View original (French)

Philips VR840/39 VCR Repair

adefp Posted messages 4 Status Member -  
 poignée -
Hello,
I think I got a tape stuck in August because it seems that since that date my VCR hasn't been working very well. I put the tape in and it makes a noise, and a 2 appears on the display.
I have to press standby for the tape to come back, and I can no longer record or play
thanks to anyone
who can help me or give me advice.
Thank you very much
Configuration: Windows 2000 Internet Explorer 6.0

3 answers

  1. poignée
     
    7 September 2010
    Hello,
    I also tried the manipulations requested by Philips, but the problem is not resolved; I still have a 2 at the start of the VCR.
    1
  2. adefp Posted messages 4 Status Member
     
    Hello
    I am adefp, and I still haven't been fixed; could you please advise me?
    Thank you all.
    0
  3. adefp Posted messages 4 Status Member
     
    Hello, I still haven't been fixed; could someone give me some advice?
    Thank you
    0
    1. lvs
       
      Hello,
      I have the same problem. But on top of that, my cassette won't come out anymore. Have you found a solution?
      0
      1. adefp > lvs
         
        Hello,
        my problem is not resolved, the (2) is still displayed and I cannot save or rewind, but I asked;
        the customer service at Philips replied to me, for the cassette to PRESS, on the + button of the programs and on the stop button at the same time for a few seconds and this on the front of the VCR and not with the remote control. That's for the jammed cassette and also it’s enough to unplug the VCR for a few seconds, this may help you. Thank you, you do the buttons first maybe, and if that’s not enough you unplug afterwards. That's what PHILIPS replied to me by email,
        thank you, and happy DIY!
        0
      2. lvs > adefp
         
        Hello,
        Thank you for your response, but I had already tried these operations and it did not solve the problem.
        0