View original (French)

Isonix USB key

Calous18 Posted messages 4 Status Member -  
fabul Posted messages 42163 Registration date   Status Moderator Last intervention   -

Hello, I bought a Isonix USB flash drive with one USB-C side and the other USB side, I started saving my photos and everything was going well. Now neither my mobile phone nor my PC recognizes the drive. Can you help me?

Thank you


5 answers

  1.
    fabul Posted messages 42163 Registration date   Status Moderator Last intervention   6 066
     

    Hello,

    Tell more about the key, (Size)

    And create a report (With the key connected to Windows) using ChipGenius

    Note: This is a tool to extract information about USB hardware, (USB controller chip model, memory chip, etc.) It can be detected by antivirus software as a virus when it is not, I use it, nothing to worry about.

    Disable real-time protection of the antivirus while downloading, extracting everything, and running ChipGenius, or add the files to exceptions.

    https://www.cjoint.com/c/LIepeZzEuZs

    Otherwise, it's the same thing, the below version here with a password:

    https://www.usbdev.ru/files/chipgenius/

    Right-click in the ChipGenius window and then close the small information window with "Ok" (Which means the report is in the clipboard), then use Ctrl + V to paste the generated text in a next reply.

    0
  2. fabul Posted messages 42163 Registration date   Status Moderator Last intervention   6 066
     

    Hello again,

    If you can, take a screenshot of Windows Disk Management to see where the key is, if it says "No Media" on the left (I suspect it).

    Even if that's the case, it may be or is probably repairable, but we need a ChipGenius report to be able to help you with it.

    You can also take a JPG screenshot of ChipGenius, but text format works for me too; it's even easier for copying and pasting the results afterwards.

    To know the brand and model of the controller for the key especially.

    0
    1. Calous18 Posted messages 4 Status Member
       
      0
    2. Calous18 Posted messages 4 Status Member
       
      The key is the I
      0
    3. Calous18 Posted messages 4 Status Member
       
      0
  3. fabul Posted messages 42163 Registration date   Status Moderator Last intervention   6 066
     

    @Calous18 StatusMember

    And welcome to CCM

    I have redirected your thread to the appropriate forum for a USB key issue.

    0
  4. fabul Posted messages 42163 Registration date   Status Moderator Last intervention   6 066
     

    Indeed, marked No Media, so the firmware is Ko

    But we can make it Ok

    The manufacturer is ChipsBank, and it's a fairly recent drive

    Try the latest tool here in Windows to see if it detects it. If it detects it, you'll see some information in a box.

    There is a Settings button where we can modify some parameters of the drive.

    And the All Start button to reprogram the drive.

    Chipsbank CBM2199 UMPTool v7200 (2024-06-11)

    https://www.usbdev.ru/files/chipsbank/cbm2199umptool/


    -

    Otherwise, the older versions.

    For older versions than those on the other page

    https://www.usbdev.ru/files/chipsbank/cbm2099umptool/

    -

    And the APTools, to be used only as a last resort (if necessary before UMPTool)

    https://www.usbdev.ru/files/chipsbank/cbm2099aptool/

    -

    For your information, the main page offering ChipsBank tools is here

    https://www.usbdev.ru/files/chipsbank/

    0
  6. fabul Posted messages 42163 Registration date   Status Moderator Last intervention   6 066
     

    Re Hello @Calous18 StatusMember

    Have you found out if the tool or another older one on the same page (2199), or on the old page (2099) (Starting with the latest versions) detects the key?

    Have you managed to reprogram it?

    I will check it afterwards with H2testw

    https://www.commentcamarche.net/telecharger/utilitaires/11535-h2testw/

    If you have more questions, feel free to click on "Reply".

    Or let me know if it’s resolved?

    Have a nice day.

    @+

    0