AMPLIFIER LUXMAN A 353
ALF33
Posted messages
4
Status
Member
-
fabul Posted messages 42137 Registration date Status Moderator Last intervention -
fabul Posted messages 42137 Registration date Status Moderator Last intervention -
Hello
I HAVE A LUXMAN A 353 AMPLIFIER AND FOR YEARS THERE HAS BEEN NO SOUND ON ONE CHANNEL AT STARTUP; I HAVE TO TURN UP THE VOLUME TO RESTORE NORMAL FUNCTIONING ON BOTH CHANNELS; AFTER THAT THIS AMP WORKS WONDERFULLY; COULD YOU PLEASE EXPLAIN TO ME WHERE THIS PROBLEM COMES FROM? AND WHAT TO DO TO FIX IT THANK YOU IN ADVANCE;
I HAVE A LUXMAN A 353 AMPLIFIER AND FOR YEARS THERE HAS BEEN NO SOUND ON ONE CHANNEL AT STARTUP; I HAVE TO TURN UP THE VOLUME TO RESTORE NORMAL FUNCTIONING ON BOTH CHANNELS; AFTER THAT THIS AMP WORKS WONDERFULLY; COULD YOU PLEASE EXPLAIN TO ME WHERE THIS PROBLEM COMES FROM? AND WHAT TO DO TO FIX IT THANK YOU IN ADVANCE;
1 answer
-
Hello,
The relay (the one that clicks when it turns on) must be oxidized.
It can be cleaned or replaced.
For cleaning the contacts, I use Brasso, finishing with alcohol or window cleaner.
It would be better to desolder, disassemble it for a proper cleaning, unless you can soak and dry it well inside without wetting the transformer.-
-
It probably needs to be opened for cleaning; it's not necessary to replace it.
It's easier to clean, but be careful of the wires on the sides of the coil.
I can't tell you where to find another one if needed, maybe on the Mouser website.
https://www.mouser.ca/Electromechanical/Relays/_/N-5g31 -
-
-
-