits
Longueur Court
[ Slots système / PCI_1 ]
Propriétés du slot système:
Identifiant du slot PCI_1
Type PCI
Usage Vide
Largeur du bus de données 32 bits
Longueur Court
[ Slots système / PCI_2 ]
Propriétés du slot système:
Identifiant du slot PCI_2
Type PCI
Usage Vide
Largeur du bus de données 32 bits
Longueur Court
[ Slots système / PCI_3 ]
Propriétés du slot système:
Identifiant du slot PCI_3
Type PCI
Usage Vide
Largeur du bus de données 32 bits
Longueur Court
[ Connecteurs de ports / USB1 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB1
Type du connecteur externe USB
[ Connecteurs de ports / USB2 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB2
Type du connecteur externe USB
[ Connecteurs de ports / USB3 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB3
Type du connecteur externe USB
[ Connecteurs de ports / USB4 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB4
Type du connecteur externe USB
[ Connecteurs de ports / USB5 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB5
Type du connecteur externe USB
[ Connecteurs de ports / USB6 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB6
Type du connecteur externe USB
[ Connecteurs de ports / USB7 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB7
Type du connecteur externe USB
[ Connecteurs de ports / USB8 ]
Propriétés du connecteur de port:
Type de port USB
Type du connecteur interne Aucun(e)
Désignation du connecteur externe USB8
Type du connecteur externe USB
[ Connecteurs de ports / COM 1 ]
Propriétés du connecteur de port:
Type de port Serial Port 16550A Compatible
Type du connecteur interne Aucun(e)
Désignation du connecteur externe COM 1
Type du connecteur externe DB-9 pin male
[ Connecteurs de ports / Audio Mic In ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Mic In
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line In ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line In
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line Out1 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line Out1
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line Out2 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line Out2
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line Out3 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line Out3
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / Audio Line Out4 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe Audio Line Out4
Type du connecteur externe Mini-jack (headphones)
[ Connecteurs de ports / SPDIF_OUT1 ]
Propriétés du connecteur de port:
Type de port Audio Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe SPDIF_OUT1
Type du connecteur externe On-Board Sound Input from CD-ROM
[ Connecteurs de ports / LAN ]
Propriétés du connecteur de port:
Type de port Network Port
Type du connecteur interne Aucun(e)
Désignation du connecteur externe LAN
Type du connecteur externe RJ-45
[ Connecteurs de ports / FireWire 1 ]
Propriétés du connecteur de port:
Type de port FireWire (IEEE P1394)
Type du connecteur interne Aucun(e)
Désignation du connecteur externe FireWire 1
Type du connecteur externe 1394
[ Connecteurs de ports / FireWire 2 ]
Propriétés du connecteur de port:
Type de port FireWire (IEEE P1394)
Type du connecteur interne Aucun(e)
Désignation du connecteur externe FireWire 2
Type du connecteur externe 1394
[ Connecteurs de ports / SB_IDE ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_IDE
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / SB_SATA1 ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_SATA1
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / SB_SATA2 ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_SATA2
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / SB_SATA3 ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_SATA3
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / SB_SATA4 ]
Propriétés du connecteur de port:
Désignation du connecteur interne SB_SATA4
Type du connecteur interne On-Board IDE
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / CD ]
Propriétés du connecteur de port:
Type de port Audio Port
Désignation du connecteur interne CD
Type du connecteur interne On-Board Sound Input from CD-ROM
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / FP_AUDIO ]
Propriétés du connecteur de port:
Type de port Audio Port
Désignation du connecteur interne FP_AUDIO
Type du connecteur interne On-Board Sound Input from CD-ROM
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / FLOPPY ]
Propriétés du connecteur de port:
Désignation du connecteur interne FLOPPY
Type du connecteur interne On-Board Floppy
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / CHA_FAN ]
Propriétés du connecteur de port:
Désignation du connecteur interne CHA_FAN
Type du connecteur externe Aucun(e)
[ Connecteurs de ports / CPU_FAN ]
Propriétés du connecteur de port:
Désignation du connecteur interne CPU_FAN
Type du connecteur externe Aucun(e)
[ Périphériques intégrés / Onboard Audio ]
Propriétés du périphérique intégré:
Description Onboard Audio
Overclock
--------------------------------------------------------------------------------
Propriétés du processeur:
Type de processeur Intel Pentium 4 516
Alias du processeur Prescott
Stepping du processeur G1
Engineering Sample Non
(CPUID) Nom du processeur Intel(R) Pentium(R) 4 CPU 2.93GHz
(CPUID) Révision 00000F49h
Vitesse du CPU:
Vitesse d'horloge du processeur 2927.85 MHz (original: 2933 MHz)
Multiplicateur du CPU 22.0x
FSB du CPU 133.08 MHz (original: 133 MHz)
Bus mémoire 199.63 MHz
Cache du CPU:
Cache de trace de niveau 1 12K Instructions
Cache de données de niveau 1 16 Ko
Cache de niveau 2 1 Mo (On-Die, ECC, ATC, Full-Speed)
Propriétés de la carte mère:
Identifiant de la carte mère 63-1203-000010-00101111-112805-I915$A0164001_BIOS DATE: 11/28/05 10:37:03 VER: 08.00.10
Nom de la carte mère Asus P5GD1-FM (FSC OEM) (3 PCI, 1 PCI-E x16, 4 DDR DIMM, Audio, LAN, IEEE-1394)
Propriétés du chipset:
Chipset de la carte mère Intel Grantsdale i915P
Performances mémoire 3-4-4-8 (CL-RCD-RP-RAS)
Modules de mémoire SPD:
DIMM1 1 Go PC3200 DDR SDRAM (3.0-4-4-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-3-3-6 @ 133 MHz)
DIMM2: Infineon 64D64300HU5C 512 Mo PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
Propriétés du BIOS:
Date du BIOS système 11/28/05
Date du BIOS vidéo 05/11/23
Version du BIOS 1012.003
Propriétés du processeur graphique:
Carte vidéo ATI Radeon X600 (RV380)
Nom de code RV380 (PCI Express x16 1002 / 3E50, Rev 00)
Vitesse d'horloge 371 MHz (original: 375 MHz)
Horloge mémoire 202 MHz (original: 202 MHz)
Économie d'énergie
--------------------------------------------------------------------------------
Gestion de l'économie d'énergie:
Source de courant actuelle Courant de secteur alternatif
État de la batterie Aucune batterie
Temps d'utilisation de la batterie pleine Inconnu
Temps d'utilisation restant Inconnu
Sonde
--------------------------------------------------------------------------------
Propriétés de la sonde:
Type de la sonde Winbond W83627EHF (ISA 290h)
Nom de la carte mère Asus P4GD / P4GPL / P5AD / P5GD / P5P800 Series
Températures:
Carte mère 29 °C (84 °F)
Processeur 42 °C (108 °F)
Seagate ST3200827A 32 °C (90 °F)
Ventilateurs:
Processeur 1448 RPM
Châssis 2328 RPM
Valeurs de voltage:
Noyau CPU 1.56 V
+3.3 V 3.23 V
+5 V 5.51 V
+12 V 12.04 V
Mise en veille +5 V 4.95 V
Debug Info F 91 E9 FF
Debug Info T 29 42 37
Debug Info V B0 EA CD CA FF C6 00 (03)
Processeur
--------------------------------------------------------------------------------
Propriétés du processeur:
Type de processeur Intel Pentium 4 516, 2933 MHz (22 x 133)
Alias du processeur Prescott
Stepping du processeur G1
Jeu d'instructions x86, x86-64, MMX, SSE, SSE2, SSE3
Vitesse d'horloge originelle 2933 MHz
Min / Max du multiplicateur du CPU 14x / 22x
Engineering Sample Non
Cache de trace de niveau 1 12K Instructions
Cache de données de niveau 1 16 Ko
Cache de niveau 2 1 Mo (On-Die, ECC, ATC, Full-Speed)
Multi CPU:
Identifiant de la carte mère INTEL
CPU #0 Intel(R) Pentium(R) 4 CPU 2.93GHz, 2926 MHz
CPU #1 Intel(R) Pentium(R) 4 CPU 2.93GHz, 2926 MHz
Fabricant du processeur:
Nom de l'entreprise Intel Corporation
Information sur le produit https://www.intel.com/content/www/us/en/products/processors.html
Utilisation du processeur:
CPU #1 / HTT Unité #1 0 %
CPU #1 / HTT Unité #2 100 %
CPUID
--------------------------------------------------------------------------------
(CPUID) Propriétés:
(CPUID) Fabricant GenuineIntel
(CPUID) Nom du processeur Intel(R) Pentium(R) 4 CPU 2.93GHz
(CPUID) Révision 00000F49h
(IA) Identifiant de la marque 00h (Inconnu)
Identifiant de la plate-forme 13h (Socket 775)
(IA) Numéro de série du processeur Inconnu
Révision du Microcode Update 3
Unités HTT / CMP 2 / 1
Jeu d'instructions:
Extensions 64 bits x86 (AMD64, EM64T) Géré
Alternate Instruction Set Non géré
AMD 3DNow! Non géré
AMD 3DNow! Professional Non géré
AMD Enhanced 3DNow! Non géré
AMD Extended MMX Non géré
Cyrix Extended MMX Non géré
IA-64 Non géré
IA MMX Géré
IA SSE Géré
IA SSE 2 Géré
IA SSE 3 Géré
Instruction CLFLUSH Géré
Instruction CMPXCHG8B Géré
Instruction CMPXCHG16B Géré
Instruction Conditional Move Géré
Instruction MONITOR / MWAIT Géré
