Récupération de données apres formatage

totocrenn Messages postés 10 Statut Membre -
totocrenn Messages postés 10 Statut Membre - 18 avr. 2016 à 19:58

Bonjour,
Tout d'abord je tiens à m'excuser si le sujet de la récupération de donnée après formatage à été abordé maintes et maintes fois, mais mon cas est un peu particulier.

J'avais un pc portable en dual boot :
- Windows 10 sur un ssd mSata de 120go
- Ubuntu sur mon disque dur de 500go

Il y a peu, en travaillant sur Ubuntu et en essayant de créer une clé bootable kali linux, j'ai monté l'iso sur mon ssd de 120go sans faire exprès (en faite je ne trouvais pas le chemin de ma clé donc j'en ai essayer plusieurs). Donc mon Windows a été complètement effacer ainsi que les données. De plus, Ubuntu avais son système de démarrage (Désolé je ne connais pas vraiment le jargon pro) sur le ssd, donc je ne pouvais plus accéder a aucun OS.
J'ai donc installer Linux Mint et mon Ubuntu est redevenu accessible.

Ce que je me demande c'est est ce que Mint a été installer sur le ssd ou sur le disque de 500go. Et je voudrais également savoir si il a un moyen de récupérer les données de mon ssd (qui est toujours en mode "clé bootable" je crois)

Voici ce que j'obtiens lorsque je fais un fdisk -l sur Mint :

moi@moi-GE60-2PL ~ $ sudo fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Identifiant de disque : 0x7a8a29c0

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1   *        2048   812929023   406463488    7  HPFS/NTFS/exFAT
/dev/sda2       812931070   975132671    81100801    5  Étendue
La partition 2 ne commence pas sur une frontière de cylindre physique.
/dev/sda5       812931072   816928767     1998848   82  partition d'échange Linux / Solaris
/dev/sda6       816930816   975132671    79100928   83  Linux

Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 têtes, 63 secteurs/piste, 14593 cylindres, total 234441648 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x0c7b9850

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1   *     5754880   217829375   106037248   83  Linux
/dev/sdb2       217833472   234440703     8303616   82  partition d'échange Linux / Solaris

On voit bien mon ssd (/dev/sdb) de 120go, il a 2 partition mais je ne sais pas a quoi elles correspondes.

J'ai également essayer photorec et testdisk pour récupérer les données mais je crois que je les utilise mal car je n'y parviens pas.

J'espère vraiment que quelqu'un pourra m'aider car, étant en stage à l'étranger, j'aurais bien besoin de régler ce problème rapidement.

Merci d'avance !!

Afficher la suite

A voir également:

Récupération de données apres formatage
Fuite données maif - Guide
Formatage clé usb - Guide
Formatage pc - Guide
Logiciel de récupération de données - Guide
Supprimer les données de navigation - Guide

2 réponses

Réponse 1 / 2

palace

Salut,

Ton Windows n'est plus présent sur le ssd. En revanche, tu as une partition NTFS sur le disque dur.

Fais un rapport boot-info, on y verra plus clair.

https://doc.ubuntu-fr.org/tutoriel/boot-info

totocrenn Messages postés 10 Statut Membre

Salut,

merci de cette réponse rapide, voici le rapport :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for /boot/grub and uses an embedded config file:
    
    ---------------------------------------------------------------------------
    search.fs_uuid 961139b0-83ec-4fb8-922d-bfc7f19305ac root hd1,msdos1 
    set prefix=($root)'/boot/grub'
    
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Unknown
    Boot sector info: 
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.4 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 17.3 Rosa 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb2: __________________________________________________________________________

    File system:       swsuspend
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type 'swsuspend'

