Ecran bleu sans arret

maryline -  
paslau35 Messages postés 8783 Statut Membre -
Bonjour,

j'ai des écrans bleu sans arret, j'ai mis à jour le pilote de la carte graphique mais sans résultat.

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Thu 28/02/2013 12:12:08 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022813-18642-01.dmp
This was probably caused by the following module: dxgkrnl.sys (dxgkrnl+0x732FD)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF880044A22FD, 0xFFFFF8800634EAA0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\dxgkrnl.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: DirectX Graphics Kernel
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Thu 28/02/2013 12:12:08 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: dxgkrnl.sys (dxgkrnl!TdrResetFromTimeout+0x16511)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF880044A22FD, 0xFFFFF8800634EAA0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\dxgkrnl.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: DirectX Graphics Kernel
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Thu 28/02/2013 11:53:12 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022813-22417-01.dmp
This was probably caused by the following module: cdd.dll (cdd+0xDD09)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF960006ADD09, 0xFFFFF8800476DF30, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\cdd.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Canonical Display Driver
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Thu 28/02/2013 11:51:26 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022813-20592-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0xA (0x30, 0x2, 0x1, 0xFFFFF80002CCE35F)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Thu 28/02/2013 09:15:33 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022813-22167-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0x1A (0x41287, 0x50, 0x0, 0x0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Thu 28/02/2013 08:51:04 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022813-48157-01.dmp
This was probably caused by the following module: rdyboost.sys (0xFFFFF880019230E5)
Bugcheck code: 0xD1 (0x5E4120C4, 0x2, 0x0, 0xFFFFF880019230E5)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\rdyboost.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: ReadyBoost Driver
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Wed 27/02/2013 06:20:06 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022713-16863-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7EFC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0x0, 0x8, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Wed 27/02/2013 06:01:00 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022713-18127-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0xB3C58)
Bugcheck code: 0x1A (0x411, 0xFFFFF6FC40050BC0, 0xA800, 0xFFFFF68000000003)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon Family
company: Advanced Micro Devices, Inc.
description: ATI Radeon Kernel Mode Driver
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, Advanced Micro Devices, Inc.).
Google query: Advanced Micro Devices, Inc. MEMORY_MANAGEMENT

On Wed 27/02/2013 05:49:56 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022713-18408-01.dmp
This was probably caused by the following module: ntfs.sys (Ntfs+0x48D8)
Bugcheck code: 0x24 (0x1904FB, 0xFFFFF88003C77330, 0xFFFFF88003C773D0, 0xFFFFF80002CC6B80)
Error: NTFS_FILE_SYSTEM
file path: C:\Windows\system32\drivers\ntfs.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote du système de fichiers NT
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Wed 27/02/2013 05:34:55 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022713-16707-01.dmp
This was probably caused by the following module: wdf01000.sys (0xFFFFF88000E3D828)
Bugcheck code: 0x50 (0xFFFFF8805A706F68, 0x1, 0xFFFFF88000E3D828, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\drivers\wdf01000.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Runtime de l'infrastructure de pilotes en mode noyau
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Tue 26/02/2013 15:37:06 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022613-16239-01.dmp
This was probably caused by the following module: rdyboost.sys (rdyboost+0x16700)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0x0, 0xFFFFF88003763978, 0xFFFFF880037631D0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\rdyboost.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: ReadyBoost Driver
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Tue 26/02/2013 15:34:26 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022613-23509-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7EFC0)
Bugcheck code: 0xA (0xFFFF8580063906D8, 0x2, 0x1, 0xFFFFF80002CD9D6C)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Tue 26/02/2013 15:32:06 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022613-24148-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7EF90)
Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Tue 26/02/2013 15:15:54 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022613-17035-01.dmp
This was probably caused by the following module: usbport.sys (USBPORT+0x14067)
Bugcheck code: 0xD1 (0x1860, 0x2, 0x1, 0xFFFFF8800448B067)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\usbport.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote de port USB 1.1 & 2.0
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Tue 26/02/2013 11:24:56 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022613-21169-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7EFC0)
Bugcheck code: 0x50 (0xFFFFF80002405100, 0x8, 0xFFFFF80002405100, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

19 réponses

Résumé de la discussion

Plusieurs plantages et écrans bleus apparaissent sous Windows 7 avec les rapports de crash alignés sur des modules graphique et système, notamment dxgkrnl.sys et ntoskrnl.exe, indiquant une erreur du pilote logiciel. La tentative de mise à jour du pilote graphique a été inefficace et les traces de crash mentionnent aussi des éléments comme cdd.dll et rdyboost.sys, ce qui oriente l’analyse vers des conflits logiciel-driver. Des hypothèses utiles émergent, incluant une possible défaillance matérielle du disque ou des malfonctionnements de mémoire, mais certains éléments pointent aussi vers des drivers tiers et des questions de configuration système. En pratique, l’analyse suggère de tester les composants critiques et les câbles, examiner les rapports de dump, et envisager des mises à jour ou réinstallations de pilotes, sans conclure sur une résolution immédiate.