Instruction RDTSCP Non géré
Instruction SYSCALL / SYSRET Non géré
Instruction SYSENTER / SYSEXIT Géré
Instruction VIA FEMMS Non géré
Dispositifs de sécurité:
Advanced Cryptography Engine (ACE) Non géré
Prévention de l'exécution des données (DEP, NX, EDB) Non géré
Hardware Random Number Generator (RNG) Non géré
Montgomery Multiplier & Hash Engine Non géré
Processor Serial Number (PSN) Non géré
Dispositifs de l'économie d'énergie:
Automatic Clock Control Géré
Enhanced Halt State (C1E) Non géré
Enhanced SpeedStep Technology (EIST, ESS) Non géré
Frequency ID Control Non géré
LongRun Non géré
LongRun Table Interface Non géré
PowerSaver 1.0 Non géré
PowerSaver 2.0 Non géré
PowerSaver 3.0 Non géré
Processor Duty Cycle Control Géré
Software Thermal Control Non géré
Temperature Sensing Diode Non géré
Thermal Monitor 1 Géré
Thermal Monitor 2 Géré
Thermal Monitoring Non géré
Thermal Trip Non géré
Voltage ID Control Non géré
(CPUID) Fonctionnalités:
36-bit Page Size Extension Géré
Address Region Registers (ARR) Non géré
CPL Qualified Debug Store Géré
Debug Trace Store Géré
Debugging Extension Géré
Fast Save & Restore Géré
Hyper-Threading Technology (HTT) Géré, Activé
L1 Context ID Géré
Local APIC On Chip Géré
Machine Check Architecture (MCA) Géré
Machine Check Exception (MCE) Géré
Memory Configuration Registers (MCR) Non géré
Memory Type Range Registers (MTRR) Géré
Model Specific Registers (MSR) Géré
Page Attribute Table (PAT) Géré
Page Global Extension Géré
Page Size Extension (PSE) Géré
Pending Break Event Géré
Physical Address Extension (PAE) Géré
Secure Virtual Machine Extensions (Pacifica) Non géré
Self-Snoop Géré
Time Stamp Counter (TSC) Géré
Virtual Machine Extensions (Vanderpool) Non géré
Virtual Mode Extension Géré
CPUID Registers (CPU #1):
CPUID 00000000 00000005-756E6547-6C65746E-49656E69
CPUID 00000001 00000F49-00020800-0000651D-BFEBFBFF
CPUID 00000002 605B5001-00000000-00000000-007C7040
CPUID 00000003 00000000-00000000-00000000-00000000
CPUID 00000004 00004121-01C0003F-0000001F-00000000
CPUID 00000005 00000040-00000040-00000000-00000000
CPUID 80000000 80000008-00000000-00000000-00000000
CPUID 80000001 00000000-00000000-00000001-20000000
CPUID 80000002 20202020-20202020-20202020-6E492020
CPUID 80000003 286C6574-50202952-69746E65-52286D75
CPUID 80000004 20342029-20555043-33392E32-007A4847
CPUID 80000005 00000000-00000000-00000000-00000000
CPUID 80000006 00000000-00000000-04006040-00000000
CPUID 80000007 00000000-00000000-00000000-00000000
CPUID 80000008 00003024-00000000-00000000-00000000
CPUID Registers (CPU #2 Virtual):
CPUID 00000000 00000005-756E6547-6C65746E-49656E69
CPUID 00000001 00000F49-01020800-0000651D-BFEBFBFF
CPUID 00000002 605B5001-00000000-00000000-007C7040
CPUID 00000003 00000000-00000000-00000000-00000000
CPUID 00000004 00004121-01C0003F-0000001F-00000000
CPUID 00000005 00000040-00000040-00000000-00000000
CPUID 80000000 80000008-00000000-00000000-00000000
CPUID 80000001 00000000-00000000-00000001-20000000
CPUID 80000002 20202020-20202020-20202020-6E492020
CPUID 80000003 286C6574-50202952-69746E65-52286D75
CPUID 80000004 20342029-20555043-33392E32-007A4847
CPUID 80000005 00000000-00000000-00000000-00000000
CPUID 80000006 00000000-00000000-04006040-00000000
CPUID 80000007 00000000-00000000-00000000-00000000
CPUID 80000008 00003024-00000000-00000000-00000000
MSR Registers:
MSR 00000017 0012-0000-0000-0000
MSR 0000002A 0000-0000-0000-0000
MSR 0000002C 0000-0000-1611-0816
MSR 0000008B 0000-0003-0000-0000
MSR 0000019A 0000-0000-0000-0002
MSR 0000019B 0000-0000-0000-0000
MSR 0000019C 0000-0000-0000-0000
MSR 0000019D 0000-0000-0000-0E2D
MSR 000001A0 0000-0004-2284-2081
Carte mère
--------------------------------------------------------------------------------
Propriétés de la carte mère:
Identifiant de la carte mère 63-1203-000010-00101111-112805-I915$A0164001_BIOS DATE: 11/28/05 10:37:03 VER: 08.00.10
Nom de la carte mère Asus P5GD1-FM (FSC OEM)
Propriétés du bus principal:
Type du bus Intel NetBurst
Largeur du bus 64 bits
Horloge réelle 133 MHz (QDR)
Horloge effective 533 MHz
Bande passante 4266 Mo/s
Propriétés du bus mémoire:
Type du bus DDR SDRAM
Largeur du bus 64 bits
Horloge réelle 200 MHz (DDR)
Horloge effective 400 MHz
Bande passante 3200 Mo/s
Propriétés du bus chipset:
Type du bus Intel Direct Media Interface
Informations physiques sur la carte mère:
Sockets/slots processeur 1 Socket 775
Slots d'expansion 3 PCI, 1 PCI-E x16
Slots RAM 4 DDR DIMM
Périphériques intégrés Audio, LAN, IEEE-1394
Forme Micro ATX
Taille de la carte mère 240 mm x 240 mm
Chipset de la carte mère i915P
Fabricant de la carte mère:
Nom de l'entreprise ASUSTeK Computer Inc.
Information sur le produit http://www.asus.com/products1.aspx?l1=3
Télécharger le BIOS http://support.asus.com/download/download.aspx?SLanguage=en-us
Mémoire
--------------------------------------------------------------------------------
Mémoire physique:
Total 1535 Mo
Utilisé 386 Mo
Disponible 1149 Mo
Utilisation 25 %
Zone de swap:
Total 3434 Mo
Utilisé 236 Mo
Disponible 3198 Mo
Utilisation 7 %
Mémoire virtuelle:
Total 4970 Mo
Utilisé 622 Mo
Disponible 4347 Mo
Utilisation 13 %
Physical Address Extension (PAE):
Supporté par le système d'exploitation Oui
Supporté par le processeur Oui
Active Non
SPD
--------------------------------------------------------------------------------
[ DIMM1: 1 Go PC3200 DDR SDRAM ]
Propriétés du module mémoire:
Numéro de série Aucun(e)
Taille du module 1024 Mo (2 ranks, 4 banks)
Type du module Unbuffered
Type de mémoire DDR SDRAM
Vitesse de mémoire PC3200 (200 MHz)
Largeur du module 64 bit
Voltage du module SSTL 2.5
Méthode de détection d'erreurs Aucun(e)
Taux de rafraîchissement Réduit (7.8 us), Self-Refresh
Performances mémoire:
@ 200 MHz 3.0-4-4-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
Fonctionnalités du module mémoire:
Early RAS# Precharge Non géré
Auto-Precharge Non géré
Precharge All Non géré
Write1/Read Burst Non géré
Buffered Address/Control Inputs Non géré
Registered Address/Control Inputs Non géré
On-Card PLL (Clock) Non géré
Buffered DQMB Inputs Non géré
Registered DQMB Inputs Non géré
Differential Clock Input Géré
Redundant Row Address Non géré
[ DIMM2: Infineon 64D64300HU5C ]
Propriétés du module mémoire:
Nom du module Infineon 64D64300HU5C
Numéro de série 0D06DE15h
Date de fabrication Semaine 16 / 2006
Taille du module 512 Mo (1 rank, 4 banks)
Type du module Unbuffered
Type de mémoire DDR SDRAM
Vitesse de mémoire PC3200 (200 MHz)
Largeur du module 64 bit
Voltage du module SSTL 2.5
Méthode de détection d'erreurs Aucun(e)
Taux de rafraîchissement Réduit (7.8 us), Self-Refresh
Performances mémoire:
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS)
Fonctionnalités du module mémoire:
Early RAS# Precharge Géré
Auto-Precharge Non géré
Precharge All Non géré
Write1/Read Burst Non géré
Buffered Address/Control Inputs Non géré
Registered Address/Control Inputs Non géré
On-Card PLL (Clock) Non géré
Buffered DQMB Inputs Non géré
Registered DQMB Inputs Non géré
Differential Clock Input Géré
Redundant Row Address Non géré
Fabricant du module mémoire:
Nom de l'entreprise Infineon Technologies AG
Information sur le produit https://www.infineon.com/?tabId=1
Chipset
--------------------------------------------------------------------------------
[ North Bridge: Intel Grantsdale i915P ]
Propriétés du chipset North Bridge:
North Bridge Intel Grantsdale i915P
Révision / Stepping 0E / C2
Forme du composant 1210 Pin FC-BGA
Taille du composant 3.75 cm x 3.75 cm
Voltage au coeur 1.5 V
In-Order Queue Depth 12
Contrôleur mémoire:
Type Dual Channel (128 bits)
Mode actif Single Channel (64 bits)
Performances mémoire:
CAS Latency (CL) 3T
RAS To CAS Delay (tRCD) 4T
RAS Precharge (tRP) 4T
RAS Active Time (tRAS) 8T
Correction d'erreurs:
ECC Non géré
ChipKill ECC Non géré
RAID Non géré
ECC Scrubbing Non géré
Slots mémoire:
Slot DRAM nº1 1024 Mo (PC3200 DDR SDRAM)
Slot DRAM nº2 512 Mo (PC3200 DDR SDRAM)
Contrôleur PCI Express:
PCI-E x16 port #2 Utilisé @ x16 (ATI Radeon X600 (RV380) Video Adapter)
Fabricant du chipset:
Nom de l'entreprise Intel Corporation
Information sur le produit https://www.intel.com/content/www/us/en/products/chipsets.html
Télécharger le pilote https://www.intel.com/content/www/us/en/support.html
[ South Bridge: Intel 82801FB ICH6 ]
Propriétés du chipset South Bridge:
South Bridge Intel 82801FB ICH6
Révision / Stepping D3 / B1
Forme du composant 609 Pin mBGA
Taille du composant 3.1 cm x 3.1 cm
Voltage au coeur 1.5 V
High Definition Audio:
Type du contrôleur audio Intel 82801FB(M) ICH6
Nom du codec Realtek ALC880(D)
Identifiant du codec 10EC0880h
Révision du codec 00090500h
Contrôleur PCI Express:
PCI-E x1 port #1 Vide
PCI-E x1 port #2 Vide
PCI-E x1 port #3 Vide
PCI-E x1 port #4 Vide
Fabricant du chipset:
Nom de l'entreprise Intel Corporation
Information sur le produit https://www.intel.com/content/www/us/en/products/chipsets.html
Télécharger le pilote https://www.intel.com/content/www/us/en/support.html
BIOS
--------------------------------------------------------------------------------
Propriétés du BIOS:
Type de BIOS AMI
Date du BIOS système 11/28/05
Date du BIOS vidéo 05/11/23
Fabricant du BIOS:
Nom de l'entreprise American Megatrends Inc.
