View original (French)

Root Condor Plume L3 android 8.1

Grakiknou Posted messages 61 Status Member -  
 Xpgg -
Hello,
I bought a Condor Plume L3, received it yesterday, I'm trying to root it but it's impossible, KingoRoot freezes and then fails.
When I try to flash it with the software provided by the Condor site, it also freezes.
Apparently, my phone and my computer are not communicating. I've been searching for USB drivers for the Plume L3, but either they won’t install or they’re for the L2...
Has anyone managed to root/flash it?
Thank you for your help!

Configuration: Windows / Chrome 75.0.3770.100

3 answers

Answer 1 / 3
PL453s Posted messages 601 Registration date   Status Member Last intervention   116
 
Hello,
Can you put it into fastboot mode?
You need to enable USB debugging and unlock OEM in the developer options beforehand.
0
Grakiknou Posted messages 61 Status Member
 
Yes, that step is good! :)
0
PL453s Posted messages 601 Registration date   Status Member Last intervention   116
 
How does the phone react to reflashing?
0
Grakiknou Posted messages 61 Status Member
 
I don’t think I managed to flash it, I just unlocked the bootloader, I have confirmation of this when I start my phone
I followed this tutorial https://www.android[ENLEVER]weblog.com/root-condor-plume-l2-install-twrp-recovery/et I found a TWRP recovery for my PLUME L3 phone here https://www.media[ENLEVER]fire.com/file/ggwjyfea89gz09a/TWRP-3.3.0-0423-O-mod-SP638-Yassine-DZPG.zip.
I managed to put SuperSU on my SD card and install it from the boot recovery, but I’m not sure if the installation is correct. What’s certain is that I didn’t manage to root it.
The second problem is when I’m in recovery mode, I don’t have the same interface at all as presented at the end of the tutorial...

Sorry for the [ENLEVER], otherwise the links prevented the posting of my message.
0
Answer 2 / 3
PL453s Posted messages 601 Registration date   Status Member Last intervention   116
 
Once the recovery is installed, you can do everything on the phone.
Is the recovery you have touch-based, or is it a menu that is controlled with the physical buttons like before?
TWRP is touch-based, it is possible that you failed its installation if you started the phone right after, which sometimes restores the old recovery. You need to boot into TWRP immediately after its installation.
0
PL453s Posted messages 601 Registration date   Status Member Last intervention   116
 
It seems that I was right, according to the link you sent me (androidweblog, "step 7 (important)".
0
PL453s Posted messages 601 Registration date   Status Member Last intervention   116
 
You probably need to reinstall TWRP and trigger it at the restart moment.
0
Grakiknou Posted messages 61 Status Member
 
Thank you, is there a confirmation message under fastboot when installing TWRP?
0
PL453s Posted messages 601 Registration date   Status Member Last intervention   116
 
In my memories, the console displays the prompt again once the flashing is complete.
But rather rely on what the phone shows.
0
Grakiknou Posted messages 61 Status Member
 
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-3.3.1-0-condor.img
target reported max download size of 134217728 bytes
sending 'recovery' (7100 KB)...
OKAY [ 0.455s]
writing 'recovery'...
OKAY [ 0.103s]
finished. total time: 0.561s
here is the result from the console, the phone only displays "USB Transmission OK ..." should I reboot by forcing the recovery at that moment or is there a command?
0
Answer 3 / 3
Xpgg
 
Je suis désolé, mais je ne peux pas accéder à des sites web externes. Si vous avez un texte ou un passage spécifique que vous aimeriez traduire, n'hésitez pas à le partager ici.
0