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   812,929,023   812,926,976   7 NTFS / exFAT / HPFS
/dev/sda2         812,931,070   975,132,671   162,201,602   5 Extended
/dev/sda5         812,931,072   816,928,767     3,997,696  82 Linux swap / Solaris
/dev/sda6         816,930,816   975,132,671   158,201,856  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *      5,754,880   217,829,375   212,074,496  83 Linux
/dev/sdb2         217,833,472   234,440,703    16,607,232  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1                                               iso9660    Kali Live
/dev/sda5        4dfeaee7-e284-4471-8cfb-1f2cabccf4be   swap       
/dev/sda6        d98c4437-69cd-41f0-a8a9-665e22a25e97   ext4       
/dev/sdb1        961139b0-83ec-4fb8-922d-bfc7f19305ac   ext4       
/dev/sdb2        7ebf2b0b-97cb-41b0-82ea-57d97009b525   swsuspend  

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Apr 14 12:35 ata-HL-DT-ST_DVDRAM_GTA0N_KWOZ78L2704 -> ../../sr0
lrwxrwxrwx 1 root root  9 Apr 14 12:44 ata-KINGSTON_SMS200S3120G_50026B7252025439 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 14 12:35 ata-KINGSTON_SMS200S3120G_50026B7252025439-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Apr 14 12:35 ata-KINGSTON_SMS200S3120G_50026B7252025439-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 Apr 14 12:44 ata-WDC_WD5000LPVX-22V0TT0_WD-WXQ1E34HHJT5 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 14 12:35 ata-WDC_WD5000LPVX-22V0TT0_WD-WXQ1E34HHJT5-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 14 12:35 ata-WDC_WD5000LPVX-22V0TT0_WD-WXQ1E34HHJT5-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 14 12:35 ata-WDC_WD5000LPVX-22V0TT0_WD-WXQ1E34HHJT5-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 14 12:35 ata-WDC_WD5000LPVX-22V0TT0_WD-WXQ1E34HHJT5-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Apr 14 12:35 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Apr 14 12:44 wwn-0x50014ee6af4ee91a -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 14 12:35 wwn-0x50014ee6af4ee91a-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 14 12:35 wwn-0x50014ee6af4ee91a-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 14 12:35 wwn-0x50014ee6af4ee91a-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 14 12:35 wwn-0x50014ee6af4ee91a-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Apr 14 12:44 wwn-0x50026b7252025439 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 14 12:35 wwn-0x50026b7252025439-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Apr 14 12:35 wwn-0x50026b7252025439-part2 -> ../../sdb2

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda6        /                        ext4       (rw,errors=remount-ro)


