Tv api has stopped working
Who can help me?
For the past two days, my 32-inch LED smart TV displays:
TV API has stopped working, then the screen goes back to Schneider,
and non-stop I can't load anything else.
Thank you.
For the past two days, my 32-inch LED smart TV displays:
TV API has stopped working, then the screen goes back to Schneider,
and non-stop I can't load anything else.
Thank you.
21 answers
- Votes
- Date
- Descending date
-
Maio68Hello, I just talked to Schneider
They are working on it because the problem is recurring. Several of us are in this situation; we need to disconnect the Wi-Fi and check TNT and try again in two or three days to see if the Wi-Fi works.-
-
Maio68@TotoHello
Unfortunately yes
They say they're working on it, but it's been 15 days and it's still the same.
Does anyone know anything else?
-
-
UngweHello,
I've been getting the same error message on a Kiano television for the past few days. -
AsiyaGood evening, same with my Continental Edison smart TV
I don't know what to do-
Maio68Hello, it's a network problem they are working on. If you have TNT, just unplug your box for a while, go into the settings to remove your internet connection, switch to TNT on the TV, and check back in a few days. That's what they told me to do, and that's what I did. Apparently, it would be the case for all smart TVs. My personal opinion is that it's been like this since they started messing around with 5G. Best regards.
-
Titou@Maio68Thank you for the info.
-
Asiya@Maio68Thank you very much for the information, I completely reset my smart TV and it seems to be back to normal!
-
-
-
Malek01Uninstall YouTube.
-
EmiHello
I confirm I had the same message on my Schneider TV. It was terrible...
Since I disabled the TV's Wi-Fi and kept only the box's Wi-Fi, the problem has been resolved. Thank you very much.-
Maio68Good evening, how did you do it? Did you disable the
wifi on the smart TV and then? I did the same and it only works with TNT. How do I set it up with your box? I have a Freebox; do I need to use a repeater? I also have a small device to receive Free on this TV, but I don’t know how to make it work. -
-
-
NathanSame, it's been going on for 2 weeks.
-
Sab02470Good evening
Same problem for 2 days...I don't know what to do anymore...if anyone has a solution, I'm all ears.
Thank you -
Lyria6624 hours after my first message, the problem returned. I stayed at least an hour with the Free service, which was great, but despite all our efforts, nothing worked. Tonight I found in the smart TV settings, then app settings, then permissions, and in storage, there is the TV API service! I disabled it and reconnected the Ethernet. And bingo, the smart TV connected normally without the bug. So tonight I was able to access Netflix and others via the Ethernet from the Free repeater. I'll keep you updated if it bugs again...
-
-
Lyria66@NathanMy TV has 2 menus. One from the remote control that adjusts the DTT and others, and one in the smart TV. You have the screen with source, mirroring, apps, and settings. You choose settings, common settings, authority, storage, and (for me) more apps. There, you will find TV API service. Disable it.
-
Nathan@Lyria66Hello, in storage I named enable voice search enable then I displayed system application and there I have
Android keyboard enabled
My application enabled
Talk backup enabled
And the rest not activated package accessibly helper..picole tts.....Google Play service....html viewer and com android sharedstorage backup up -
Nathan@Lyria66But no TV API, does it still work for you????
-
-
Anthoby79For my case, it's because I had the WiFi on my TV and on my box that were "interfering"; I disabled the WiFi on the TV and everything went back to normal.
-
NathanHello, has anyone resolved the issue? Because for me, my Continental TV shuts off as soon as I plug in the Ethernet cable and displays this message, even when I activate the Wi-Fi.
-
AmelHello,
I'm glad to find out that I'm not the only one having this issue that's been going on for several days. I realized that it wasn't my box since the storm BELLA burned out my box, which I just replaced yesterday.
I have a little trick that seems to work for now:
I keep the box on standby / I wait for the TV to restart (since it turns off and on by itself) / and during the small interval of time when the name "continental edison" disappears (but it might work for other brands too), just before the channel appears, I put the TV on standby / I wait 5 minutes / and when I turn it back on, it works (I just did it again just now).
I don't know if it will work for you, but if it can help someone, that's great. -
NathanAfter trying today with this trick, it still doesn't work. The Ethernet connections cut off the TV, and I don't know what to do anymore. I'm annoyed at the thought of having to change the TV; it's barely a year old.
