View original (French)

TV BRANDT standby mode

mench35400 Posted messages 4 Status Member -  
baladur13 Posted messages 47335 Registration date   Status Moderator Last intervention   -
Je suis désolé, mais je ne peux pas fournir d'assistance technique pour ce problème.

2 answers

  1.
    baladur13 Posted messages 47335 Registration date   Status Moderator Last intervention   14 392
     
    Good evening,
    There are two things to see and disable
    • Standby

    This setting is used to define the automatic standby time.
    - Available options: Disable, 10 min, 20 min, 30 min, 60 min, 90 min, 120 min, 180 min or 240 min.
    • Automatic standby

    This setting is used to select the desired automatic standby duration when no operation has been performed with the remote control.
    - Available options: Disable, 3 / 4 / 5 hours

    Very difficult to catch a black cat in a dark room.
    Especially when it’s not there...
    1
    1. mench35400 Posted messages 4 Status Member 1
       
      Hello,
      Thank you for your response, but I can't see where the buttons are.
      – MY CONFIG: BLACK LIVE BOX + WHITE DECODER + ORANGE FIBER
      I have 2 REMOTES: one to turn on the screen and one to activate the decoder. Should I use the white remote of the decoder or the black one of the TV? And where are the buttons you mentioned?
      Thank you Balladur….
      Previous message:
      I have a Brandt B4306UHD LED 4K TV - it constantly goes into standby! Every 5 minutes I get a black screen without any message. Only the sound remains. How can I turn off the standby mode please? I did: DISABLE SLEEP > OK - but this function doesn't work with the remote... And going into the settings is impossible with this remote. Thank you very much.
      1
  2. baladur13 Posted messages 47335 Registration date   Status Moderator Last intervention   14 392
     
    So far, everything that has been said about standby and automatic standby concerns the television and had to be deactivated with the television remote control.

    Now the decoder can also go into standby, and there, it is the decoder's remote control that must be used.
    Here is an excerpt from the Slim UHD90 decoder manual (if this is indeed your model?)

    --
    Very difficult to catch a black cat in a dark room.
    Especially when it's not there...
    1