View original (French)

USB bus controller with yellow triangle

Solved
satronicx Posted messages 694 Status Member -  
satronicx Posted messages 694 Status Member -
Hello,
For the past few days, I've noticed a problem in my device manager where the USB bus controller has a red cross on it, which explains why none of my USB devices are being detected. I noticed this issue directly in the device manager, where I had to update each driver, and there are quite a few. Every time my PC is turned off and then turned back on, I have to perform the same operation, meaning updating the drivers again. See the screenshot below.

7 answers

  1.
    ChariduP Posted messages 5706 Registration date   Status Contributor Last intervention   2 736
     
    Hello satronicx,

    What model is your PC?
    Which version of Windows are you using?
    Are you on 32 bits or 64 bits?

    Please provide me with the identification numbers for each piece of hardware.

    HELP: Finding the identification number of a device

    Best regards,
    --
    ChariduP - Have a nice day :)
    CCM Contributor
    0
  2. satronicx Posted messages 694 Status Member 3
     
    thank you for your response,
    I am on Windows 10 64-bit
    HP Pavilion v7 PC
    0
    1. ChariduP Posted messages 5706 Registration date   Status Contributor Last intervention   2 736
       
      Give me the identification numbers for each piece of equipment.
      0
    2. satronicx Posted messages 694 Status Member 3
       
      I don't see how I violated the charter, as I am already in communication with ChariduP, who asked me questions to which I replied, and afterwards I am waiting for a response.
      0
  3. kaneagle Posted messages 86284 Registration date   Status Moderator Last intervention   14 682
     
    Hello,

    Perform a system restore and choose a date prior to the issue.

    Windows + R
    Type --> rstrui.exe and OK.

    --
    Human beings are at their best when things are at their worst.
    0
    1. satronicx Posted messages 694 Status Member 3
       
      Hello,
      thank you for your advice, but it didn't work, as the restoration points fail with every attempt
      after that I wanted to do a Windows update which also doesn't work, I've tried several attempts without success. I have the software on a USB drive for Windows 10 and I also have mini Windows Mediapart on a USB stick, what worries me about restoring my PC is losing my already installed files. I also have a complete disk image of "C" but the problem is I need to reinstall my files which I'm trying to avoid.
      Thank you for your help.
      0
    2. satronicx Posted messages 694 Status Member 3
       
      Windows update error (0x80070424)
      0
  6. kaneagle Posted messages 86284 Registration date   Status Moderator Last intervention   14 682
     
    Press Windows + R
    Type --> winver and OK

    What version is it?

    --
    Human beings are at their best when things are at their worst.
    0
    1. satronicx Posted messages 694 Status Member 3
       
      Hello
      I am still here and my problems are not yet resolved. Type --> winver and OK, it didn't help, my problem persists with my USB bus controller drivers that I have to update manually each time I restart; everything works fine until the next restart. Since Windows Update isn't working either, I'm looking for a solution for Windows 10 updates.
      0
    2. satronicx Posted messages 694 Status Member 3
       
      Windows Update error 0x80080005
      0
  7. kaneagle Posted messages 86284 Registration date   Status Moderator Last intervention   14 682
     
    Run an sfc:
    Press Windows + X
    Select --> Windows PowerShell (admin) or Command Prompt (admin)
    Type --> sfc /scannow and hit enter

    A system file check will take place.

    --
    Human beings are at their best when things are at their worst.
    0
    1. satronicx
       
      Hello
      Thank you for your response, I found the solution by reinstalling Windows 10 without erasing all my installed software, using MiniWindows 10 and the Microsoft download tool. Everything is back to normal, thank you nonetheless for your advice.
      0
      1. NANOU > satronicx
         
        Hello,
        could you please explain to me in detail what you did (I am really a beginner) because I have exactly the same problem as you with my USB ports and I am the same as you on Windows 10? Thank you.
        0
  8. satronicx Posted messages 694 Status Member 3
     
    Hello,
    my problem is still not resolved, despite several attempts and tinkering without success. However, what I did myself by messing around is as follows:
    1- go to start -> right-click on the context menu -> device manager.
    then -> right-click on the controller (yellow triangle) all the yellow triangles and do an update one by one as follows -> right-click -> update driver -> browse my computer, etc. -> choose from a list, etc... -> don't change anything on the list if you have it, and go directly to NEXT. So the driver will be updated. You need to do this for all the drivers.
    Now the problem still remains since every restart I have to redo this operation. Since my PC is constantly in standby, the problem doesn't arise because my drivers don't change.
    If you find a better solution, please let me know.
    0