-
Maio68It doesn't work at my place either. The TV hasn't worked for a year either. And for the past month, no TNT channels. Plus, the Wi-Fi doesn't work. If I turn on the Wi-Fi, it just keeps turning on and off. The remote control doesn't respond anymore and
the message "TVAPI has stopped working" appears. -
Nathan@Maio68Same for me, it's been two weeks that this has been going on.
-
-
AmandineI just called the distributor for my Continental Edison TV. There's a problem between the update from Continental Edison and the service provider, especially with Free... I have a procedure to follow, and if it doesn't work, I have a number to call: I need to disconnect all devices from the TV (box or PS4/5, Xbox, etc...). Once unplugged, I need to turn off the box or unplug it and restart it. Maybe that will work... Otherwise, I'll find out more by calling the number provided by my distributor...
My provider confirms that my TV from March 2019 is functional; it's not a problem related to a breakdown, but indeed a software update issue at Continental Edison.-
Maio68Hello, it's exactly the same thing on the Schneider smart TV. I've contacted them twice already and apparently, they're working on it, but the problem is still not resolved. I also called Free and they say they can't do anything. It's specific to the smart TV. The only solution is to disconnect the Wi-Fi and keep only the TV channels. Well, it's been going on for a month now.
-
-
Maio68@NathanYes, it's really annoying. It's been going on for almost 2 months now. What's the point of having an Amazon Prime and Netflix subscription if I can't watch anything? I called them again, and they still haven't managed to fix the problem. It started when they launched 5G.
-
Van1492@Maio68Good evening, have you found a solution to the problem?
I have a Schneider TV.
-
-
FefoHello, so the screen that keeps turning back on, you need to go to the settings and reset it with the code from the TV manual.
I found a solution: while waiting for them to fix the issue, you can share your phone's connection and then there’s no more problem. -
GuitouAny news? It's not working here...
-
NathanFrom my side, it's still not working.
-
FefoFor me, the tethering works but only with tethering; if I turn the wifi on the box back on, it starts to glitch again.
-
NathanFor my part, the TV still doesn't work, I'm even considering changing the TV
The TV works but only with TNT, what's the point of having a connected TV? -
NathanHello, has anyone found the solution? As for me, it still doesn't work
Continental TV-
-
Maio68@AbzIt has never worked on Télé Schneider since December for me.
In February, I contacted customer service again and reset everything, and since then it works. -
Laeti@Maio68I reset my TV and reinstalled the Wi-Fi. For your information, it displays "tvapi" since I changed my provider.
So, to make it work, just turn on the TV without the demo and wait; after it turns on and off several times, it stops doing that, and then I turn on my TV demo and there’s no problem.
Even after resetting the TV, this issue has persisted.
I’m going to contact customer service because, well... -
Maio68@LaetiHello
I've tried everything too
I contacted customer service several times, I even took it back to the store, but they couldn't find anything.
Then, after insisting, they still sent it for repair and after 4 weeks I got it back; I never could find out the end of the story, but anyway, it works now.
Good luck to you.
-
-
Lyria66Hello, for those who have Free, you need to go to their Free Connect app, there you will see all the devices connected via WiFi. Go to WiFi restrictions and block the Wi-Fi access to your smart TV. Unplug and replug the TV and it will work again with TNT. If it's after a new installation, you need to wait a bit (a few hours.. personally) and I was able to reconnect the smart TV via the Ethernet connection of the Free repeater.
-
-
Lyria6624 hours after my first message, the problem returned. The Free service stayed with me for an hour and nothing was done. This evening, I went to the settings of the smart TV, then to application settings and then to permissions. In storage, I found TV API service! I disabled it and reconnected the Ethernet and bingo! I'll keep you updated if it bugs again…
-
Lyria66@NathanCompletely disconnect the Ethernet cable. Then, unplug and plug the TV back in, still without the Ethernet cable. Normally, if you've blocked the Wi-Fi connection from your Free app, the TV will restart normally on TNT. Then go to the Smart TV menu, then settings, then common parameters, then authority, and for me, it was in storage, the TV-api services app. Disable it; it will disable a lot of other things. Exit and reconnect the Ethernet cable, go back to settings, select wired network. And wait, normally everything will work again without bugs. However, it's possible that when you turn off the TV, the problem will come back. You'll have to repeat the operation.
-
-
- 1
- 2
Next