View original (French)

Unsubscribe fixed line telefunken

JTIKKRN -  
baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   -
Hello,
I must have made a mistake with the Telefunken 401 HOMMY landline as it says "unsubscribed" on the phone and it can no longer receive calls nor can I make calls.
Can anyone help me?

5 answers

  1.
    baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   14 387
     
    Hello,
    I can't find the manual for your device!

    Make sure the base is properly powered...
    If the issue isn't coming from there, try this procedure extracted from another Telefunken model


    -- 
     Very difficult to catch a black cat in a dark room.
                                  Especially when it's not there...
    0
    1. JTIKKRN
       
      Thank you, but it doesn't work, I've done everything.
      0
    2. baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   14 387
       
      Is the base properly powered electrically?
      0
    3. JTIKKRN
       
      Yes
      0
  2. baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   14 387
     
    Try removing the batteries from the handset... wait 1 minute then put them back in place (be careful with the polarities)

    -- 
     Very difficult to catch a black cat in a dark room.
                                  Especially when it's not there...
    0
    1. JTIKKRN
       
      it's still not working
      0
  3. baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   14 387
     
    Do you have the manual?
    During the registration attempt you made, did everything go normally? Except that the process did not complete successfully?

    No anomalies on the device (faded writings or otherwise) that might suggest the batteries are worn out?
    -- 
     It is very difficult to catch a black cat in a dark room.
                                         Especially when it isn't there...
    0
    1. JTIKKRN
       
      There are two batteries that work well.
      0
  6. baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   14 387
     
    A priori, the handset does not seem to show any signs of weakness.
    Check again... that the electrical outlet is operational, that the power cable connected to the base is fully inserted.
    Either the base is not powered, or it is malfunctioning, or the registration procedure has not been carried out correctly.

    You did not respond regarding how the previous registration attempt went...
    This procedure must be completed within a limited time.
    Try doing it again, but to avoid timing issues, start the procedure on the handset and finish by pressing the button on the base.

    --
    It is very difficult to catch a black cat in a dark room.
     Especially when it is not there...
    0
    1. JTIKKRN Posted messages 2 Status Member
       
      The electrical socket works very well, I unplugged and plugged the socket back in and nothing works.
      0
      1. baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   14 387 > JTIKKRN Posted messages 2 Status Member
         
        Refaire la procédure comme dit juste avant (procédure sur combiné avant d'appuyer sur le bouton de la base).
        0