Généré automatiquement par IA
sur la base des meilleures réponses
  1. Fredy1973 Messages postés 897 Statut Membre 234
     
    Bonjour,
    Essaie de faire une restauration système en appuyant sur F8 au démarrage de ton PC
    0
    1. maryline
       
      j'ai fait réparer, ça m'a proposer de restaurer mais je n'ai pas de restauration dispo avant l'apparation des problème, j'ai donc fait redemarré le pc comme suite au plantage et j'ai eut le menu d'outils de réparation ou je sais plus trop quoi ou j'ai eut restauration de windows et ça a fait un truc tout seul. Je ne sais pas si c'est bon, on va attendre voir si les écran bleu reviennent
      0
  2. Utilisateur anonyme
     
    met tes driver à jour parce que les driver irql c'est souvent ça la cause pour els autres passerait un memtest sur tes mémoires et tant qu'à faire un test de DD avec hd tune par exemple :)
    0
    1. Fredy1973 Messages postés 897 Statut Membre 234
       
      le problème, c'est qu'il na plus accès à windows (si j'ai bien compris) donc pour les mises à jour, ça va être dur^^
      0
    2. maryline
       
      si si j'ai accès a windows mais ça me fait des BSOD 4-5 fois par jour
      0
    3. maryline
       
      j'ai fait toutes les mises a jour dispo des drivers, je vais faire le memtest
      0
    4. Utilisateur anonyme
       
      même si plus accès au windows il y a des moyen comme démarrer sur un live cd et lancer le programme hdtune pour le dd par exemple.... et puis le memtest c'est un live cd aussi lol donc pas besoin accès au windows :)

      grave un hiren boot cd par exemple tu pourra alors demarrer sur un xp en live cd et de là lancer un hdtune par exemple

      et si ton pc en plante pas en live cd c'est que c'est déjà presque sur que c'est l'os :)

      mais test d'abord tes ram :)
      0
  3. maryline
     
    j'ai commencé par hd tune car plus simple que de trouvé un cd vierge ou une clé usb :)

    mais j'y comprends pas grande chose dans health j'ai un warning :
    Ultra DMA CRC Error Count : current 100 worst 99 threshold 0 data 11200

    Number of interface communication errors : 11200
    There were communication errors. This may be caused by a damaged cable.

    Le cable de branchement de mon dd est abimé ?
    0
  4. Utilisateur anonyme
     
    je partirai plus sur un prob hardware de ton disque les têtes...en gros ton dd est mourru :s

    sinon test un autre cable et autre connecteur sur ta carte mère mais j'ai des doutes....
    0
  5. Vous n’avez pas trouvé la réponse que vous recherchez ?

    Posez votre question
  6. maryline
     
    je viens de finir le memtest aucune erreur.
    Donc les écran bleu viendrais du disque dur ?

    sinon j'ai des scintillement sur l'écran souvent
    0
  7. maryline
     
    J'ai refais hd tune et je n'ai pas d'erreur par contre j'ai toujours mes écran bleus :(
    0
    1. maryline
       
      On Sat 02/03/2013 18:45:06 GMT your computer crashed
      crash dump file: C:\Windows\Minidump\030213-26176-01.dmp
      This was probably caused by the following module: cdrom.sys (0xFFFFF880013E39E9)
      Bugcheck code: 0x50 (0xFFFFFA804D15E254, 0x1, 0xFFFFF880013E39E9, 0x5)
      Error: PAGE_FAULT_IN_NONPAGED_AREA
      file path: C:\Windows\system32\drivers\cdrom.sys
      product: Microsoft® Windows® Operating System
      company: Microsoft Corporation
      description: SCSI CD-ROM Driver
      Bug check description: This indicates that invalid system memory has been referenced.
      This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
      The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



