Probleme pour Graver Un DvD
Résolu
Voilà je possede Nero StartSmart, que j'utilisais souvent sans problème pour graver des CD mais aujourd'hui ou je dois impérativement gravé des DVDs ça m'est impossible :s
Le problème étant que lorsque je tente de graver le DVD impossible de mettre la gravure en route, ça reste à 1% donc bon je pense pas vous aidez trop pour que vous puissiez m'aider alors je vous envoie le log.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Version de Nero : 6.3.1.17 (Nero Express)
Graveur : <DVDRW IDE 16X> Version: A07R - HA 0 TA 1 - 6.3.1.17
Pilote d'adaptateur :<atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM : <DVDRW IDE 16X >Version: A07R - HA 0 TA 1 - 6.3.1.17
Pilote d'adaptateur :<atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 0 ID 1 DMA: On
CdRomPeripheral : AB7322E EVG557V 1.0 anmn04t9 Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE 16X D: CDRom0
AB7322E EVG557V E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 196MB (201700kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.8.2007
Graver une image DVD
22:18:31 #1 Text 0 File Reader.cpp, Line 118
Reader running
22:18:31 #2 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running
22:18:31 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 382873600
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=507:32.52 ( 2283952)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Thibault LE COZANET\Mes documents\Image.nrg>
22:18:31 #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disque entier, using DVD media
22:19:06 #5 SCSI -1033 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
22:19:39 #6 SCSI -1033 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
22:20:12 #7 SCSI -1033 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
22:20:45 #8 SCSI -1033 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
22:21:06 #9 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2283951 (507:32.51, 4460MB)
22:21:06 #10 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
22:21:06 #11 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
22:21:06 #12 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Inconnu. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R9 Double Layer.)
22:21:06 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283952 (2283952) = #2283952/507:32.52
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283952 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------
22:21:06 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4677533696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2283952 | lead-out | 1 | 0x00 | 0x41
22:21:06 #15 Phase 24 File dlgbrnst.cpp, Line 1845
Début de mise en cache des fichiers
22:21:07 #16 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
22:21:07 #17 Phase 25 File dlgbrnst.cpp, Line 1845
Cache des fichiers terminé
22:21:07 #18 Phase 36 File dlgbrnst.cpp, Line 1845
Début de gravure à 4x (5 540 Ko/s)
22:21:07 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22:21:07 #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 14:09,493 (849493ms) -> OK
22:21:07 #21 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
22:21:07 #22 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
22:21:07 #23 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
22:21:07 #24 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:21:26 #25 SCSI -1106 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03920000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
22:21:26 #26 CDR -1106 File Writer.cpp, Line 304
Erreur calibrage puissance
22:21:26 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
22:21:26 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
22:21:26 #29 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was -1
22:21:26 #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
22:21:26 #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
22:21:26 #32 Phase 38 File dlgbrnst.cpp, Line 1845
La gravure a échoué à 4x (5 540 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 05/08/2004 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Le problème étant que lorsque je tente de graver le DVD impossible de mettre la gravure en route, ça reste à 1% donc bon je pense pas vous aidez trop pour que vous puissiez m'aider alors je vous envoie le log.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Version de Nero : 6.3.1.17 (Nero Express)
Graveur : <DVDRW IDE 16X> Version: A07R - HA 0 TA 1 - 6.3.1.17
Pilote d'adaptateur :<atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM : <DVDRW IDE 16X >Version: A07R - HA 0 TA 1 - 6.3.1.17
Pilote d'adaptateur :<atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 0 ID 1 DMA: On
CdRomPeripheral : AB7322E EVG557V 1.0 anmn04t9 Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE 16X D: CDRom0
AB7322E EVG557V E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 196MB (201700kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.8.2007
Graver une image DVD
22:18:31 #1 Text 0 File Reader.cpp, Line 118
Reader running
22:18:31 #2 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running
22:18:31 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 382873600
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=507:32.52 ( 2283952)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Thibault LE COZANET\Mes documents\Image.nrg>
22:18:31 #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disque entier, using DVD media
22:19:06 #5 SCSI -1033 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
22:19:39 #6 SCSI -1033 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
22:20:12 #7 SCSI -1033 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
22:20:45 #8 SCSI -1033 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
22:21:06 #9 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2283951 (507:32.51, 4460MB)
22:21:06 #10 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
22:21:06 #11 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
22:21:06 #12 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Inconnu. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R9 Double Layer.)
22:21:06 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283952 (2283952) = #2283952/507:32.52
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283952 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------
22:21:06 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4677533696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2283952 | lead-out | 1 | 0x00 | 0x41
22:21:06 #15 Phase 24 File dlgbrnst.cpp, Line 1845
Début de mise en cache des fichiers
22:21:07 #16 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
22:21:07 #17 Phase 25 File dlgbrnst.cpp, Line 1845
Cache des fichiers terminé
22:21:07 #18 Phase 36 File dlgbrnst.cpp, Line 1845
Début de gravure à 4x (5 540 Ko/s)
22:21:07 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22:21:07 #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 14:09,493 (849493ms) -> OK
22:21:07 #21 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
22:21:07 #22 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
22:21:07 #23 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
22:21:07 #24 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:21:26 #25 SCSI -1106 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03920000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
22:21:26 #26 CDR -1106 File Writer.cpp, Line 304
Erreur calibrage puissance
22:21:26 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
22:21:26 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
22:21:26 #29 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was -1
22:21:26 #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
22:21:26 #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
22:21:26 #32 Phase 38 File dlgbrnst.cpp, Line 1845
La gravure a échoué à 4x (5 540 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 05/08/2004 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Configuration: Windows XP Firefox 2.0.0.6
4 réponses
-
Salut
Juste pour savoir qu'est ce que tu essaye de graver??? -
Bonjour
Regarde sur le site de Nero , il y a tous les tutoriels qu'il faut.
Pour Nero 6 : https://www.nero.com/eng/index.php
Pour Nero 7 : https://support.nero.com/en/support/home
Salut et bonne lecture -
ContributeurBonjour,
Pourquoi ne pas essayer d'installer la dernière mise à jour pour cette version de Nero, à savoir la 6.6.1.15a , disponible ici ? :
https://www.nero.com/eng/products/upgrade-center.php
Je te conseille de charger les packs 1 et 2.
Je vois aussi que ton disque n'est pas reconnu et qu'il y a une erreur lors du calibrage de la puissance du laser. A condition de retrouver la marque et le type de ton graveur, une mise à jour de son firmware serait peut-être indiquée.
Judex -
Merci à tous,
Je suis en train de DL les différentes mise à jour et aussi le firmware du graveur que je n'est pas de mal à retrouver.
Donc je DL tout et si ça marche pas ensuite je reviens.
Merci encore.
