[ECRAN] message "OSD verrouillé" ...

...when I press the "MENU" button

Hello!

I just acquired a Fujitsu-Siemens Scaleoview C19-1W, which I am using, while waiting for my CPU, plugged into our VAIO laptop..

When I want to access the menu (button on the edge of the frame), the message "OSD locked" appears.

I just read that OSD means "On Screen Display".
But how do I "unlock" this famous OSD in order to properly adjust my screen?

--
('-())KeleK
Configuration: Windows XP Firefox 2.0.0.3

6 answers

  • Votes
  • Date
  • Descending date
  1. Locking the ON/OFF button
    The ON/OFF switch can be locked to prevent accidental or unauthorised changes to the monitor
    settings.
    Press and hold both buttons 6 and 5 simultaneously for a few seconds.
    A message is displayed that the action has been performed.
    Please proceed in the same manner to release the locked ON/OFF switch again.

    To unlock your screen, simultaneously press the up arrow and down arrow.
    1. I followed what it says, namely to press and hold the 5 and 6 keys (or 4 and 5) on your screen for a few seconds, wait for the "unlock" bar to finish and release.

      And there you go, the screen is unlocked.
      1. osd verrouillé siemens
    2. it varies, no doubt depending on the screen, I am unable to switch it to normal mode. and I have tested all the advice received online. probably haven't found the right post! allowing me to carry out the appropriate manipulation.
      1. b me, I have an HP vs19x flat screen and I did this but it doesn't work, please answer me

        I'm replying, it's an HP vs19x

        Photo:
        http://www.esprinet.com/Area_Informativa/img/schede/HPC_MD_33083_EN632AA_BIG.JPG

        HELP Help, help me, I'm lost here! lol
        1. Merci, même si personne ne m'a aidé, j'ai trouvé le PBR sur les écrans HP modèles 15-17-19. Il faut appuyer sur le menu (A) pendant au moins 20 à 30 secondes et cela s'affiche.
          1. Indeed, the solution was there biggrin1.gif thank you for the link: I didn't know what the exact procedure was (I had unlocked the menu by chance).

            http://www.fujitsu-siemens.co.uk/...
            1. can someone help me
              I can't unlock my computer buttons
              when I press it says osd locked
              I have a hanns-g screen
              I've tried everything and nothing works
            2. me too hanns g! have you found out how to do it since?
            3. I have a hanns_g and I have the same problem!
            4. Good evening
              same with a Hanns-g HU196D screen --> osd locked no manipulation works and the manual doesn't provide anything on this. If anyone has the solution, I am interested.
              Thank you.