      On Sat 02/03/2013 18:45:06 GMT your computer crashed
      crash dump file: C:\Windows\memory.dmp
      This was probably caused by the following module: cdrom.sys (cdrom+0x1F9E9)
      Bugcheck code: 0x50 (0xFFFFFA804D15E254, 0x1, 0xFFFFF880013E39E9, 0x5)
      Error: PAGE_FAULT_IN_NONPAGED_AREA
      file path: C:\Windows\system32\drivers\cdrom.sys
      product: Microsoft® Windows® Operating System
      company: Microsoft Corporation
      description: SCSI CD-ROM Driver
      Bug check description: This indicates that invalid system memory has been referenced.
      This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
      The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
      0
  8. noel1950 Messages postés 15 Date d'inscription   Statut Membre Dernière intervention  
     
    Bonjour, regarde mon post avec même sujet moi ça a marché.
    0
  9. paslau35 Messages postés 8783 Statut Membre 699
     
    bjr

    aux début ça parler de diectx
    ton dernier parle de drives de ton CD-rom

    je pense que ton pc et bien malade et
    une réinstalle complète s impose
    comme ça tu serra fixe

    tu a quoi comme protection sur ce pc ,,,,,,,,,,,
    0
    1. maryline
       
      j'ai avira
      0
  10. noel1950 Messages postés 15 Date d'inscription   Statut Membre Dernière intervention  
     
    Mais non de nombreuses personnes ont le même problème suite à une mise à jour de microsoft
    0
  11. vieu bison boiteu Messages postés 44334 Date d'inscription   Statut Contributeur Dernière intervention   Ambassadeur 3 591
     
    salut maryline

    dans Ordinateur ( ou Poste de travail ) , tu cliques "droit" sur le disque "C:\" => Propriétés => Outils => Vérification des erreurs => Vérifier maintenant => tu coches les deux cases => Redémarrer

    il y aura un écran bleu de scanne pendant 10 à 30 mn suivant le volume
    ( jusqu'à 2 heures et plus pour un volume de 1 To )

    à+
    0
    1. maryline
       
      Je l'avais déja mais je l'ai tout de même refait mais pas d'erreur
      0
  12. vieu bison boiteu Messages postés 44334 Date d'inscription   Statut Contributeur Dernière intervention   Ambassadeur 3 591
     
    dxgkrnl.sys = > directX
    met à jour directX , tu télécharges et tu exécutes
    http://www.microsoft.com/fr-fr/download/details.aspx?id=35

    usbport.sys = tu as Windows XP ???
    0
    1. maryline
       
      non windows 7
      0
    2. maryline
       
      sinon j'ai mis mon pc en mode sans echec, j'ai lancé l'antivirus, et 4 h après je suis revenu, ct toujours allumé, j'ai cliqué sur réparé j'ai attendu un peu et j'ai eut un écran bleu
      0
    3. vieu bison boiteu Messages postés 44334 Date d'inscription   Statut Contributeur Dernière intervention   3 591
       
      le contrôle directX n'a rien dit
      il s'est réalisé ???

      pour la réparation
      essaie de voir par Démarrer -> Exécuter (ou Rechercher) , et taper ChkDsk /f /r
      et valider
      il y a deux espaces
      0
    4. maryline
       
      je viens de finir la mise a jour de directx, mais du coup je ne sais pas si ça a résolu le probleme, pour le moment pas eu de crash mais bon ça peut mettre du temps avant d'en faire.
      le chkdsk je l'ai déja fait
      0
    5. maryline
       
      bon du coup j'avais relancé l'antivirus en analyse rapide et a nouveau écran bleu, puis a nouveau au redémarrage et encore au redémarrage suivant :(
      0
  13. paslau35 Messages postés 8783 Statut Membre 699
     
    comme je l ais dit aux début
    je pense q une réinstalle de ton pc serais bien a prévoir
    tu a quelle marque de pc ,,,, ou pas
    fixe ou portable
    et puits un antivirus de nos jours ne suffit plus
    0
  14. maryline
     
    j'aimerai pas en arrivé la :( c'est un pc assemblé
    0
    1. paslau35 Messages postés 8783 Statut Membre 699
       
      je comprend mais moi ces ce que je ferais
      ces vrais ça prend du temps
      si tu trouve pas d autre solution je peut te donner un coup de mains
      facile a faire ( )
      je suit pas loin
      0
    2. maryline
       
      bon j'ai réinstaller un windows tout neuf sur une nouvelle partition et dès le premier redémarrage lors de l'installation, écran bleu :(
      Donc ça doit etre matériel, maintenant il faut trouvé lequel
      une ptite aide svp
      0
  15. maryline
     