Information sur le produit https://ami.com/en/products/bios-uefi-firmware/
Mises à jour du BIOS http://www.esupport.com/biosagent/index.cfm?refererid=40
Problèmes et suggestions:
Suggestion Are you looking for a BIOS Upgrade? Contact eSupport Today!
Suggestion Le BIOS système a plus de 2 ans. Mettez-le à jour si nécessaire.
Vidéo PCI/AGP
--------------------------------------------------------------------------------
Description du périphérique Type du périphérique
ATI Radeon X600 (RV380) Carte vidéo
ATI Radeon X600 (RV380) Accélérateur 3D
GPU
--------------------------------------------------------------------------------
[ PCI Express x16: ATI Radeon X600 (RV380) ]
Propriétés du processeur graphique:
Carte vidéo ATI Radeon X600 (RV380)
Nom de code RV380
Périphérique PCI 1002 / 3E50
Transistors 75 million(s)
Technologie utilisée 0.13u
Type du bus PCI Express x16 @ x16
Taille de la mémoire 64 Mo
Vitesse d'horloge 371 MHz (original: 375 MHz)
Horloge RAMDAC 400 MHz
Pipelines Pixel 4
Pipeline TMU Per 1
Shaders Vertex 2 (v2.0)
Shaders Pixel 1 (v2.0)
Gestion du matériel DirectX DirectX v9.0
Pixel Fillrate 1484 MPixel/s
Texel Fillrate 1484 MTexel/s
Propriétés du bus mémoire:
Type du bus DDR
Largeur du bus 64 bits
Horloge réelle 202 MHz (DDR) (original: 202 MHz)
Horloge effective 404 MHz
Bande passante 3232 Mo/s
Performances mémoire:
CAS Latency (CL) 3T
RAS To CAS Delay (tRCD) 6T
RAS Precharge (tRP) 6T
RAS Active Time (tRAS) 12T
Row Refresh Cycle Time (tRFC) 22T
RAS To RAS Delay (tRRD) 2T
Write Recovery Time (tWR) 3T
Fabricant du processeur graphique:
Nom de l'entreprise ATI Technologies Inc.
Information sur le produit http://www.ati.com/products/gamer.html
Télécharger le pilote http://www.ati.com/support/driver.html
ATI GPU Registers:
ati-00F8 04000000
ati-0140 00000060
ati-0144 1A28B323
ati-0148 1FFF0000
ati-0154 F0000000
ati-0158 31320032
ati-0178 00009024
ati-01C0 01FF0000
ati-4018 5AC15605
ati-CLKIND-0A 03371E04
ati-CLKIND-0B 00001A00
ati-CLKIND-0C 0400BC00
ati-CLKIND-0D 00007FFA
ati-CLKIND-0E 04003C00
ati-CLKIND-0F 00000000
ati-CLKIND-12 001F1212
ati-MCIND-6C 00000000
Bureau
--------------------------------------------------------------------------------
Propriétés du bureau:
Technologie utilisée Affichage Raster
Résolution 800 x 600
Profondeur de couleurs 32 bits
Plans de couleurs 1
Résolution des polices 96 dpi
Hauteur/largeur en pixels 36 / 36
Diagonale en pixels 51
Vitesse de rafraîchissement verticale Par défaut
Image de fond d'écran C:\Documents and Settings\perrine lascaux\Local Settings\Application Data\Microsoft\Wallpaper1.bmp
Effets graphiques:
Animation des combo-box Activé
Effet d'ombre tombante Activé
Effet de menu plat Activé
Lissage des polices Activé
Dessin de la fenêtre lors des déplacements Activé
Gradient dans les barres de titre Activé
Cacher les raccourcis clavier Activé
Mise en relief des éléments sous la souris Activé
Césure des titres d'icônes Activé
Déroulement non saccadé des listes Activé
Animation du menu Activé
Effet d'estompement du menu Activé
Animation de minimisation/restauration Activé
Ombre du pointeur de la souris Activé
Effet d'estompement de la sélection Activé
Utilisation des sons visuels (ShowSounds) Désactivé(e)
Animation des bulles d'aide Activé
Estompement des bulles d'aide Activé
Extension Windows Plus! Désactivé(e)
Multi-moniteurs
--------------------------------------------------------------------------------
Identifiant du périphérique Primaire Coin en haut à gauche Coin en bas à droite
\\.\DISPLAY1 Oui (0,0) (800,600)
Audio PCI/PnP
--------------------------------------------------------------------------------
Description du périphérique Type
Intel 82801FB ICH6 - High Definition Audio Controller [B-1] PCI
Stockage Windows
--------------------------------------------------------------------------------
[ Generic 2.0 Reader -CF USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -CF USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ Generic 2.0 Reader -MS USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -MS USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ Generic 2.0 Reader -SD USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -SD USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ Generic 2.0 Reader -SM USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -SM USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ Generic 2.0 Reader -xD USB Device ]
Propriétés du périphérique :
Description du pilote Generic 2.0 Reader -xD USB Device
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
[ ST3200827A ]
Propriétés du périphérique :
Description du pilote ST3200827A
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF disk.inf
Fabricant du périphérique:
Nom de l'entreprise Seagate Technology LLC
Information sur le produit http://www.seagate.com/products
[ _NEC DVD_RW ND-4550A ]
Propriétés du périphérique :
Description du pilote _NEC DVD_RW ND-4550A
Date du pilote 01/07/2001
Version du pilote 5.1.2535.0
Fournisseur du pilote Microsoft
Fichier INF cdrom.inf
Propriétés du disque optique:
Fabricant NEC
Type du périphérique DVD+RW/DVD-RW/DVD-RAM
Interface ATAPI
Vitesses d'écriture:
DVD+R9 Dual Layer 8x
DVD+R 16x
DVD+RW 8x
DVD-R9 Dual Layer 6x
DVD-R 16x
DVD-RW 8x
DVD-RAM 5x
CD-R 48x
CD-RW 32x
Vitesses de lecture:
DVD-ROM 16x
CD-ROM 48x
Fabricant du périphérique:
Nom de l'entreprise NEC Corporation
Information sur le produit http://www.nec-global.com/prod/index.html
Télécharger le firmware https://www.nec.com/en/global/support/downloads/
[ Canal IDE principal ]
Propriétés du périphérique :
Description du pilote Canal IDE principal
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
Ressources des périphériques:
IRQ 14
Port 01F0-01F7
Port 03F6-03F6
[ Canal IDE principal ]
Propriétés du périphérique :
Description du pilote Canal IDE principal
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
[ Canal IDE secondaire ]
Propriétés du périphérique :
Description du pilote Canal IDE secondaire
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
Ressources des périphériques:
Port 0170-0177
Port 0376-0376
[ Canal IDE secondaire ]
Propriétés du périphérique :
Description du pilote Canal IDE secondaire
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
[ Contrôleur IDE standard double canal PCI ]
Propriétés du périphérique :
Description du pilote Contrôleur IDE standard double canal PCI
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
Ressources des périphériques:
IRQ 19
Port 7400-740F
Port 7800-7803
Port 8000-8007
Port 8400-8403
Port 8800-8807
[ Contrôleur IDE standard double canal PCI ]
Propriétés du périphérique :
Description du pilote Contrôleur IDE standard double canal PCI
Date du pilote 01/07/2001
Version du pilote 5.1.2600.1106
Fournisseur du pilote Microsoft
Fichier INF mshdc.inf
Ressources des périphériques:
Port FFA0-FFAF
Disques logiques
--------------------------------------------------------------------------------
Disque Type de disque Système de fichiers Taille totale Espace utilisé Espace disponible % libre Numéro de série du volume
C: Disque local NTFS 190779 Mo 11753 Mo 179026 Mo 94 % 8465-BEF5
D: Disque amovible
E: Disque amovible
F: Disque amovible
G: Disque amovible
H: Disque amovible
I: Lecteur optique
Disques physiques
--------------------------------------------------------------------------------
[ Disque nº1 - ST3200827A (186 Go) ]
Partition Type de partition Disque Offset de démarrage Taille de la partition
#1 (Active) NTFS C: 0 MB 190779 MB
Disques optiques
--------------------------------------------------------------------------------
[ _NEC DVD_RW ND-4550A ]
Propriétés du disque optique:
Description du périphérique _NEC DVD_RW ND-4550A
Fabricant NEC
Type du périphérique DVD+RW/DVD-RW/DVD-RAM
Interface ATAPI
Vitesses d'écriture:
DVD+R9 Dual Layer 8x
DVD+R 16x
DVD+RW 8x
DVD-R9 Dual Layer 6x
DVD-R 16x
DVD-RW 8x
DVD-RAM 5x
CD-R 48x
CD-RW 32x
Vitesses de lecture:
DVD-ROM 16x
CD-ROM 48x
Fabricant du périphérique:
Nom de l'entreprise NEC Corporation