=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
else
  search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
else
  search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
fi
insmod jpeg
if background_image /boot/grub/00_heroes.jpg; then
  true
else
  set menu_color_normal=white/black
  set menu_color_highlight=black/light-gray
  if background_color 44,0,30,0; then
    clear
  fi
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
 set gfxpayload="${1}"
 if [ "${1}" = "keep" ]; then
  set vt_handoff=vt.handoff=7
 else
  set vt_handoff=
 fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
 recordfail
 load_video
 gfxmode $linux_gfx_mode
 insmod gzio
 insmod part_msdos
 insmod ext2
 set root='hd0,msdos6'
 if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
 else
   search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
 fi
 linux /boot/vmlinuz-3.19.0-58-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro  quiet splash $vt_handoff
 initrd /boot/initrd.img-3.19.0-58-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
 menuentry 'Ubuntu, avec Linux 3.19.0-58-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-58-generic-advanced-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  recordfail
  load_video
  gfxmode $linux_gfx_mode
  insmod gzio
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  echo 'Chargement de Linux 3.19.0-58-generic…'
  linux /boot/vmlinuz-3.19.0-58-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro  quiet splash $vt_handoff
  echo 'Chargement du disque mémoire initial…'
  initrd /boot/initrd.img-3.19.0-58-generic
 }
 menuentry 'Ubuntu, with Linux 3.19.0-58-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-58-generic-recovery-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  recordfail
  load_video
  insmod gzio
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  echo 'Chargement de Linux 3.19.0-58-generic…'
  linux /boot/vmlinuz-3.19.0-58-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset 
  echo 'Chargement du disque mémoire initial…'
  initrd /boot/initrd.img-3.19.0-58-generic
 }
 menuentry 'Ubuntu, avec Linux 3.19.0-49-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-49-generic-advanced-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  recordfail
  load_video
  gfxmode $linux_gfx_mode
  insmod gzio
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  echo 'Chargement de Linux 3.19.0-49-generic…'
  linux /boot/vmlinuz-3.19.0-49-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro  quiet splash $vt_handoff
  echo 'Chargement du disque mémoire initial…'
  initrd /boot/initrd.img-3.19.0-49-generic
 }
 menuentry 'Ubuntu, with Linux 3.19.0-49-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-49-generic-recovery-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  recordfail
  load_video
  insmod gzio
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  echo 'Chargement de Linux 3.19.0-49-generic…'
  linux /boot/vmlinuz-3.19.0-49-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset 
  echo 'Chargement du disque mémoire initial…'
  initrd /boot/initrd.img-3.19.0-49-generic
 }
 menuentry 'Ubuntu, avec Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  recordfail
  load_video
  gfxmode $linux_gfx_mode
  insmod gzio
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  echo 'Chargement de Linux 3.19.0-25-generic…'
  linux /boot/vmlinuz-3.19.0-25-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro  quiet splash $vt_handoff
  echo 'Chargement du disque mémoire initial…'
  initrd /boot/initrd.img-3.19.0-25-generic
 }
 menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  recordfail
  load_video
  insmod gzio
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  echo 'Chargement de Linux 3.19.0-25-generic…'
  linux /boot/vmlinuz-3.19.0-25-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset 
  echo 'Chargement du disque mémoire initial…'
  initrd /boot/initrd.img-3.19.0-25-generic
 }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
 insmod part_msdos
 insmod ext2
 set root='hd0,msdos6'
 if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
 else
   search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
 fi
 knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
 insmod part_msdos
 insmod ext2
 set root='hd0,msdos6'
 if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
 else
   search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
 fi
 linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (loader) (sur /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-22549EA8549E7E6B' {
 insmod part_msdos
 insmod ntfs
 set root='hd1,msdos1'
 if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  22549EA8549E7E6B
 else
   search --no-floppy --fs-uuid --set=root 22549EA8549E7E6B
 fi
 parttool ${root} hidden-
 drivemap -s (hd0) ${root}
 chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=4dfeaee7-e284-4471-8cfb-1f2cabccf4be none            swap    sw              0       0
--------------------------------------------------------------------------------

