Désactiver mise en veille
yann458
Messages postés
547
Statut
Membre
-
yann458 Messages postés 547 Statut Membre -
yann458 Messages postés 547 Statut Membre -
Bonjour,
J'ai récemment commander un HDD WDC Red Bulk 6 To et un boitier externe ICYBOX.
Ca fonctionne , je tourne sous debian,
mais le hic , le HDD s'arrête quand aucune opération à lieu au bout de x temps,
et dés que j'accéde à un dossier de ce HDD , la réponse est trés lente car il redemarre (sortit de mise en veille).
Et l'attente peux durer 1 minute.
Comment désactiver la mise en veille du HDD externe ??
Merci
J'ai récemment commander un HDD WDC Red Bulk 6 To et un boitier externe ICYBOX.
Ca fonctionne , je tourne sous debian,
mais le hic , le HDD s'arrête quand aucune opération à lieu au bout de x temps,
et dés que j'accéde à un dossier de ce HDD , la réponse est trés lente car il redemarre (sortit de mise en veille).
Et l'attente peux durer 1 minute.
Comment désactiver la mise en veille du HDD externe ??
Merci
A voir également:
- Désactiver mise en veille
- Desactiver rond bleu whatsapp - Guide
- Mise en veille prolongée - Guide
- Mise en forme conditionnelle excel - Guide
- Écran de veille - Guide
- Mise a jour chrome - Accueil - Applications & Logiciels
6 réponses
Salut,
Tu devrais trouver ton bonheur avec hdparm et son option -B :
Tu devrais trouver ton bonheur avec hdparm et son option -B :
-B Get/set Advanced Power Management feature, if the drive supports
Il faut que je tape cet commande "hdparm -B" à chaque démarrage de Debian ???
Pour désactiver c'est bien
hdparm -B 0 /dev/sdc ???
Pour désactiver c'est bien
hdparm -B 0 /dev/sdc ???
j'ai ça :
root@debian-w:/home/cudila# hdparm -B0 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to 0x00 (0)
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
APM_level = not supported
root@debian-w:/home/cudila# hdparm -B0 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to 0x00 (0)
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
APM_level = not supported
Mon disque dur c'est le sdb
root@debian-w:/home/cudila# hdparm -B0 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to 0x00 (0)
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
APM_level = not supported
root@debian-w:/home/cudila# hdparm -B0 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to 0x00 (0)
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
APM_level = not supported
Mon disque dur c'est le sdb
et j'ai ça avec la valeur 255
root@debian-w:/home/cudila# hdparm -B255 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to disabled
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
APM_level = not supported
root@debian-w:/home/cudila#
root@debian-w:/home/cudila# hdparm -I /dev/sdb
/dev/sdb:
ATA device, with non-removable media
Model Number: WDC WD60EFRX-68L0BN1
Serial Number: WD-WX41D75CT7YF
Firmware Revision: 82.00A82
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x001f)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors:11721045168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 5723166 MBytes
device size with M = 1000*1000: 6001175 MBytes (6001 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: 5700
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported: SMART feature set</li></ul>
Security Mode feature set Power Management feature set </li> Write cache </li> Look-ahead </li> Host Protected Area feature set </li> WRITE_BUFFER command </li> READ_BUFFER command </li> NOP cmd </li> DOWNLOAD_MICROCODE</li></ul>
Power-Up In Standby feature set SET_FEATURES required to spinup after power up</li></ul>
SET_MAX security extension 48-bit Address feature set </li> Device Configuration Overlay feature set </li> Mandatory FLUSH_CACHE </li> FLUSH_CACHE_EXT </li> SMART error logging </li> SMART self-test</li></ul>
