HT E 5200 SAMSUNG BLU-RAY PLAYER
helenna14
Posted messages
15
Status
Member
-
Tenkris -
Tenkris -
HT E 5200 SAMSUNG Failure
When reading a DVD or watching a movie from USB, the device's source changes by itself, switching from AUX, INT, RADIO, iPod, which causes the movie to stop playing on its own and you have to re-select the movie.
Hello, I joined this forum to respond to your problem because I am experiencing the same symptoms. My solution for you or for anyone having the same issue is to remove the top cover, take off the front panel, all very easily. In fact, the problem is that the sensitive touch button in the front, probably a very sensitive cell (I'm not an electrician) must be defective and makes contact sometimes. There is a small flat brown connector about 1 cm wide in the middle on top that needs to be disconnected after lowering the tiny black holder next to it (small black bar).
This makes the front sensitive buttons non-functional, but the HT E 5200 player works perfectly (100%) with the remote control. I hope I have helped a few of you who, like me, can figure it out (I also know how to solder and I've already replaced 4 start capacitors in the power supply thanks to the internet on my 102 cm Samsung screen).
When reading a DVD or watching a movie from USB, the device's source changes by itself, switching from AUX, INT, RADIO, iPod, which causes the movie to stop playing on its own and you have to re-select the movie.
Hello, I joined this forum to respond to your problem because I am experiencing the same symptoms. My solution for you or for anyone having the same issue is to remove the top cover, take off the front panel, all very easily. In fact, the problem is that the sensitive touch button in the front, probably a very sensitive cell (I'm not an electrician) must be defective and makes contact sometimes. There is a small flat brown connector about 1 cm wide in the middle on top that needs to be disconnected after lowering the tiny black holder next to it (small black bar).
This makes the front sensitive buttons non-functional, but the HT E 5200 player works perfectly (100%) with the remote control. I hope I have helped a few of you who, like me, can figure it out (I also know how to solder and I've already replaced 4 start capacitors in the power supply thanks to the internet on my 102 cm Samsung screen).
2 answers
-
Hi,
To reply to someone, you simply need to click on "reply" in the subject line, just like I did here. -
Hi,
Great comment. Indeed, this "repair" is really VERY simple and accessible to everyone.
I have to admit that I was a bit disappointed that this problem occurred only after 2 years and a few months.
