Activer 802.1X - dot1x system-auth-control
CCaMarche
Messages postés
4
Statut
Membre
-
Christr Messages postés 350 Statut Membre -
Christr Messages postés 350 Statut Membre -
SLT tt le monde et soyez nombreux a m'répondre svp !
bon! chui entr1 de mettre en place l'authentification 802.1x ds 1 reseau filaire et j'me base sur un serveur radius (IAS), un switch catalyst 2950.
lors de la configuration du switch la commande pr activer 802.1X sur le Switch "dot1x system-auth-control" ne passe pas
ki peux m'aider ?
bon! chui entr1 de mettre en place l'authentification 802.1x ds 1 reseau filaire et j'me base sur un serveur radius (IAS), un switch catalyst 2950.
lors de la configuration du switch la commande pr activer 802.1X sur le Switch "dot1x system-auth-control" ne passe pas
ki peux m'aider ?
A voir également:
- Activer 802.1X - dot1x system-auth-control
- Fan control - Télécharger - Optimisation
- Reboot system now - Guide
- Hns-accessible-system-folder ✓ - Forum Réseau
- Adb app control - Guide
- Etd control center - Forum Virus
2 réponses
le langague sms bof.
as tu activer l'authentification radius??
aaa authentification dot1x default group radius group radius
as tu activer l'authentification radius??
aaa authentification dot1x default group radius group radius
Réponse pour les autres qui bloquerais
normalement avec tous ça sa fonctionne
//Define a RADIUS server
radius-server host 10.0.0.100
radius-server key MyRadiusKey!
//Configure 802.1X to authenticate via AAA
aaa new-model
aaa authentication dot1x default group radius
//Enable 802.1X authentication globally
dot1x system-auth-control
//Static access mode
switchport mode access
//Enable 802.1X authentication per port
dot1x port-control auto
//Configure host mode (single or multi)
dot1x host-mode single-host
//Configure maximum authentication attempts
dot1x max-reauth-req
//Enable periodic reauthentication
dot1x reauthentication
//Configure a guest VLAN
dot1x guest-vlan 123
//Configure a restricted VLAN
dot1x auth-fail vlan 456
dot1x auth-fail max-attempts 3
normalement avec tous ça sa fonctionne
//Define a RADIUS server
radius-server host 10.0.0.100
radius-server key MyRadiusKey!
//Configure 802.1X to authenticate via AAA
aaa new-model
aaa authentication dot1x default group radius
//Enable 802.1X authentication globally
dot1x system-auth-control
//Static access mode
switchport mode access
//Enable 802.1X authentication per port
dot1x port-control auto
//Configure host mode (single or multi)
dot1x host-mode single-host
//Configure maximum authentication attempts
dot1x max-reauth-req
//Enable periodic reauthentication
dot1x reauthentication
//Configure a guest VLAN
dot1x guest-vlan 123
//Configure a restricted VLAN
dot1x auth-fail vlan 456
dot1x auth-fail max-attempts 3
sinn ! j'ai activé l'authentification radius avec la commande ke t'as cité et tjr le meme probleme !
merci .