Media Card Pass-Through General Purpose Logging feature set </li> 64-bit World wide name </li> URG for READ_STREAM[_DMA]_EXT </li> URG for WRITE_STREAM[_DMA]_EXT </li> IDLE_IMMEDIATE with UNLOAD </li> WRITE_UNCORRECTABLE_EXT command </li> {READ,WRITE}_DMA_EXT_GPL commands </li> Segmented DOWNLOAD_MICROCODE </li> Gen1 signaling speed (1.5Gb/s) </li> Gen2 signaling speed (3.0Gb/s) </li> Gen3 signaling speed (6.0Gb/s) </li> Native Command Queueing (NCQ) </li> Host-initiated interface power management </li> Phy event counters </li> Idle-Unload when NCQ is active </li> NCQ priority information </li> unknown 76[15]</li></ul>
DMA Setup Auto-Activate optimization
Device-initiated interface power management Software settings preservation </li> SMART Command Transport (SCT) feature set </li> SCT LBA Segment Access (AC2) </li> SCT Error Recovery Control (AC3) </li> SCT Features Control (AC4) </li> SCT Data Tables (AC5)</li></ul>
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific) DOWNLOAD MICROCODE DMA command </li> WRITE BUFFER DMA command </li> READ BUFFER DMA command</li></ul>
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
Logical Unit WWN Device Identifier: 50014ee004197108
NAA : 5
IEEE OUI : 0014ee
Unique ID : 004197108
Checksum: correct
root@debian-w:/home/cudila# hdparm -B255 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to disabled
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
APM_level = not supported
root@debian-w:/home/cudila#
root@debian-w:/home/cudila# hdparm -I /dev/sdb
/dev/sdb:
ATA device, with non-removable media
Model Number: WDC WD60EFRX-68L0BN1
Serial Number: WD-WX41D75CT7YF
Firmware Revision: 82.00A82
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x001f)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors:11721045168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 5723166 MBytes
device size with M = 1000*1000: 6001175 MBytes (6001 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: 5700
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported: SMART feature set</li></ul>
Security Mode feature set Power Management feature set </li> Write cache </li> Look-ahead </li> Host Protected Area feature set </li> WRITE_BUFFER command </li> READ_BUFFER command </li> NOP cmd </li> DOWNLOAD_MICROCODE</li></ul>
Power-Up In Standby feature set SET_FEATURES required to spinup after power up</li></ul>
SET_MAX security extension 48-bit Address feature set </li> Device Configuration Overlay feature set </li> Mandatory FLUSH_CACHE </li> FLUSH_CACHE_EXT </li> SMART error logging </li> SMART self-test</li></ul>
Media Card Pass-Through General Purpose Logging feature set </li> 64-bit World wide name </li> URG for READ_STREAM[_DMA]_EXT </li> URG for WRITE_STREAM[_DMA]_EXT </li> IDLE_IMMEDIATE with UNLOAD </li> WRITE_UNCORRECTABLE_EXT command </li> {READ,WRITE}_DMA_EXT_GPL commands </li> Segmented DOWNLOAD_MICROCODE </li> Gen1 signaling speed (1.5Gb/s) </li> Gen2 signaling speed (3.0Gb/s) </li> Gen3 signaling speed (6.0Gb/s) </li> Native Command Queueing (NCQ) </li> Host-initiated interface power management </li> Phy event counters </li> Idle-Unload when NCQ is active </li> NCQ priority information </li> unknown 76[15]</li></ul>
DMA Setup Auto-Activate optimization
Device-initiated interface power management Software settings preservation </li> SMART Command Transport (SCT) feature set </li> SCT LBA Segment Access (AC2) </li> SCT Error Recovery Control (AC3) </li> SCT Features Control (AC4) </li> SCT Data Tables (AC5)</li></ul>
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific) DOWNLOAD MICROCODE DMA command </li> WRITE BUFFER DMA command </li> READ BUFFER DMA command</li></ul>
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
Logical Unit WWN Device Identifier: 50014ee004197108
NAA : 5
IEEE OUI : 0014ee
Unique ID : 004197108
Checksum: correct
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Gestion d'énergie
Pour les disques qui ne le supporterait pas, comme les WesternDigital série Green, une solution de contournement est proposée ici, et une autre utilise hd-idle