Information sur le produit http://www.nec-global.com/prod/index.html
Télécharger le firmware https://www.nec.com/en/global/support/downloads/
ASPI
--------------------------------------------------------------------------------
Hôte ID LUN Type du périphérique Vendeur Modèle Rev Informations supplémentaires
00 00 00 Disque dur ST320082 7A
00 01 00 Lecteur optique _NEC DVD _RW ND-4550A
00 07 00 Carte hôte atapi
ATA
--------------------------------------------------------------------------------
[ ST3200827A (4ND2KJKJ) ]
Propriétés du périphérique ATA:
Identifiant du modèle ST3200827A
Numéro de série 4ND2KJKJ
Révision 3.AAE
Paramètres 387621 cylindres, 16 têtes, 63 secteurs par piste, 512 octets par secteur
Secteurs LBA 390721968
Tampon 8 Mo
Secteurs multiples 16
Octets ECC 4
Mode de transfert PIO maximum PIO 4
Mode de transfert UDMA maximum UDMA 5 (ATA-100)
Mode de transfert UDMA actif UDMA 5 (ATA-100)
Capacité hors formatage 190782 Mo
Fonctionnalités du périphérique ATA :
SMART Géré
Mode de sécurité Géré
Économie d'énergie Géré
Gestion de l'économie d'énergie APM Non géré
Cache en écriture Géré
Host Protected Area Géré
Power-Up In Standby Non géré
Automatic Acoustic Management Non géré
48-bit LBA Géré
Device Configuration Overlay Géré
Fabricant du périphérique ATA :
Nom de l'entreprise Seagate Technology LLC
Information sur le produit http://www.seagate.com/products
SMART
--------------------------------------------------------------------------------
[ ST3200827A (4ND2KJKJ) ]
ID Description de l'attribut Seuil Valeur Pire valeur Données État
01 Raw Read Error Rate 6 107 88 12811894 OK (la valeur est normale)
03 Spin Up Time 0 98 98 0 OK (fonctionnera toujours)
04 Start/Stop Count 20 100 100 568 OK (la valeur est normale)
05 Reallocated Sector Count 36 100 100 15 OK (la valeur est normale)
07 Seek Error Rate 30 61 57 21646115 OK (la valeur est normale)
09 Power-On Time Count 0 100 100 681 OK (fonctionnera toujours)
0A Spin Retry Count 97 100 100 0 OK (la valeur est normale)
0C Power Cycle Count 20 100 100 572 OK (la valeur est normale)
BB <spécifique au vendeur> 0 100 100 0 OK (fonctionnera toujours)
BD <spécifique au vendeur> 0 100 100 0 OK (fonctionnera toujours)
BE <spécifique au vendeur> 45 68 57 537919520 OK (la valeur est normale)
C2 Temperature 0 32 43 32 OK (fonctionnera toujours)
C3 Hardware ECC Recovered 0 63 46 78306667 OK (fonctionnera toujours)
C5 Current Pending Sector Count 0 100 100 0 OK (fonctionnera toujours)
C6 Off-Line Uncorrectable Sector Count 0 100 100 0 OK (fonctionnera toujours)
C7 Ultra ATA CRC Error Rate 0 200 200 0 OK (fonctionnera toujours)
C8 Write Error Rate 0 100 253 0 OK (fonctionnera toujours)
CA <spécifique au vendeur> 0 100 253 0 OK (fonctionnera toujours)
Réseau Windows
--------------------------------------------------------------------------------
[ Carte réseau Fast Ethernet PCI Realtek RTL8139 Family ]
Propriétés de la carte réseau:
Carte réseau Carte réseau Fast Ethernet PCI Realtek RTL8139 Family
Type d'interface Ethernet
Adresse matérielle 00-15-F2-62-E7-53
Nom de la connexion Connexion au réseau local
Vitesse de la connexion 100 Mbps
MTU 1500 octets
Obtention du bail DHCP 20/06/2008 11:13:15
Expiration du bail DHCP 21/06/2008 11:13:15
Octets reçus 39392873 (37.6 Mo)
Octets envoyés 1791405 (1.7 Mo)
Adresses de la carte:
Masque de sous-réseau 192.168.1.20 / 255.255.255.0
Passerelle 192.168.1.1
DHCP 192.168.1.1
DNS 192.168.1.1
Fabricant de la carte réseau:
Nom de l'entreprise Realtek Semiconductor Corp.
Information sur le produit http://www.realtek.com.tw/products/products1-1.aspx?lineid=1
Télécharger le pilote http://www.realtek.com.tw/downloads/downloads1-1.aspx?lineid=1
Réseau PCI/PnP
--------------------------------------------------------------------------------
Description du périphérique Type
Realtek RTL8139 PCI Fast Ethernet Adapter [A/B/C] PCI
Vidéo DirectX
--------------------------------------------------------------------------------
[ Pilote d'affichage principal ]
Propriétés du périphérique DirectDraw :
Nom du pilote DirectDraw display
Description du pilote DirectDraw Pilote d'affichage principal
Pilote matériel vga.dll
Description du matériel
Son DirectX
--------------------------------------------------------------------------------
[ Périphérique audio principal ]
Propriétés du périphérique DirectSound :
Description du périphérique Périphérique audio principal
Module du pilote
Tampons principaux 0
Taux d'échantillonnage min/max des tampons secondaires 0 / 0 Hz
Formats de son des tampons principaux Aucun(e)
Formats de son des tampons secondaires Aucun(e)
Tampons de son (total/libres) 0 / 0
Tampons de son statiques (total/libres) 0 / 0
Tampons de son streaming (total/libres) 0 / 0
Tampons de son 3D (total/libres) 0 / 0
Tampons de son 3D statiques (total/libres) 0 / 0
Tampons de son 3D streaming (total/libres) 0 / 0
Fonctionnalités du périphérique DirectSound :
Pilote certifié Non
Périphérique émulé Non
Taux d'échantillonnage précis Non géré
DirectSound3D Non géré
Creative EAX 1.0 Non géré
Creative EAX 2.0 Non géré
Creative EAX 3.0 Non géré
Musique DirectX
--------------------------------------------------------------------------------
[ Microsoft Synthesizer ]
Propriétés du périphérique DirectMusic:
Description du périphérique Microsoft Synthesizer
Type de synthétiseur Logiciels
Classe de périphérique Port de sortie
Type du périphérique User-Mode Synthesizer
Canaux audio 2
Canaux MIDI 16000
Voix 1000
Mémoire disponible Mémoire système
Fonctionnalités du périphérique DirectMusic :
Jeu d'instruments GM intégré Non
Jeu de sons Roland GS intégré Non
DirectSound Géré
Collection d'exemples DLS L1 Géré
Collection d'exemples DLS L2 Géré
Port externe MIDI Non
Taille de la mémoire DLS attachée Non
Partage de port Non géré
Effet chorus Non géré
Effet délai Non géré
Effet réverb Géré
Entrée DirectX
--------------------------------------------------------------------------------
[ Souris ]
Propriétés du périphérique DirectInput:
Description du périphérique Souris
Type du périphérique Inconnu
Sous-type du périphérique Inconnu
Axes 3
Boutons/Touches 3
Fonctionnalités du périphérique DirectInput :
Périphérique émulé Oui
Alias Device Non
Polled Device Non
Polled Data Format Non
Attack Force Feedback Non géré
Deadband Force Feedback Non géré
Fade Force Feedback Non géré
Force Feedback Non géré
Saturation Force Feedback Non géré
+/- Force Feedback Coefficients Non géré
+/- Force Feedback Saturation Non géré
[ Clavier ]
Propriétés du périphérique DirectInput:
Description du périphérique Clavier
Type du périphérique Inconnu
Sous-type du périphérique Inconnu
Boutons/Touches 128
Fonctionnalités du périphérique DirectInput :
Périphérique émulé Oui
Alias Device Non
Polled Device Non
Polled Data Format Non
Attack Force Feedback Non géré
Deadband Force Feedback Non géré
Fade Force Feedback Non géré
Force Feedback Non géré
Saturation Force Fe
ok, alors premierement, tu desinstalle tous ce que tu as installé d audio, pour ne pas qu il ya i de conflit
tu vas dans le panneau de config = ajout / suppr de programmes et tu desinstalle tout ce qui en rapport avec l audio
ensuite
tu va la
http://support.asus.com/download/download.aspx?SLanguage=fr-fr
la tu installe tes pilote "utilitaire BIOS"
ensuite "audio"
et enfin "autres"
tu vas dans le panneau de config = ajout / suppr de programmes et tu desinstalle tout ce qui en rapport avec l audio
ensuite
tu va la
http://support.asus.com/download/download.aspx?SLanguage=fr-fr
la tu installe tes pilote "utilitaire BIOS"
ensuite "audio"
et enfin "autres"
ah zut le lien n a pas marché
quand tu es sur la page
selection du produit = carte mere
selectionner une serie = socket 775
selectionner un modele = P5GD1
quand tu es sur la page
selection du produit = carte mere
selectionner une serie = socket 775
selectionner un modele = P5GD1
Please note, BIOS update is only recommended when experiencing technical difficulties with your system, And is not recommended to be performed regularly.
