1 réponse
Hello,
The DTI is used for the telephone/ADSL line.
There are 2 wires (often white/grey) as input, and there can be 2 wires, 3, or 4 wires as output if the wall sockets are served directly from the DTI.
You should send us a photo of the open DTI and specify what exactly you want to do.
--
a foreigner is a friend we haven't met yet.
The DTI is used for the telephone/ADSL line.
There are 2 wires (often white/grey) as input, and there can be 2 wires, 3, or 4 wires as output if the wall sockets are served directly from the DTI.
You should send us a photo of the open DTI and specify what exactly you want to do.
--
a foreigner is a friend we haven't met yet.
and the output to a wall socket in yellow/orange on the right (we could connect 2 additional cables in the DTI to wire 3 wall sockets) here we have a PTT298 cable, if at the end it’s an RJ45 wall socket, the yellow/orange wires will be connected to positions 4 and 5 of the socket.
because the DTI is only used for telephony/ADSL where 2 wires are sufficient, the others are not connected
How to fit the cables in?
Hello,
See here!
https://forums.commentcamarche.net/forum/affich-37398879-boitier-dti-test#p37558481
And here too!
CCM Forum - Charter - Respect for Others