AX 300 Programmer

Thank you for your help.

I will try to implement it.

Best regards.

Have a nice weekend!

Hello,

The French manual is not easy to find.

If you can't find the complete manual, here’s a summary of the instructions in French based on available sources (notably and) for programming the Digital Control Timer AX300:

Setting the clock:

Press the arrows [← →] to select "Clock" mode.
Press [SET]. Set the days (e.g.: MO for Monday, SU for every day) with [← →], then confirm with [SET].
Set the hours and minutes with [← →], confirming each step with [SET].
For seconds, adjust with [← →] and confirm with [SET].

Programming ON/OFF intervals:

Up to 20 ON/OFF programs can be configured.
Press [← →] until the screen displays "PROG 1 ON".
Press [SET]. Select the day (e.g.: MO for Monday) with [← →], then confirm with [SET].

Set the hours and minutes for "ON" with [← →], confirming with [SET].
Repeat for "PROG 1 OFF" to set the stop time.
Repeat these steps to add additional programs (e.g.: PROG 2, PROG 3, etc.).

Example: To program a turn-on at 8:15 AM and turn-off at 3:45 PM on Monday, select "PROG 1 ON", set to "MO", 8:15, then for "PROG 1 OFF", set to "MO", 3:45.

Additional features:

ON/OFF manual operation: Press [ON] or [OFF] to manually activate/deactivate.

RESET function:

Press [RESET] to reset (clears the clock and programs).

Random function:

Press [RANDOM] in setting mode to activate/deactivate the random function (avoids predictable programming).

Troubleshooting:

Frozen screen or abnormal display: Press [RESET].
Program loss while unplugged: Replace the batteries.

Programs not executing:

Check that the random function or disabling of programs is not activated.

Maintenance:

Unplug before cleaning. Do not use chemical detergents.

I hope this helps!