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  961139b0-83ec-4fb8-922d-bfc7f19305ac
else
  search --no-floppy --fs-uuid --set=root 961139b0-83ec-4fb8-922d-bfc7f19305ac
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
 set gfxpayload="${1}"
 if [ "${1}" = "keep" ]; then
  set vt_handoff=vt.handoff=7
 else
  set vt_handoff=
 fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 17.3 Cinnamon 64-bit' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-961139b0-83ec-4fb8-922d-bfc7f19305ac' {
 recordfail
 load_video
 gfxmode $linux_gfx_mode
 insmod gzio
 insmod part_msdos
 insmod ext2
 set root='hd1,msdos1'
 if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  961139b0-83ec-4fb8-922d-bfc7f19305ac
 else
   search --no-floppy --fs-uuid --set=root 961139b0-83ec-4fb8-922d-bfc7f19305ac
 fi
 linux /boot/vmlinuz-3.19.0-32-generic root=UUID=961139b0-83ec-4fb8-922d-bfc7f19305ac ro  quiet splash $vt_handoff
 initrd /boot/initrd.img-3.19.0-32-generic
}
submenu 'Options avancées pour Linux Mint 17.3 Cinnamon 64-bit' $menuentry_id_option 'gnulinux-advanced-961139b0-83ec-4fb8-922d-bfc7f19305ac' {
 menuentry 'Linux Mint 17.3 Cinnamon 64-bit, avec Linux 3.19.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-32-generic-advanced-961139b0-83ec-4fb8-922d-bfc7f19305ac' {
  recordfail
  load_video
  gfxmode $linux_gfx_mode
  insmod gzio
  insmod part_msdos
  insmod ext2
  set root='hd1,msdos1'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  961139b0-83ec-4fb8-922d-bfc7f19305ac
  else
    search --no-floppy --fs-uuid --set=root 961139b0-83ec-4fb8-922d-bfc7f19305ac
  fi
  echo 'Chargement de Linux 3.19.0-32-generic…'
  linux /boot/vmlinuz-3.19.0-32-generic root=UUID=961139b0-83ec-4fb8-922d-bfc7f19305ac ro  quiet splash $vt_handoff
  echo 'Chargement du disque mémoire initial…'
  initrd /boot/initrd.img-3.19.0-32-generic
 }
 menuentry 'Linux Mint 17.3 Cinnamon 64-bit, with Linux 3.19.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-32-generic-recovery-961139b0-83ec-4fb8-922d-bfc7f19305ac' {
  recordfail
  load_video
  insmod gzio
  insmod part_msdos
  insmod ext2
  set root='hd1,msdos1'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  961139b0-83ec-4fb8-922d-bfc7f19305ac
  else
    search --no-floppy --fs-uuid --set=root 961139b0-83ec-4fb8-922d-bfc7f19305ac
  fi
  echo 'Chargement de Linux 3.19.0-32-generic…'
  linux /boot/vmlinuz-3.19.0-32-generic root=UUID=961139b0-83ec-4fb8-922d-bfc7f19305ac ro recovery nomodeset 
  echo 'Chargement du disque mémoire initial…'
  initrd /boot/initrd.img-3.19.0-32-generic
 }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
 insmod part_msdos
 insmod ext2
 set root='hd1,msdos1'
 if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  961139b0-83ec-4fb8-922d-bfc7f19305ac
 else
   search --no-floppy --fs-uuid --set=root 961139b0-83ec-4fb8-922d-bfc7f19305ac
 fi
 knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
 insmod part_msdos
 insmod ext2
 set root='hd1,msdos1'
 if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  961139b0-83ec-4fb8-922d-bfc7f19305ac
 else
   search --no-floppy --fs-uuid --set=root 961139b0-83ec-4fb8-922d-bfc7f19305ac
 fi
 linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 14.04.4 LTS (14.04) (sur /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
 insmod part_msdos
 insmod ext2
 set root='hd0,msdos6'
 if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
 else
   search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
 fi
 linux /boot/vmlinuz-3.19.0-58-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro quiet splash $vt_handoff
 initrd /boot/initrd.img-3.19.0-58-generic
}
submenu 'Options avancées pour Ubuntu 14.04.4 LTS (14.04) (sur /dev/sda6)' $menuentry_id_option 'osprober-gnulinux-advanced-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
 menuentry 'Ubuntu (sur /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-58-generic--d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  linux /boot/vmlinuz-3.19.0-58-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro quiet splash $vt_handoff
  initrd /boot/initrd.img-3.19.0-58-generic
 }
 menuentry 'Ubuntu, avec Linux 3.19.0-58-generic (sur /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-58-generic--d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  linux /boot/vmlinuz-3.19.0-58-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro quiet splash $vt_handoff
  initrd /boot/initrd.img-3.19.0-58-generic
 }
 menuentry 'Ubuntu, with Linux 3.19.0-58-generic (recovery mode) (sur /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-58-generic-root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  linux /boot/vmlinuz-3.19.0-58-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset
  initrd /boot/initrd.img-3.19.0-58-generic
 }
 menuentry 'Ubuntu, avec Linux 3.19.0-49-generic (sur /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-49-generic--d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  linux /boot/vmlinuz-3.19.0-49-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro quiet splash $vt_handoff
  initrd /boot/initrd.img-3.19.0-49-generic
 }
 menuentry 'Ubuntu, with Linux 3.19.0-49-generic (recovery mode) (sur /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-49-generic-root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  linux /boot/vmlinuz-3.19.0-49-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset
  initrd /boot/initrd.img-3.19.0-49-generic
 }
 menuentry 'Ubuntu, avec Linux 3.19.0-25-generic (sur /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-25-generic--d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  linux /boot/vmlinuz-3.19.0-25-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro quiet splash $vt_handoff
  initrd /boot/initrd.img-3.19.0-25-generic
 }
 menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode) (sur /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-25-generic-root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset-d98c4437-69cd-41f0-a8a9-665e22a25e97' {
  insmod part_msdos
  insmod ext2
  set root='hd0,msdos6'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  d98c4437-69cd-41f0-a8a9-665e22a25e97
  else
    search --no-floppy --fs-uuid --set=root d98c4437-69cd-41f0-a8a9-665e22a25e97
  fi
  linux /boot/vmlinuz-3.19.0-25-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro recovery nomodeset
  initrd /boot/initrd.img-3.19.0-25-generic
 }
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb5 during installation
UUID=961139b0-83ec-4fb8-922d-bfc7f19305ac /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdb6 during installation
UUID=7ebf2b0b-97cb-41b0-82ea-57d97009b525 none            swap    sw              0       0
--------------------------------------------------------------------------------