Moreover, due to the nature of BIOS update, there is certain level of dangers involved. BIOS update must be performed with extreme caution . During BIOS update process, your system must be maintained without interference or power loss to prevent unexpected damage.
In case of BIOS update failure, please follow instructions in your User's Manual for guidelines on BIOS recovery via CrashFree BIOS. In the event that BIOS recovery is not recoverable via CrashFree BIOS, please contact your place of purchase for further assistance on BIOS recovery.
§IL EST ECRIT CA§
Moreover, due to the nature of BIOS update, there is certain level of dangers involved. BIOS update must be performed with extreme caution . During BIOS update process, your system must be maintained without interference or power loss to prevent unexpected damage.
In case of BIOS update failure, please follow instructions in your User's Manual for guidelines on BIOS recovery via CrashFree BIOS. In the event that BIOS recovery is not recoverable via CrashFree BIOS, please contact your place of purchase for further assistance on BIOS recovery.
§IL EST ECRIT CA§
tu extrait le dossier compréssé et tu les execute un par un
bon je suis entrain de le faire, mais il y en a qu'il ne veulent pas s'executer, et un qui me donne ce qui suit :
************************************************************
************************************************************
*
* Intel(R) Matrix Storage Manager for Microsoft*
* Windows* XP*, Microsoft* Windows* 2000, and Microsoft*
* Windows* Server 2003 Installation Readme.
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information may be disclosed to
* others. Please read the Disclaimer section at the bottom
* of this document, and contact your Intel field
* representative if you would like more information.
*
************************************************************
************************************************************
************************************************************
* Intel is making no claims of usability, efficacy or
* warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained
* herein completely defines the license and use of this
* software.
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. Overview
2. System Requirements
3. Language Support
4. Determining the System Mode
5. Installing the Software
6. Verifying Installation of the Software
7. Advanced Installation Instructions
8. Identifying the Software Version Number
9. Uninstalling the Software
************************************************************
* 1. OVERVIEW
************************************************************
The Intel(R) Matrix Storage Manager is designed to provide
functionality for the following Storage Controllers:
- Intel(R) ICH7 SATA RAID Controller
- Intel(R) ICH7 SATA AHCI Controller
- Intel(R) 6300ESB SATA RAID Controller
- Intel(R) 82801FR SATA RAID Controller
- Intel(R) 82801FR SATA AHCI Controller
- Intel(R) 82801ER SATA RAID Controller
This product is available for use on systems using the
Intel(R) Pentium(R) 4 Processor with the following I/O
Controller Hub:
- Intel(R) ICH7 I/O Controller Hub
- Intel(R) 6300ESB I/O Controller Hub (ESB)
- Intel(R) 82801FR I/O Controller Hub (ICH6R)
- Intel(R) 82801ER I/O Controller Hub (ICH5R)
This product is supported on systems running on Microsoft
Windows XP, Microsoft Windows 2000, or Microsoft Windows
Server 2003 operating systems. Software installation is
flexible and fully automated.
************************************************************
* 2. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain an Intel(R) Pentium(R) 4
Processor and one of the following Intel products:
- Intel(R) ICH7 I/O Controller Hub
- Intel(R) 6300ESB I/O Controller Hub (ESB)
- Intel(R) 82801FR I/O Controller Hub (ICH6R)
- Intel(R) 82801ER I/O Controller Hub (ICH5R)
2. The system must be running on one of the following
Microsoft* operating systems:
- Windows* XP Professional
- windows XP Home Edition
- Windows 2000
- Windows 2000 Advanced Server
- Windows Server 2003
3. The system should contain at least the minimum system
memory required by the operating system.
4. The 'Intel(R) Chipset Software Installation Utility'
must be installed prior to installing the Intel(R)
Matrix Storage Manager.
************************************************************
* 3. LANGUAGE SUPPORT
************************************************************
Below is a list of the languages (and their abbreviations)
for which the Intel(R) Matrix Storage Manager software has
been localized. The language code is listed in parentheses
after each language.
chs -> Chinese (Simplified) (0804)
cht -> Chinese (Traditional) (0404)
csy -> Czech (0005)
dan -> Danish (0006)
nld -> Dutch (0013)
enu -> English (United States) (0009)
fin -> Finnish (000B)
frc -> French (Canada) (0C0C)
fra -> French (Standard) (040C)
deu -> German (0007)
ell -> Greek (0008)
hun -> Hungarian (000E)
ita -> Italian (0010)
jpn -> Japanese (0011)
kor -> Korean (0012)
nor -> Norwegian (0014)
plk -> Polish (0015)
ptb -> Portuguese (Brazil) (0416)
ptg -> Portuguese (Standard) (0816)
rus -> Russian (0019)
esp -> Spanish (000A)
sve -> Swedish (001D)
tha -> Thai (001E)
trk -> Turkish (001F)
************************************************************
* 4. DETERMINING THE SYSTEM MODE
************************************************************
To use this readme effectively, you will need to know what
mode your system is in. The easiest way to determine the
mode is to identify how the Serial ATA controller is
presented within the Device Manager. The following
procedure will guide you through determining the mode.
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Look for an entry named 'SCSI and RAID Controllers'.
If this entry is present, expand it and look for one of
the following controllers:
- 'Intel(R) ICH7 SATA RAID Controller'
If this controller is present, the system is an ICH7
system in RAID mode and no further action is required.
- 'Intel(R) 6300ESB SATA RAID Controller'
If this controller is present, the system is an ESB
system in RAID mode and no further action is required.
- 'Intel(R) 82801FR SATA RAID Controller'
If this controller is present, the system is an ICH6R
system in RAID mode and no further action is required.
- 'Intel(R) 82801ER SATA RAID Controller'
If this controller is present, the system is an ICH5R
system in RAID mode and no further action is required.
- If neither of the controllers above are shown, then
the system is not running in RAID mode and you should
continue with step 6 below.
6. Look for an entry named 'IDE ATA/ATAPI controllers'.
If this entry is present, expand it and look for one of
the following controllers:
- 'Intel(R) ICH7 SATA AHCI Controller'
If this controller is present, the system is an ICH7
system in AHCI mode and no further action is required.
- 'Intel(R) 82801FR SATA AHCI Controller'
If this controller is present, the system is an ICH6R
system in AHCI mode and no further action is required.
- If this controller is not present, then your system
is not in AHCI mode. No other modes are supported by
the Intel(R) Matrix Storage Manager software and you
should continue with step 7 below.
7. Your system does not appear to be running in RAID or
AHCI mode. If you feel that your system is running in
RAID or AHCI mode and you do not see any of the
controllers listed above, you may choose to contact
your system manufacturer or place of purchase for
assistance.
************************************************************
* 5. INSTALLING THE SOFTWARE
************************************************************
5.1 General Installation Notes
1. If you are installing the operating system on a system
configured for RAID or AHCI mode, you must pre-install
the Intel(R) Matrix Storage Manager driver using the
F6 installation method described in section 5.3.
2. The 'Intel(R) Chipset Software Installation Utility'
must be installed on the system after a supported
Microsoft* Windows* operating system has been installed.
3. To install the Intel(R) Matrix Storage Manager,
double-click on the self-extracting and self-installing
setup file and answer all prompts presented.
4. By default, all installed files (readme.txt, help, etc.)
are copied to the following path:
32-bit:
<bootdrive>\Program Files\Intel\Intel(R) Matrix Storage Manager
5.2 InstallShield* Installation from Hard Drive or CD-ROM
Note: This method is applicable to systems configured for
RAID or AHCI mode.
1. Download the Intel(R) Matrix Storage Manager setup file
and double-click to self-extract and to begin the setup
process.
2. The 'Welcome' window appears. Click on the Next button
to continue.
3. The 'Uninstallation Warning' window appears. Click on
the Next button to continue.
4. The 'Software License Agreement' window appears. If you
agree to these terms, click on the Yes button to
continue.
5. The 'Choose Destination Location' window appears.
Click on the Next button to continue.
6. The 'Select Program Folder' window appears. Click on
the Next button to continue installing the driver.
