View original (French)

The pressure from my stylus is not detected.

Dusty__ Posted messages 2 Status Member -  
Dusty__ Posted messages 2 Status Member -
Hello,

I received my XP-Pen Artist Pro 15.6 graphic tablet two hours ago and there’s already a problem: the pressure of my stylus is not detected.
All my strokes are the same size and I can’t seem to fix that, even though everything worked fine during my first tests.

I think the problem might be related to the fact that when I saved a drawing, I typed my title while holding the Ctrl key, which resulted in:
Ctrl+m
Ctrl+c
Ctrl+f
Ctrl+l
Ctrl+y

Is it possible that one of these commands in Krita has messed something up?

Thank you for your response.

1 answer

  1.
    Darksnake_18 Posted messages 80 Status Member 16
     
    Good evening,
    Having a Wacom at home, I remember that I needed to use drivers for it to be properly recognized by the system. Do you have any drivers to install? If so, I recommend reinstalling them and then restarting your computer so that your tablet is properly supported.
    5
    1. Dusty__ Posted messages 2 Status Member
       
      Actually, I just turned the tablet off and on again after 1 hour and everything was working normally
      Thank you very much
      0