    comment savoir ce qui déconne ? :(
    0
    1. vieu bison boiteu Messages postés 44334 Date d'inscription   Statut Contributeur Dernière intervention   3 591
       
      laisse que le strict minimum
      disque dur et une barrette mémoire , et tu regardes
      0
    2. maryline
       
      pour la mémoire sous l'ancien windows j'avais déja testé 1 barrette seule ça a planté puis j'ai mis l'autre seule et ça a planté aussi.
      0
    3. vieu bison boiteu Messages postés 44334 Date d'inscription   Statut Contributeur Dernière intervention   3 591
       
      tu as testé une seule barrette sur l'autre bank DIMM , à tour de rôle
      0
    4. maryline
       
      oui, à mon avis ça doit venir de la carte graphique, j'ai des scintillement des fois et la plus part du temps ça plante sur des jeux flash sous facebook
      Mais je ne sais pas comment vérifier pour etre sur
      0
    5. paslau35 Messages postés 8783 Statut Membre 699
       
      il te faut en trouver une autre ,pour être sur
      0
  16. vieu bison boiteu Messages postés 44334 Date d'inscription   Statut Contributeur Dernière intervention   Ambassadeur 3 591
     
    <<<...il faut désactiver le redémarrage auto ...>>>
    OK
    mais comment ???
    elle n' arrive pas sur le "Bureau" , même en mode sans échec
    0
    1. paslau35 Messages postés 8783 Statut Membre 699
       
      je dac et pasdac avec toi
      oui depuis ça nouvelle installe sur ça partition
      ça a planter aux redémarrage
      mais avant ça marcher en mode sans èche

      Marilyne pourrais tu éclairer notre l antenne a ce sujet
      0
    2. maryline
       
      ah mais ça fonctionne windows, ça plante 4-5 fois par jour quand je navigue sur internet.
      J'ai essayé en mode sans echec j'ai eut également un plantage.
      pour les messages d'écran bleu j'en ai déja posté quelques un au tout début. Je peux en reposter si vous voulez
      0
    3. paslau35 Messages postés 8783 Statut Membre 699
       
      a oui autant pour moi
      mais jamais les mêmes en plus
      tu et dans quelles région aux fais
      si ça te dérange pas
      0
    4. maryline
       
      lol dans le sud
      0
    5. paslau35 Messages postés 8783 Statut Membre 699
       
      pas bon, moi en Bretagne
      pour ton pc il va falloir du temps
      a tu essayer de débrancher ton graveur ,ect
      a tour de rôle
      pour voir si ça change quelle que chose
      0
  17. vieu bison boiteu Messages postés 44334 Date d'inscription   Statut Contributeur Dernière intervention   Ambassadeur 3 591
     
    si tu arrives à installer Windows , ta carte graphique fonctionne

    aussi , ton DVD de Windows ne serait pas rayé ???
    0
  18. maryline
     
    non j'ai installé avec une clé usb :p mais je ne vois pas le rapport....
    car mon windows s'est mis a planté d'un coup et j'ai fait une réinstalle et ça a planté après donc pas de rapport avec le dvd de windows
    0
  19. Fredy1973 Messages postés 897 Statut Membre 234
     
    comment tu peux lancer une réinstallation d'un windows qui vient d'un autre PC sur celui là?? c'est normal qu'il plante si le système ne reconnait pas le matériel qui lui est dédié...
    0
    1. paslau35 Messages postés 8783 Statut Membre 699
       
      apprend a lire M fredy
      (et même soucis j'ai installer un windows 7 tout neuf )
      elle et pas une novice elle a formater
      0
    2. maryline
       
      :)
      0
    3. Fredy1973 Messages postés 897 Statut Membre 234
       
      Toutes mes excuses M. paslau35 mais mon message était une réponse au post où était inscrit "... j'ai fait une réinstalle et ça a planté après ...".
      Il est vrai que je me suis un peu perdu dans les messages et les commentaires...
      0
    4. paslau35 Messages postés 8783 Statut Membre 699
       
      a ok
      quand ont sais reconnaitre c est erreurs ,,,,

      Maryline comme je vois que tu a des soucis pour trouver une C G

      moi quand il manque de pièces pour tester des pannes
      je fais comme suit
      je commende sur https://www.amazon.fr/
      l avantage avec eux c est les retours jamais de soucis
      par contre bien prendre avec amazon pas avec un partenaires
      et bien le dire avant 7 jours
      comme ça tu pourrais tester une C G
      une idée ,,,,,,,,,,
      0
    5. maryline
       
      oué bonne idée je vais faire ça
      0