7. If the InstallShield* Wizard Complete window is shown
without a prompt to restart the system, click the Finish
button and proceed to step 8. If it is shown with a
prompt to restart the system, click 'Yes, I want to
restart my computer now.' (the default selection) and
click the Finish button. Once the system has restarted,
proceed to step 8.
8. To verify that the driver was loaded correctly, refer
to Section 6.
5.3 Pre-Installation Using the F6 Method
Note: Steps 1 and 2 can be skipped if you use the appropriate
F6 Floppy disk utility provided by Intel. This utility
can be downloaded from the following website. These
methods are applicable to systems configured for RAID
or AHCI mode.
http://downloadfinder.intel.com/scripts-df/Product_Filter.asp?ProductID=1809
1. Extract all driver files from the installation package.
See Section 7.2 for instructions on extracting the
files.
2. Create a floppy containing the iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.sys, iaStor.cat and TxtSetup.oem
files in the root directory.
3. At the beginning of the operating system setup, press F6
to install a third party SCSI or RAID driver.
4. When prompted, select 'S' to Specify Additional Device.
5. When prompted, insert the floppy disk you created in
step 2 and press Enter.
6. At this point you should be presented with a selection
for one of the following depending on you hardware
version and configuration:
- Intel(R) ICH7 SATA RAID Controller
- Intel(R) ICH7 SATA AHCI Controller
- Intel(R) 6300ESB SATA RAID Controller
- Intel(R) 82801ER SATA RAID Controller
- Intel(R) 82801FR SATA RAID Controller
- Intel(R) 82801FR SATA AHCI Controller
7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
************************************************************
* 6. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
6.1 Verifying Have Disk, F6, or Unattended Installation:
depending on your system configuration, refer to the
appropriate sub-topic below:
6.1a Systems Configured for RAID Mode:
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Expand the 'SCSI and RAID Controllers' entry
6. Right-click on 'Intel(R) ICH7 SATA RAID Controller'
This same procedure can also be used for systems using
the 'Intel(R) 82801FR SATA RAID Controller',
the 'Intel(R) 82801ER SATA RAID Controller' and
the 'Intel(R) 6300ESB SATA RAID Controller'.
7. Select 'Properties'
8. Select the 'Driver' tab
9. Select the 'Driver Details' button
10. If the 'iaStor.sys' file is displayed, then installation
was successful.
6.1b Systems Configured for AHCI Mode:
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Expand the 'IDE ATA/ATAPI controllers' entry
6. Right-click on 'Intel(R) ICH7 SATA AHCI Controller'
6. Right-click on the 'Intel(R) ICH7 SATA AHCI Controller'
7. Select 'Properties'
8. Select the 'Driver' tab
9. Select the 'Driver Details' button
10. If the 'iaStor.sys' file is displayed, then installation
was successful.
6.2 Verifying InstallShield* or 'Package for the Web'
Installations:
1. Run 'Start'
2. Find the 'Intel(R) Matrix Storage Manager'
program group
3. Select the 'Intel(R) Matrix Storage Console' entry
4. The 'Intel(R) Matrix Storage Console' application should launch
5. If this application does not launch, the Intel
Matrix Storage Manager driver was not installed
properly and setup needs to be run.
************************************************************
* 7. ADVANCED INSTALLATION INSTRUCTIONS
************************************************************
7.1 Available Setup Flags:
-? The installer presents a dialog showing
all the supported setup flags (seen here)
and their usage.
-S Silent install (no user prompts)
-B Forces a system reboot after installation
-P <path> Supplies target path when using -A flag
-A Extracts all files (does not install
driver) to <path> if -P is also
supplied; otherwise, the files are
extracted to the default location
-N Installs all components except driver
-NoGUI Installs only the driver; the Storage
Utility, Event Monitor, and Tray icon
applet are not installed.
-NoMon Disables the Event Monitor which
consists of the Disk Monitor Service and
the System Tray Icon Applet.
-NoCPL Disables the Control Panel Applet
-O <name> Allows for the customization of the
program folder name for the Intel(R)
Storage Utility, which will appear in
the Start, Programs menu.
-L<lang code> Forces a particular language install (See
Section 3 for a table mapping <lang code>
to language). There cannot be a space
between -L and <lang code>
-build Displays build information
-f2<path\name> Creates a log file in <existing path>
with <name>; this is to be used during
silent installation. There cannot be a
space between -F2 and <path\name>, and
the path must exist prior to installation
Notes: Flags and their parameters are not case-sensitive.
Flags may be supplied in any order, with the
exception of the -S and -L, which must be
supplied last. When using the -A flag, a target
path may be specified via the -P flag, and the -O,
-L, -S, and -N flags are ignored. When using the -P
or -O flags, a space is required between the flag
and the argument; when using -L and -f2, however,
there should be no space. When using the -f2 flag,
a log file name and path must be specified, and the
path must exist prior to the installation.
7.2 Use one of the following command examples to extract the
driver files from the different package types:
c:\iata_cd.exe -a -a -p c:\<path>
c:\iata_enu.exe -a -a -p c:\<path>
c:\setup.exe -a -p c:\<path>
When run, the installation process begins; simply click
through the dialogs as prompted. This will not install
the driver, it will only extract the driver files to
<path>. Once the extraction is completed, the
driver files can be found in <path>\Driver.
7.3 To install the RAID driver, as outlined in the Microsoft
document 'Deployment Guide Automating Windows NT Setup',
use the supplied TXTSETUP.OEM file included in this
package and insert the lines shown in step 7.3a and 7.3b
below into the UNATTEND.TXT file. This method is
available for Microsoft* Windows* XP, Windows 2000, and
Windows Server 2003. Before you begin, iaAhci.inf,
iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and
Txtsetup.oem files will need to be extracted from the
setup files. To extract these files, use the method
described in section 7.2 above.
7.3a Systems Configured for RAID Mode:
Note: This same procedure can be used for systems using
the 'Intel(R) 82801FR SATA RAID Controller',
the 'Intel(R) 82801ER SATA RAID Controller', and
the 'Intel(R) 6300ESB SATA RAID Controller'. Simply
replace the text within the quotation marks.
// Insert the lines below into the UNATTEND.TXT file
[MassStorageDrivers]
"Intel(R) ICH7 SATA RAID Controller" = OEM
[OEMBootFiles]
iaStor.inf
iaStor.sys
iaStor.cat
Txtsetup.oem
7.3b Systems Configured for AHCI Mode:
// Insert the lines below into the UNATTEND.TXT file
[MassStorageDrivers]
"Intel(R) ICH7 SATA AHCI Controller" = OEM
[OEMBootFiles]
iaAhci.inf
iaStor.sys
iaAhci.cat
Txtsetup.oem
************************************************************
* 8. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
8.1 Use the following steps to identify the software version
number following a Have Disk, F6, or unattended
installation.
8.1a Systems Configured for RAID Mode:
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Expand the 'SCSI and RAID Controllers' entry
6. Right-click on 'Intel(R) ICH7 SATA RAID Controller'
This same procedure can also be used for systems using
the 'Intel(R) 82801FR SATA RAID Controller',
the 'Intel(R) 82801ER SATA RAID Controller', and
the 'Intel(R) 6300ESB SATA RAID Controller'.
7. Select 'Properties'
8. Select the 'Driver' tab
9. The software version should be displayed after
'Driver Version:'
8.1b Systems Configured for AHCI Mode:
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Expand the 'IDE ATA/ATAPI controllers' entry
6. Right-click on 'Intel(R) ICH7 SATA AHCI Controller'
7. Select 'Properties'
8. Select the 'Driver' tab
9. The software version is displayed after
'Driver Version:'
8.2 Identify the software version for InstallShield* or
'Package for the Web' Installations:
1. Click 'Start'
2. Find the 'Intel(R) Matrix Storage Manager' program
group
3. Select the 'Intel Matrix Storage Console' item
4. The 'Intel Matrix Storage Console' application should be
shown, with the version shown in the splash screen. It
can also be viewed by selecting 'About' from within the
'Help' menu.
************************************************************
* 9. UNINSTALLING THE SOFTWARE
************************************************************
Removal of this software from the system will render any
Serial ATA hard drives inaccessible by the operating system;
therefore, uninstallation is not recommended. When the
system is in RAID mode, it is recommended that any data on
any RAID volumes be backed up and that the RAID volume be
deleted before uninstalling this software. It is also
recommended that the system be configured for IDE mode after
uninstalling this software. Consult the user manual for this
version of Intel(R) Matrix Storage Manager for details on
how to do this.
Use the following procedure to uninstall the software:
1. Select 'Uninstall' from the following Start Menu folder:
* Programs->Intel(R) Matrix Storage Manager
2. The uninstall program will start. Click through the
options for the uninstallation.
NOTE: This procedure assumes that the above installation
process was successful. This uninstallation procedure
is specific only to this version of the software and
the installation file included in this package.
************************************************************
* DISCLAIMER
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life sustaining applications.
************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************
* Third-party brands and names may be claimed as the
property of others.
************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
************************************************************
INTEL SOFTWARE LICENSE AGREEMENT (Alpha / Beta, Organizational Use)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.
The Software contains pre-release "alpha" or "beta" code, which may not be fully functional and which Intel Corporation ("Intel") may substantially modify in producing any "final" version of the Software. Intel can provide no assurance that it will ever produce or make generally available a "final" version of this Software.
LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. You may copy the Software onto your organization's computers for your organization's use, and you may make a reasonable number of back-up copies of the Software, subject to these conditions:
1. You may not copy, modify, rent, sell, distribute or transfer any part of the Software, except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.