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda1

00000000  33 ed 90 90 90 90 90 90  90 90 90 90 90 90 90 90  |3...............|
00000010  90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90  |................|
00000020  33 ed fa 8e d5 bc 00 7c  fb fc 66 31 db 66 31 c9  |3......|..f1.f1.|
00000030  66 53 66 51 06 57 8e dd  8e c5 52 be 00 7c bf 00  |fSfQ.W....R..|..|
00000040  06 b9 00 01 f3 a5 ea 4b  06 00 00 52 b4 41 bb aa  |.......K...R.A..|
00000050  55 31 c9 30 f6 f9 cd 13  72 16 81 fb 55 aa 75 10  |U1.0....r...U.u.|
00000060  83 e1 01 74 0b 66 c7 06  f1 06 b4 42 eb 15 eb 00  |...t.f.....B....|
00000070  5a 51 b4 08 cd 13 83 e1  3f 5b 51 0f b6 c6 40 50  |ZQ......?[Q...@P|
00000080  f7 e1 53 52 50 bb 00 7c  b9 04 00 66 a1 b0 07 e8  |..SRP..|...f....|
00000090  44 00 0f 82 80 00 66 40  80 c7 02 e2 f2 66 81 3e  |D.....f@.....f.>|
000000a0  40 7c fb c0 78 70 75 09  fa bc ec 7b ea 44 7c 00  |@|..xpu....{.D|.|
000000b0  00 e8 83 00 69 73 6f 6c  69 6e 75 78 2e 62 69 6e  |....isolinux.bin|
000000c0  20 6d 69 73 73 69 6e 67  20 6f 72 20 63 6f 72 72  | missing or corr|
000000d0  75 70 74 2e 0d 0a 66 60  66 31 d2 66 03 06 f8 7b  |upt...f`f1.f...{|
000000e0  66 13 16 fc 7b 66 52 66  50 06 53 6a 01 6a 10 89  |f...{fRfP.Sj.j..|
000000f0  e6 66 f7 36 e8 7b c0 e4  06 88 e1 88 c5 92 f6 36  |.f.6.{.........6|
00000100  ee 7b 88 c6 08 e1 41 b8  01 02 8a 16 f2 7b cd 13  |.{....A......{..|
00000110  8d 64 10 66 61 c3 e8 1e  00 4f 70 65 72 61 74 69  |.d.fa....Operati|
00000120  6e 67 20 73 79 73 74 65  6d 20 6c 6f 61 64 20 65  |ng system load e|
00000130  72 72 6f 72 2e 0d 0a 5e  ac b4 0e 8a 3e 62 04 b3  |rror...^....>b..|
00000140  07 cd 10 3c 0a 75 f1 cd  18 f4 eb fd 00 00 00 00  |...<.u..........|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001b0  ac dc 02 00 00 00 00 00  50 98 7b 0c 00 00 80 02  |........P.{.....|
000001c0  01 00 17 a9 e0 ff 40 00  00 00 c0 ff 54 00 00 a9  |......@.....T...|
000001d0  e0 ff 01 a9 e0 ff 00 00  55 00 40 c8 02 00 00 00  |........U.@.....|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

