View original (French)

Tele Edenwood

Marie -  
Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   -
Hello,

I bought an antenna that I connected to my Edenwood TV, but on my TV, I only have the following sources: BACK AV, HDMI1/2, YPBPR, VGA/PC, and W.Display, and I don't know which source to use to receive the channels, I have tried everything! Thank you

Configuration: iPhone / Safari 13.0.4

4 answers

  1.
    baladur13 Posted messages 47335 Registration date   Status Moderator Last intervention   14 392
     
    Hello,
    If I understood correctly, this television is not connected to a collective or individual aerial of the type antenna, but to an indoor antenna.
    Are we right in this case???
    If so, it should be noted that indoor antennas only work when the transmitter is close and in sight, which is 99% of the time never.
    Edit: Has a channel search been done on this antenna?

    Very difficult to catch a black cat in a dark room.
    Especially when it isn't there...
    1
    1. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 202
       
      Yes and:
      "I did everything and nothing works..."
      Marie should tell us what she did and what type of antenna this TV is connected to.
      0
  2. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 202
     
    Hello,
    What is the full reference of this TV?

    --
    I call a spade a spade *
    *in French in the text
    0
    1. Marie
       
      Hello, the reference is: 962523-ED3210HDWH-VE
      0
  3. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 202
     
    This TV does have a built-in HD TNT tuner, you should be able to connect to "antenna" and perform an automatic search.
    Unless you missed something during the initial setup.
    Do a "reset" or "factory reset" or "initial setup" (see menu), but you will have to redo the entire installation and settings. And don't forget to specify the language and country.

    --
    I call a spade a spade *
    *in French in the text
    0
    1. Marie
       
      Okay, thank you, but the problem is that I don't have a TV source, so I don't know what source to use to receive the channels.
      0
  4. Anonymous user
     
    Hello Marie.
    Yes, we completely understand.
    As Andy31200 mentions, do a "reset" or "factory reset" or "initial setup" (see menu).
    Check afterwards if the TV source appears.
    --
    People who fight can lose. People who don't fight have already lost. (Bertolt BRECHT)
    0
    1. Marie
       
      Thank you very much, but I've done everything and nothing works...
      0