2. You may not reverse engineer, decompile or disassemble the Software.
3. You may not sublicense the Software.
4. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, an enclosed "license.txt" file or other text or file.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of (90) ninety days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software, as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements, unless they are in writing and signed by an authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.
SLA-ALPHABETA-ORG.DOC/RBK/01-21-00
************************************************************
************************************************************
*
* Intel(R) Matrix Storage Manager for Microsoft*
* Windows* XP*, Microsoft* Windows* 2000, and Microsoft*
* Windows* Server 2003 Installation Readme.
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information may be disclosed to
* others. Please read the Disclaimer section at the bottom
* of this document, and contact your Intel field
* representative if you would like more information.
*
************************************************************
************************************************************
************************************************************
* Intel is making no claims of usability, efficacy or
* warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained
* herein completely defines the license and use of this
* software.
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. Overview
2. System Requirements
3. Language Support
4. Determining the System Mode
5. Installing the Software
6. Verifying Installation of the Software
7. Advanced Installation Instructions
8. Identifying the Software Version Number
9. Uninstalling the Software
************************************************************
* 1. OVERVIEW
************************************************************
The Intel(R) Matrix Storage Manager is designed to provide
functionality for the following Storage Controllers:
- Intel(R) ICH7 SATA RAID Controller
- Intel(R) ICH7 SATA AHCI Controller
- Intel(R) 6300ESB SATA RAID Controller
- Intel(R) 82801FR SATA RAID Controller
- Intel(R) 82801FR SATA AHCI Controller
- Intel(R) 82801ER SATA RAID Controller
This product is available for use on systems using the
Intel(R) Pentium(R) 4 Processor with the following I/O
Controller Hub:
- Intel(R) ICH7 I/O Controller Hub
- Intel(R) 6300ESB I/O Controller Hub (ESB)
- Intel(R) 82801FR I/O Controller Hub (ICH6R)
- Intel(R) 82801ER I/O Controller Hub (ICH5R)
This product is supported on systems running on Microsoft
Windows XP, Microsoft Windows 2000, or Microsoft Windows
Server 2003 operating systems. Software installation is
flexible and fully automated.
************************************************************
* 2. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain an Intel(R) Pentium(R) 4
Processor and one of the following Intel products:
- Intel(R) ICH7 I/O Controller Hub
- Intel(R) 6300ESB I/O Controller Hub (ESB)
- Intel(R) 82801FR I/O Controller Hub (ICH6R)
- Intel(R) 82801ER I/O Controller Hub (ICH5R)
2. The system must be running on one of the following
Microsoft* operating systems:
- Windows* XP Professional
- windows XP Home Edition
- Windows 2000
- Windows 2000 Advanced Server
- Windows Server 2003
3. The system should contain at least the minimum system
memory required by the operating system.
4. The 'Intel(R) Chipset Software Installation Utility'
must be installed prior to installing the Intel(R)
Matrix Storage Manager.
************************************************************
* 3. LANGUAGE SUPPORT
************************************************************
Below is a list of the languages (and their abbreviations)
for which the Intel(R) Matrix Storage Manager software has
been localized. The language code is listed in parentheses
after each language.
chs -> Chinese (Simplified) (0804)
cht -> Chinese (Traditional) (0404)
csy -> Czech (0005)
dan -> Danish (0006)
nld -> Dutch (0013)
enu -> English (United States) (0009)
fin -> Finnish (000B)
frc -> French (Canada) (0C0C)
fra -> French (Standard) (040C)
deu -> German (0007)
ell -> Greek (0008)
hun -> Hungarian (000E)
ita -> Italian (0010)
jpn -> Japanese (0011)
kor -> Korean (0012)
nor -> Norwegian (0014)
plk -> Polish (0015)
ptb -> Portuguese (Brazil) (0416)
ptg -> Portuguese (Standard) (0816)
rus -> Russian (0019)
esp -> Spanish (000A)
sve -> Swedish (001D)
tha -> Thai (001E)
trk -> Turkish (001F)
************************************************************
* 4. DETERMINING THE SYSTEM MODE
************************************************************
To use this readme effectively, you will need to know what
mode your system is in. The easiest way to determine the
mode is to identify how the Serial ATA controller is
presented within the Device Manager. The following
procedure will guide you through determining the mode.
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Look for an entry named 'SCSI and RAID Controllers'.
If this entry is present, expand it and look for one of
the following controllers:
- 'Intel(R) ICH7 SATA RAID Controller'
If this controller is present, the system is an ICH7
system in RAID mode and no further action is required.
- 'Intel(R) 6300ESB SATA RAID Controller'
If this controller is present, the system is an ESB
system in RAID mode and no further action is required.
- 'Intel(R) 82801FR SATA RAID Controller'
If this controller is present, the system is an ICH6R
system in RAID mode and no further action is required.
- 'Intel(R) 82801ER SATA RAID Controller'
If this controller is present, the system is an ICH5R
system in RAID mode and no further action is required.
- If neither of the controllers above are shown, then
the system is not running in RAID mode and you should
continue with step 6 below.
6. Look for an entry named 'IDE ATA/ATAPI controllers'.
If this entry is present, expand it and look for one of
the following controllers:
- 'Intel(R) ICH7 SATA AHCI Controller'
If this controller is present, the system is an ICH7
system in AHCI mode and no further action is required.
- 'Intel(R) 82801FR SATA AHCI Controller'
If this controller is present, the system is an ICH6R
system in AHCI mode and no further action is required.
- If this controller is not present, then your system
is not in AHCI mode. No other modes are supported by
the Intel(R) Matrix Storage Manager software and you
should continue with step 7 below.
7. Your system does not appear to be running in RAID or
AHCI mode. If you feel that your system is running in
RAID or AHCI mode and you do not see any of the
controllers listed above, you may choose to contact
your system manufacturer or place of purchase for
assistance.
************************************************************
* 5. INSTALLING THE SOFTWARE
************************************************************
5.1 General Installation Notes
1. If you are installing the operating system on a system
configured for RAID or AHCI mode, you must pre-install
the Intel(R) Matrix Storage Manager driver using the
F6 installation method described in section 5.3.
2. The 'Intel(R) Chipset Software Installation Utility'
must be installed on the system after a supported
Microsoft* Windows* operating system has been installed.
3. To install the Intel(R) Matrix Storage Manager,
double-click on the self-extracting and self-installing
setup file and answer all prompts presented.
4. By default, all installed files (readme.txt, help, etc.)
are copied to the following path:
32-bit:
<bootdrive>\Program Files\Intel\Intel(R) Matrix Storage Manager
5.2 InstallShield* Installation from Hard Drive or CD-ROM
Note: This method is applicable to systems configured for
RAID or AHCI mode.
1. Download the Intel(R) Matrix Storage Manager setup file
and double-click to self-extract and to begin the setup
process.
2. The 'Welcome' window appears. Click on the Next button
to continue.
3. The 'Uninstallation Warning' window appears. Click on
the Next button to continue.
4. The 'Software License Agreement' window appears. If you
agree to these terms, click on the Yes button to
continue.
5. The 'Choose Destination Location' window appears.
Click on the Next button to continue.
6. The 'Select Program Folder' window appears. Click on
the Next button to continue installing the driver.
7. If the InstallShield* Wizard Complete window is shown
without a prompt to restart the system, click the Finish
button and proceed to step 8. If it is shown with a
prompt to restart the system, click 'Yes, I want to
restart my computer now.' (the default selection) and
click the Finish button. Once the system has restarted,
proceed to step 8.
8. To verify that the driver was loaded correctly, refer
to Section 6.
5.3 Pre-Installation Using the F6 Method
Note: Steps 1 and 2 can be skipped if you use the appropriate
F6 Floppy disk utility provided by Intel. This utility
can be downloaded from the following website. These
methods are applicable to systems configured for RAID
or AHCI mode.
http://downloadfinder.intel.com/scripts-df/Product_Filter.asp?ProductID=1809
1. Extract all driver files from the installation package.
See Section 7.2 for instructions on extracting the
files.
2. Create a floppy containing the iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.sys, iaStor.cat and TxtSetup.oem
files in the root directory.
3. At the beginning of the operating system setup, press F6
to install a third party SCSI or RAID driver.
4. When prompted, select 'S' to Specify Additional Device.
5. When prompted, insert the floppy disk you created in
step 2 and press Enter.
6. At this point you should be presented with a selection
for one of the following depending on you hardware
version and configuration:
- Intel(R) ICH7 SATA RAID Controller
- Intel(R) ICH7 SATA AHCI Controller
- Intel(R) 6300ESB SATA RAID Controller
- Intel(R) 82801ER SATA RAID Controller
- Intel(R) 82801FR SATA RAID Controller
- Intel(R) 82801FR SATA AHCI Controller
7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
************************************************************
* 6. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
6.1 Verifying Have Disk, F6, or Unattended Installation:
depending on your system configuration, refer to the
appropriate sub-topic below:
6.1a Systems Configured for RAID Mode:
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Expand the 'SCSI and RAID Controllers' entry
6. Right-click on 'Intel(R) ICH7 SATA RAID Controller'
This same procedure can also be used for systems using
the 'Intel(R) 82801FR SATA RAID Controller',
the 'Intel(R) 82801ER SATA RAID Controller' and
the 'Intel(R) 6300ESB SATA RAID Controller'.
7. Select 'Properties'
8. Select the 'Driver' tab
9. Select the 'Driver Details' button
10. If the 'iaStor.sys' file is displayed, then installation
was successful.
