Problème avec WIndows lors de la suppression

Salut,

Mais j'obtiens une erreur au niveau de l'installation de Lilo.
Quelle erreur ? Que dit le message ?
Comment est structuré ton HD (partitions) ? Depuis Knoppix, affiche le résultat de la commande :

/sbin/fdisk -l

Peux-tu afficher ton "lilo.conf" ?

Alors voilà le résultat de fdisk -l:

[root@localhost guest]# fdisk -l

Disque /dev/sda: 164.6 Go, 164696555520 octets
255 heads, 63 sectors/track, 20023 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0f800000

Périphérique Amorce Début Fin Blocs Id Système
/dev/sda2 4864 4985 979965 82 Linux swap / Solaris
/dev/sda3 * 4986 11359 51199155 83 Linux
/dev/sda4 1 20023 160834716 5 Extended
/dev/sda5 1 4863 39061984+ 83 Linux
/dev/sda6 11360 20023 69593548+ 83 Linux

Les entrées de la table de partitions ne sont pas dans l'ordre du disque

Disque /dev/sdb: 320.0 Go, 320072933376 octets
255 heads, 63 sectors/track, 38913 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf338f338

Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 * 1 38912 312560608+ 7 HPFS/NTFS

-----------------------------------------------

Voilà maintenent le lilo.conf de Zenwalk (sda3):

# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
append="resume=/dev/sdb2 splash=silent "
boot = /dev/sda
bitmap=/boot/splash.bmp
bmp-table=234p,348p,1,4
bmp-colors=220,0,,255,220,
bmp-timer=539p,396p,220,0,
prompt
timeout = 50
# Override dangerous defaults that rewrite the partition table:
change-rules
reset
# VESA framebuffer console @ 1024x768x64k
vga = 791
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
# Windows bootable partition config begins
other = /dev/sda1
label = Windows
table = /dev/sda
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/sdb3
label = Zenwalk
initrd = /boot/initrd.splash
read-only

---------------------------------------------

Et voilà ce qui se passe lorsque je tape lilo -v:

LILO version 22.8, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2006 John Coffman
Released 19-Feb-2007 and compiled at 17:53:40 on Oct 1 2007.

Warning: LBA32 addressing assumed
Reading boot sector from /dev/sda
Warning: '/proc/partitions' does not exist, disk scan bypassed
Warning: Unable to determine video adapter in use in the present system.
Using BITMAP secondary loader
Calling map_insert_data
Mapping bitmap file /boot/splash.bmp
Warning: Video adapter does not support VESA BIOS extensions needed for
display of 256 colors. Boot loader will fall back to TEXT only operation.
Calling map_insert_file

Boot other: /dev/sda1, on /dev/sda, loader CHAIN
Fatal: open /dev/sda1: No such device or address

-----------------------------------------

Alors si vous avez des solutions, je suis preneur ^^.

NytriX.

Fait une sauvegarde de ton "lilo.conf" :

cp /etc/lilo.conf  /etc/lilo.conf.BAK

Puis édites le fichier "/etc/lilo.conf" et change la section concernant "Windows" en :

other = /dev/sdb1
label = Windows
table = /dev/sdb 

et relances "/sbin/lilo -v".

J'ai changé le fichier lilo.conf comme tu as dit:

root[/]# lilo -v
LILO version 22.8, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2006 John Coffman
Released 19-Feb-2007 and compiled at 17:53:40 on Oct 1 2007.

Warning: LBA32 addressing assumed
Reading boot sector from /dev/sda
Warning: '/proc/partitions' does not exist, disk scan bypassed
Warning: Unable to determine video adapter in use in the present system.
Using BITMAP secondary loader
Calling map_insert_data
Mapping bitmap file /boot/splash.bmp
Warning: Video adapter does not support VESA BIOS extensions needed for
display of 256 colors. Boot loader will fall back to TEXT only operation.
Calling map_insert_file

Boot other: /dev/sdb1, on /dev/sdb, loader CHAIN
Added Windows *

Boot image: /boot/vmlinuz
Mapping RAM disk /boot/initrd.splash
Added Zenwalk

Writing boot sector.
/boot/boot.0800 exists - no boot sector backup copy made.
4 warnings were issued.

----------------------------------------------------------

Je ne sais pas quoi faire, l'ordi boot toujours sur Lilo qui m'affiche plein de 99 99 99...

SI tu as des idées, n'hésites pas.

Boot other: /dev/sdb1, on /dev/sdb, loader CHAIN
Added Windows *
Bon ça déjà c'est bon signe, c'est que ton Windows a été reconnu et ajouté ;-))

Par contre l'autre Warning, je n'en ai aucune idée ;-((