DiSEqc motor
bellodreambox
-
gil -
gil -
Hello,
I have a new DVB-S2 motor that I want to install to receive all the satellites available in my geographical location.
I am in France, in Bordeaux, and I especially want Astra, Hotbird, and Nilsat.
I have tried to install it; I can receive Astra, I turn to get Hotbird, but I can't pick up Nilsat.
How can I properly install this diseqc motor so that it receives all the satellites when it turns?
Thank you.
I have a new DVB-S2 motor that I want to install to receive all the satellites available in my geographical location.
I am in France, in Bordeaux, and I especially want Astra, Hotbird, and Nilsat.
I have tried to install it; I can receive Astra, I turn to get Hotbird, but I can't pick up Nilsat.
How can I properly install this diseqc motor so that it receives all the satellites when it turns?
Thank you.
2 réponses
http://www.dishpointer.com/
choose Bordeaux and at the bottom select the motorization HH 90 /100 or 120 depending on your motor
a line will give you the zero point of your motor which will be directed in this direction by zooming in and placing the cursor on your house
see where this line passes on the neighbors' houses to help you aim at the right zero point
set the motor in elevation as stated in the motor manual, calibrate the motor then install the dish and search for Hotbird using manual search on the decoder and save, similarly for Astra and Nile Sat by tuning into a channel and searching with slight adjustments to the motor and saving
then if you have a central satellite and not at the ends you need to adjust the azimuth of the motor
see this sketch
http://gguenin.free.fr/prati/motorise.htm
my HH is not positioned with the arm up but with the arm down so that the degrees in the manual correspond to the correct adjustment and check the sketches below for default adjustment and how to remedy it
choose Bordeaux and at the bottom select the motorization HH 90 /100 or 120 depending on your motor
a line will give you the zero point of your motor which will be directed in this direction by zooming in and placing the cursor on your house
see where this line passes on the neighbors' houses to help you aim at the right zero point
set the motor in elevation as stated in the motor manual, calibrate the motor then install the dish and search for Hotbird using manual search on the decoder and save, similarly for Astra and Nile Sat by tuning into a channel and searching with slight adjustments to the motor and saving
then if you have a central satellite and not at the ends you need to adjust the azimuth of the motor
see this sketch
http://gguenin.free.fr/prati/motorise.htm
my HH is not positioned with the arm up but with the arm down so that the degrees in the manual correspond to the correct adjustment and check the sketches below for default adjustment and how to remedy it