6.1b Systems Configured for AHCI Mode:
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Expand the 'IDE ATA/ATAPI controllers' entry
6. Right-click on 'Intel(R) ICH7 SATA AHCI Controller'
6. Right-click on the 'Intel(R) ICH7 SATA AHCI Controller'
7. Select 'Properties'
8. Select the 'Driver' tab
9. Select the 'Driver Details' button
10. If the 'iaStor.sys' file is displayed, then installation
was successful.
6.2 Verifying InstallShield* or 'Package for the Web'
Installations:
1. Run 'Start'
2. Find the 'Intel(R) Matrix Storage Manager'
program group
3. Select the 'Intel(R) Matrix Storage Console' entry
4. The 'Intel(R) Matrix Storage Console' application should launch
5. If this application does not launch, the Intel
Matrix Storage Manager driver was not installed
properly and setup needs to be run.
************************************************************
* 7. ADVANCED INSTALLATION INSTRUCTIONS
************************************************************
7.1 Available Setup Flags:
-? The installer presents a dialog showing
all the supported setup flags (seen here)
and their usage.
-S Silent install (no user prompts)
-B Forces a system reboot after installation
-P <path> Supplies target path when using -A flag
-A Extracts all files (does not install
driver) to <path> if -P is also
supplied; otherwise, the files are
extracted to the default location
-N Installs all components except driver
-NoGUI Installs only the driver; the Storage
Utility, Event Monitor, and Tray icon
applet are not installed.
-NoMon Disables the Event Monitor which
consists of the Disk Monitor Service and
the System Tray Icon Applet.
-NoCPL Disables the Control Panel Applet
-O <name> Allows for the customization of the
program folder name for the Intel(R)
Storage Utility, which will appear in
the Start, Programs menu.
-L<lang code> Forces a particular language install (See
Section 3 for a table mapping <lang code>
to language). There cannot be a space
between -L and <lang code>
-build Displays build information
-f2<path\name> Creates a log file in <existing path>
with <name>; this is to be used during
silent installation. There cannot be a
space between -F2 and <path\name>, and
the path must exist prior to installation
Notes: Flags and their parameters are not case-sensitive.
Flags may be supplied in any order, with the
exception of the -S and -L, which must be
supplied last. When using the -A flag, a target
path may be specified via the -P flag, and the -O,
-L, -S, and -N flags are ignored. When using the -P
or -O flags, a space is required between the flag
and the argument; when using -L and -f2, however,
there should be no space. When using the -f2 flag,
a log file name and path must be specified, and the
path must exist prior to the installation.
7.2 Use one of the following command examples to extract the
driver files from the different package types:
c:\iata_cd.exe -a -a -p c:\<path>
c:\iata_enu.exe -a -a -p c:\<path>
c:\setup.exe -a -p c:\<path>
When run, the installation process begins; simply click
through the dialogs as prompted. This will not install
the driver, it will only extract the driver files to
<path>. Once the extraction is completed, the
driver files can be found in <path>\Driver.
7.3 To install the RAID driver, as outlined in the Microsoft
document 'Deployment Guide Automating Windows NT Setup',
use the supplied TXTSETUP.OEM file included in this
package and insert the lines shown in step 7.3a and 7.3b
below into the UNATTEND.TXT file. This method is
available for Microsoft* Windows* XP, Windows 2000, and
Windows Server 2003. Before you begin, iaAhci.inf,
iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and
Txtsetup.oem files will need to be extracted from the
setup files. To extract these files, use the method
described in section 7.2 above.
7.3a Systems Configured for RAID Mode:
Note: This same procedure can be used for systems using
the 'Intel(R) 82801FR SATA RAID Controller',
the 'Intel(R) 82801ER SATA RAID Controller', and
the 'Intel(R) 6300ESB SATA RAID Controller'. Simply
replace the text within the quotation marks.
// Insert the lines below into the UNATTEND.TXT file
[MassStorageDrivers]
"Intel(R) ICH7 SATA RAID Controller" = OEM
[OEMBootFiles]
iaStor.inf
iaStor.sys
iaStor.cat
Txtsetup.oem
7.3b Systems Configured for AHCI Mode:
// Insert the lines below into the UNATTEND.TXT file
[MassStorageDrivers]
"Intel(R) ICH7 SATA AHCI Controller" = OEM
[OEMBootFiles]
iaAhci.inf
iaStor.sys
iaAhci.cat
Txtsetup.oem
************************************************************
* 8. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
8.1 Use the following steps to identify the software version
number following a Have Disk, F6, or unattended
installation.
8.1a Systems Configured for RAID Mode:
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Expand the 'SCSI and RAID Controllers' entry
6. Right-click on 'Intel(R) ICH7 SATA RAID Controller'
This same procedure can also be used for systems using
the 'Intel(R) 82801FR SATA RAID Controller',
the 'Intel(R) 82801ER SATA RAID Controller', and
the 'Intel(R) 6300ESB SATA RAID Controller'.
7. Select 'Properties'
8. Select the 'Driver' tab
9. The software version should be displayed after
'Driver Version:'
8.1b Systems Configured for AHCI Mode:
1. Click 'Start'; select 'Settings', then 'Control Panel'
2. Double-click on the 'System' applet. You may have to
select 'Switch to Classic View' first.
3. Select the 'Hardware' tab.
4. Select the 'Device Manager' button
5. Expand the 'IDE ATA/ATAPI controllers' entry
6. Right-click on 'Intel(R) ICH7 SATA AHCI Controller'
7. Select 'Properties'
8. Select the 'Driver' tab
9. The software version is displayed after
'Driver Version:'
8.2 Identify the software version for InstallShield* or
'Package for the Web' Installations:
1. Click 'Start'
2. Find the 'Intel(R) Matrix Storage Manager' program
group
3. Select the 'Intel Matrix Storage Console' item
4. The 'Intel Matrix Storage Console' application should be
shown, with the version shown in the splash screen. It
can also be viewed by selecting 'About' from within the
'Help' menu.
************************************************************
* 9. UNINSTALLING THE SOFTWARE
************************************************************
Removal of this software from the system will render any
Serial ATA hard drives inaccessible by the operating system;
therefore, uninstallation is not recommended. When the
system is in RAID mode, it is recommended that any data on
any RAID volumes be backed up and that the RAID volume be
deleted before uninstalling this software. It is also
recommended that the system be configured for IDE mode after
uninstalling this software. Consult the user manual for this
version of Intel(R) Matrix Storage Manager for details on
how to do this.
Use the following procedure to uninstall the software:
1. Select 'Uninstall' from the following Start Menu folder:
* Programs->Intel(R) Matrix Storage Manager
2. The uninstall program will start. Click through the
options for the uninstallation.
NOTE: This procedure assumes that the above installation
process was successful. This uninstallation procedure
is specific only to this version of the software and
the installation file included in this package.
************************************************************
* DISCLAIMER
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life sustaining applications.
************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************
* Third-party brands and names may be claimed as the
property of others.
************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
************************************************************
INTEL SOFTWARE LICENSE AGREEMENT (Alpha / Beta, Organizational Use)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.
The Software contains pre-release "alpha" or "beta" code, which may not be fully functional and which Intel Corporation ("Intel") may substantially modify in producing any "final" version of the Software. Intel can provide no assurance that it will ever produce or make generally available a "final" version of this Software.
LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. You may copy the Software onto your organization's computers for your organization's use, and you may make a reasonable number of back-up copies of the Software, subject to these conditions:
1. You may not copy, modify, rent, sell, distribute or transfer any part of the Software, except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.
2. You may not reverse engineer, decompile or disassemble the Software.
3. You may not sublicense the Software.
4. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, an enclosed "license.txt" file or other text or file.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of (90) ninety days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software, as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements, unless they are in writing and signed by an authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.
SLA-ALPHABETA-ORG.DOC/RBK/01-21-00
lol!
je me doute bien moi c'est la meme chose!
je suis tres embété avec ce truc, c'est vraiment casse c....!
excuse moi de l'expression, mais alors c'est chiant!!!
alors, maintenant, que faire?
je me doute bien moi c'est la meme chose!
je suis tres embété avec ce truc, c'est vraiment casse c....!
excuse moi de l'expression, mais alors c'est chiant!!!
alors, maintenant, que faire?
tu as etein et rallumer ton pc ?
oui et rien ne change, quand je veux ecouter de la musique, ca me donne ca :
Le Lecteur Windows Media ne peut pas lire le fichier parce que le périphérique audio pose problème. Votre ordinateur ne comporte peut-être pas de périphérique audio, ce périphérique est utilisé par un autre programme ou il ne fonctionne pas correctement.
Le Lecteur Windows Media ne peut pas lire le fichier parce que le périphérique audio pose problème. Votre ordinateur ne comporte peut-être pas de périphérique audio, ce périphérique est utilisé par un autre programme ou il ne fonctionne pas correctement.
normalement, ca aurait du l installer
dans ton gestionnaire de peripherique tu as toujours un point jaune ?
si oui, clique droit, mettre a jour le pilote
dans ton gestionnaire de peripherique tu as toujours un point jaune ?
si oui, clique droit, mettre a jour le pilote
je comprend pas de trop, tu n a plus de son, mais c est sur le controleur video que ca peche
et sur le controleur audio ?
et sur le controleur audio ?
je pense a ca, je t ai pas demander si tu avait tes cd d installations windows ?
sinon tu peux passer par tes cd pour le reinstaller
sinon tu peux passer par tes cd pour le reinstaller