Unknown BootLoader on sda2

00000000  c6 87 4f 06 25 ad db 19  a9 1a 79 9f 75 d6 a9 9f  |..O.%.....y.u...|
00000010  bf b7 50 71 b8 d8 fe 48  bb ad 3e 25 ce bb 6d 35  |..Pq...H..>%..m5|
00000020  60 4d 19 8d cf 37 1a 08  cf 7d 51 f8 90 bc f2 fb  |`M...7...}Q.....|
00000030  a6 1b bf d9 16 85 46 7a  c4 e9 76 08 d1 e2 04 98  |......Fz..v.....|
00000040  c1 a1 41 7d a8 58 80 40  10 29 56 aa 2a da 4c c5  |..A}.X.@.)V.*.L.|
00000050  34 2c 1d 1c 54 d5 a4 bb  f2 b8 94 00 b6 d3 c2 3e  |4,..T..........>|
00000060  fc 0e 34 a2 7d ca 2f ac  10 59 a2 01 18 48 a6 9e  |..4.}./..Y...H..|
00000070  e7 03 a1 40 99 a0 c3 40  16 8f 65 ee a4 e3 e3 c4  |...@...@..e.....|
00000080  95 ff 9e db d3 22 8f d3  bb ff ff ff 5f ed a1 b3  |....."......_...|
00000090  5d 58 68 a8 a3 49 3c ab  09 11 00 0c 90 64 90 43  |]Xh..I<......d.C|
000000a0  dc c3 da f3 61 55 1e 54  57 95 48 1c e5 74 ed e3  |....aU.TW.H..t..|
000000b0  fd 78 7a f3 e9 f6 bc f2  36 5f 43 fd 62 56 a8 8a  |.xz.....6_C.bV..|
000000c0  98 ae 02 18 ca 02 f9 83  33 85 55 20 3c ea 28 c8  |........3.U <.(.|
000000d0  a0 ca 8e ec a7 32 dd de  b6 66 3d 91 b5 b5 9e cf  |.....2...f=.....|
000000e0  db 72 7d fb 3a 33 22 79  3d ca 52 4b 6e 66 55 54  |.r}.:3"y=.RKnfUT|
000000f0  a7 b9 58 40 b7 54 a2 03  92 bd 61 9c fe 80 00 00  |..X@.T....a.....|
00000100  70 67 60 50 e4 13 48 c5  17 57 8a 00 94 4c d9 7f  |pg`P..H..W...L..|
00000110  c0 d5 5c 6a 65 f6 8c 10  6c a5 76 13 aa 18 b3 e8  |..\je...l.v.....|
00000120  ff fb 94 64 fa 80 53 4a  5b d8 d1 ec 12 f4 4e 63  |...d..SJ[.....Nc|
00000130  29 fa 63 2d 46 8c 61 37  61 a7 84 7c c1 24 8f 68  |).c-F.a7a..|.$.h|
00000140  59 88 36 42 52 b8 31 f9  84 8a b3 ab 31 8f a1 eb  |Y.6BR.1.....1...|
00000150  46 67 5d 77 82 b8 51 6a  cc 4c 89 9e 1c 5b ff 17  |Fg]w..Qj.L...[..|
00000160  fd 4c ba ad 6f d2 af ff  b3 fd 0a 87 0e e8 24 60  |.L..o.........$`|
00000170  54 6e 24 f0 ff 27 65 21  6e 33 dc 0e 82 0c 18 27  |Tn$..'e!n3.....'|
00000180  c1 7c ab f3 40 8c 07 9a  84 bd 54 a9 18 f7 a6 7e  |.|..@.....T....~|
00000190  ba 9b 68 2a 66 fa a6 ac  52 46 a3 46 a0 fa 62 ca  |..h*f...RF.F..b.|
000001a0  43 2e ec cc 66 33 a0 39  55 4e 57 a1 0c 67 77 64  |C...f3.9UNW..gwd|
000001b0  9c 5d c1 29 91 78 d3 2f  bf 7a 68 4d 7d 2d 00 fe  |.].).x./.zhM}-..|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 00 3d 00 00 fe  |............=...|
000001d0  ff ff 05 fe ff ff 02 00  3d 00 00 00 6e 09 00 00  |........=...n...|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

