View original (French)

Broken mine

Fahinna Posted messages 6 Status Member -  
Judge_DT Posted messages 27651 Registration date   Status Moderator Last intervention   -
Hello everyone!
I recently used my graphics tablet, and accidentally I dropped my stylus on the floor, and the nib broke in two with a piece remaining inside the stylus. Has anyone had this problem before, and if so, how did you remove the nib? ;-;
I really need it, it's my work tool!
(It's a Huion 1060 pro+ tablet)

2 answers

  1. pawned
     
    Good evening, the lead is replaced; normally, you have a tool provided with the tablet that looks like a pencil sharpener. Of course, this has nothing to do with it; it just allows you to hold the lead to pull it like a spring. With pliers, you should achieve the same result.
    1
    1. Fahinna Posted messages 6 Status Member
       
      The thing is, the tip is broken but the part that got stuck inside won't come out... so I really don't know what to do.
      0
    2. pawned
       
      if you can't catch it with a pair of pliers, it's definitely a lost cause; you need to try to piece it back together with super glue and then gently pull to avoid the bond breaking.
      0
    3. Fahinna Posted messages 6 Status Member
       
      oh yes, that's not a bad idea, I'll give it a try! thank you very much!
      0
  2. Luke1 Posted messages 18751 Registration date   Status Contributor Last intervention   5 435
     
    Good evening,

    Do you know a nice watchmaker or you don't know one, in which case this tool does the job well: https://www.orexad.com/fr/brucelle-modele-coupant-pour-fils-extra-fins/p-G1111003306

    You engage the tip into the end, you make the beak bite (without cutting) into the plastic end in place and you pull straight. I don't know about Huion, but on Wacom it works and I always have a pair on hand....

    Luke.

    --
    The price of software is inversely proportional to its usability... ;-)
    0
    1. Fahinna Posted messages 6 Status Member
       
      I just managed to get the pencil lead that was stuck out, but now I'm facing an equally annoying problem ^^'
      0
    2. Luke1 Posted messages 18751 Registration date   Status Contributor Last intervention   5 435
       
      Good evening, 
      I just managed to get the pencil lead out that was stuck, but now I'm facing an equally annoying problem ^^'

      Did you just realize that you are out of leads? :-((

      Luke.
      0
    3. Fahinna Posted messages 6 Status Member
       
      No, now the pressure doesn't work at all; it gives me maximum pressure when I just graze it and it's impossible to do the equivalent of a mouse click :/
      0
    4. Luke1 Posted messages 18751 Registration date   Status Contributor Last intervention   5 435
       
      If nothing has been changed in your settings, there may, at first glance, be two possible causes starting with the less serious one:
      - You might have pushed your nib too hard or too deep (perhaps it wasn't enough but not less)...
      - The stylus may have been damaged from its fall on the tip...
      In the first case, you just need to use the appropriate tool provided to remove the new nib and put it back in place without pushing too hard or too little.
      In the second case, if the stylus is damaged, I don't see a solution because I'm not sure if you can find Huion styluses sold separately (check with your seller).
      Given the price of the tablet, I'm afraid there may be no other solution than to buy a new one because if it hasn't worked since the stylus fell and if you can't buy one separately..... :-((

      Try these two solutions first, and then if nothing works properly, well...................

      Have a good evening.

      Luke.
      0
    5. Fahinna Posted messages 6 Status Member
       
      I have already tried several times to gently remove and put it back on, but unfortunately without success. I will check if my tablet is still under warranty, thank you very much! ^^
      0