cat: write error: Broken pipe

ADDITIONAL INFORMATION :
=================== log of boot-info 2016-04-14__12h44 ===================
boot-info version : 4ppa35
boot-sav version : 4ppa35
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa35
boot-info is executed in installed-session (Ubuntu 14.04.4 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-58-generic root=UUID=d98c4437-69cd-41f0-a8a9-665e22a25e97 ro quiet splash
mount : type de système de fichiers « swsuspend » inconnu
mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount : type de système de fichiers « swsuspend » inconnu
mount -r /dev/sdb2 : Error code 32

=================== os-prober:
/dev/sda6:L'OS actuellement utilisé - Ubuntu 14.04.4 LTS CurrentSession:linux
/dev/sdb1:Linux Mint 17.3 Rosa (17.3):LinuxMint:linux

=================== blkid:
/dev/sda1: LABEL="Kali Live" TYPE="iso9660"
/dev/sda5: UUID="4dfeaee7-e284-4471-8cfb-1f2cabccf4be" TYPE="swap"
/dev/sda6: UUID="d98c4437-69cd-41f0-a8a9-665e22a25e97" TYPE="ext4"
/dev/sdb1: UUID="961139b0-83ec-4fb8-922d-bfc7f19305ac" TYPE="ext4"
/dev/sdb2: UUID="7ebf2b0b-97cb-41b0-82ea-57d97009b525" TYPE="swsuspend"


2 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

mount : type de système de fichiers « swsuspend » inconnu
mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount : type de système de fichiers « swsuspend » inconnu
mount -r /dev/sdb2 : Error code 32
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root      4096 févr.  7 07:40 grub.d
total 76
-rwxr-xr-x 1 root root  9791 déc.  17 10:00 00_header
-rwxr-xr-x 1 root root  6058 mai   13  2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin  26  2015 10_linux
-rwxr-xr-x 1 root root 10412 juin  26  2015 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  26  2015 30_os-prober
-rwxr-xr-x 1 root root  1416 juin  26  2015 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  26  2015 40_custom
-rwxr-xr-x 1 root root   216 juin  26  2015 41_custom
-rw-r--r-- 1 root root   483 juin  26  2015 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=800x600x32,800x600

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sdb1/etc/grub.d/ :
drwxr-xr-x  2 root   root     4096 avril 13 19:38 grub.d
total 92
-rwxr-xr-x 1 root root  9791 déc.  17 10:00 00_header
-rwxr-xr-x 1 root root  6058 mai   13  2015 05_debian_theme
-rwxr-xr-x 1 root root  1180 oct.  25  2014 06_mint_theme
-rwxr-xr-x 1 root root 11620 avril 13 19:38 10_linux
-rwxr-xr-x 1 root root 10634 oct.   1  2012 10_lupin
-rwxr-xr-x 1 root root 10412 juin  26  2015 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  26  2015 30_os-prober
-rwxr-xr-x 1 root root  1416 juin  26  2015 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  26  2015 40_custom
-rwxr-xr-x 1 root root   216 juin  26  2015 41_custom
-rw-r--r-- 1 root root   483 juin  26  2015 README




=================== sdb1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sdb1 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb1.
sdb2 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb2.

sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart,  not-usb, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart,  not-usb, has-os, 2048 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD5000LPVX-2 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number  Start   End    Size    Type      File system     Flags
1      1049kB  416GB  416GB   primary                   boot
2      416GB   499GB  83.0GB  extended
5      416GB   418GB  2047MB  logical   linux-swap(v1)
6      418GB   499GB  81.0GB  logical   ext4


Model: ATA KINGSTON SMS200S (scsi)
Disk /dev/sdb: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size    Type     File system  Flags
1      2946MB  112GB  109GB   primary  ext4         boot
2      112GB   120GB  8503MB  primary  swsusp

=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA WDC WD5000LPVX-2;
1:1049kB:416GB:416GB:::boot;
2:416GB:499GB:83.0GB:::;
5:416GB:418GB:2047MB:linux-swap(v1)::;
6:418GB:499GB:81.0GB:ext4::;

BYT;
/dev/sdb:120GB:scsi:512:512:msdos:ATA KINGSTON SMS200S;
1:2946MB:112GB:109GB:ext4::boot;
2:112GB:120GB:8503MB:swsusp::;

=================== lsblk:
KNAME TYPE FSTYPE      SIZE LABEL
sda   disk           465,8G
sda1  part iso9660   387,6G Kali Live
sda2  part               1K
sda5  part swap        1,9G
sda6  part ext4       75,4G
sdb   disk iso9660   111,8G Kali Live
sdb1  part ext4      101,1G
sdb2  part swsuspend   7,9G
sr0   rom             1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0
sda2     1  0  0
sda5     1  0  0         [SWAP]
sda6     1  0  0         /
sdb      0  0  0 running
sdb1     0  0  0         /mnt/boot-sav/sdb1
sdb2     0  0  0
sr0      1  0  1 running


=================== mount:
/dev/sda6 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=thomas)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 input kmsg kvm log mapper mcelog mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sdb sdb1 sdb2 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G   12K  3.9G   1% /dev
tmpfs          tmpfs     791M  1.7M  789M   1% /run
/dev/sda6      ext4       75G   14G   58G  19% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     3.9G  152K  3.9G   1% /run/shm
none           tmpfs     100M   44K  100M   1% /run/user
/dev/sdb1      ext4      100G  5.9G   89G   7% /mnt/boot-sav/sdb1

=================== fdisk -l:

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x7a8a29c0

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   812929023   406463488    7  HPFS/NTFS/exFAT
/dev/sda2       812931070   975132671    81100801    5  Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5       812931072   816928767     1998848   82  Linux swap / Solaris
/dev/sda6       816930816   975132671    79100928   83  Linux

Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0c7b9850

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *     5754880   217829375   106037248   83  Linux
/dev/sdb2       217833472   234440703     8303616   82  Linux swap / Solaris


User choice: Est-ce que sda (500GB) est un disque amovible ? no


gui-tab-other.sh: ligne 94: _checkbutton_repairfilesystems : commande introuvable


=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda6 into the MBRs of all disks (except USB without OS).
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (500GB) !

Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.4 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

J'espère que ça t'aidera a y voir plus clair

Réponse 2 / 2

jns55

Bonjour,
La commande fdisk ne nous indique pas où Mint est installé.
Démarre sur Mint, lance gparted et fais une copie d'écran des partitions de sda puis des partitions de sdb et là on verra où se trouve la racine "/"

palace

Au vu de l'historique proposé plus haut, on peut penser que Mint est sur sdb, puisque Ubuntu est déclaré fonctionnel et qu'il était, dixit Totocrenn, sur le disque dur... Sans certitude, bien entendu.

totocrenn Messages postés 10 Statut Membre

Bonjour,

Voici la capture du gparted sda :
http://hpics.li/29ce874

et sdb :
http://hpics.li/c589e92

jns55 > totocrenn Messages postés 10 Statut Membre

Mint est en sdb1, donc sur ton ssd.
Nulle trace d'une partition Windows. Par contre Kali t'a mis la pagaille sur la partition sda1 son format n'est pas reconnu.

palace

Je confirme.... Tu as même un GRUB par disque et par OS. Et comme dit jns55 la partition sda1 est mal reconnue.... Tu avais quoi là-dessus ?

On peut tenter une recherche avec testdisk...

totocrenn Messages postés 10 Statut Membre

J'ai déja tenter testdisk mais même avec des tutos j'arrive pas a bien utiliser cet utilitaire.
Pour sda1, je ne sais pas du tout ce que j'avais, la je l'ai formaté.
Mais je pense que la meilleur chose qu'il me reste a faire est de tout formaté puis tout réinstaller mais après ça plus aucune chance de récupérer mes données.

Discussions similaires

Colis shein terminal fret

code de réinitialisation de samsung GT-E1205T

Code de réinitialisation Samsung

Récupération de données apres formatage

2 réponses

Votre réponse

Discussions similaires

Newsletters