Mettre une adresse sur un routeur cisco 877

Monsesilo Messages postés 200 Statut Membre -  
Monsesilo Messages postés 200 Statut Membre -
Bonjour,
je souhaiterais utiliser un routeur cisco 877 pour avoir Internet via ADSL 2+,
cependant je voudrais garder la configuration du réseau actuel intact. C'est à dire qu'avant pour allez sur internet (en ADSL simple), nous passions par une passerelle 10.0.10.254.
par contre le routeur tester avec les paramètres du fournisseur est en 41.159.6.0.
Je voudrais alors savoir comment faire pour aller sur Internet en mainteant la passerelle 10.0.10.254 sur les postes.
merci!



--

5 réponses

  1. Monsesilo Messages postés 200 Statut Membre 2
     
    je ne cherche pas une adresse, j souhaite que mes pc sortent avec la passerelle 10.0.10.254? PENDANT QUE sur le routeur c'est en 41.159.1

    --
    0
    1. brupala Messages postés 111157 Date d'inscription   Statut Membre Dernière intervention   14 453
       
      Salut,
      l'adresse 41.159.... est l'adresse publique du routeur sur l'interface atm, pas son adresse lan (vlan 1), c'est toi qui la choisit.
      fais show ip int brief en mode enable.
      0
  2. Monsesilo Messages postés 200 Statut Membre 2
     
    non, sur VLAN1 j'ai bien cette adresse qui est la publique, par contre sur ATM0, c'est la privée qu'a placer le fai.
    si je crée un autre vlan, pourrais - je mettre cette adresse?

    --
    0
    1. brupala Messages postés 111157 Date d'inscription   Statut Membre Dernière intervention   14 453
       
      je crois que tu confonds, peux tu coller ici le resultat de sh ip int brief ?
      0
  3. Monsesilo Messages postés 200 Statut Membre 2
     
    FastEthernet0 unassigned YES unset up down

    FastEthernet1 unassigned YES unset down down

    FastEthernet2 unassigned YES unset up down

    FastEthernet3 unassigned YES unset down down

    Dot11Radio0 unassigned YES TFTP administratively down down

    ATM0 unassigned YES NVRAM initializing down

    ATM0.1 10.120.81.78 YES NVRAM initializing down

    Vlan1 41.159.6.17 YES NVRAM up down

    Dialer1 unassigned YES NVRAM up up

    NVI0 unassigned YES unset up up

    Virtual-Dot11Radio0 unassigned YES TFTP administratively down down

    --More--

    --
    0
    1. brupala Messages postés 111157 Date d'inscription   Statut Membre Dernière intervention   14 453
       
      OK,
      effectivement, tu as raison,
      comment cette configuration est elle arrivée là ?
      quelqu'un l' a bien mise ?
      PS,
      rien n'est connecté, c'est normal ?
      tu peux coller ta config en entier ?
      sans les mots de passe et username.
      0
  4. Monsesilo Messages postés 200 Statut Membre 2
     
    MURIMA#show configuration
    Using 3802 out of 131072 bytes
    !
    version 12.4
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    !
    hostname MURIMA
    !
    boot-start-marker
    boot-end-marker
    !
    logging buffered 65535 informational
    !
    no aaa new-model
    !
    resource policy
    !
    ip subnet-zero
    no ip source-route
    ip cef
    !
    !
    ip tcp synwait-time 10
    ip ssh time-out 60
    ip ssh version 2
    !
    crypto pki token default removal timeout 0
    !
    !
    !
    !
    !
    crypto isakmp policy 3
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp key t586#!#*33K#88H$*5S!*%gg!45 address 34.253.3.196 no-xauth
    crypto isakmp key t586#!#*33K#88H$*5S!*%gg!45 address 34.253.3.198 no-xauth
    crypto isakmp key t586#!#*33K#88H$*5S!*%gg!45 address 34.253.131.11 no-xauth
    !
    !
    crypto ipsec transform-set 3DES-SHA esp-3des esp-sha-hmac
    !
    crypto map IPSEC-VPN 100 ipsec-isakmp
    ! Incomplete
    description VPN Link to Aberdeen (UK-ABZ-HAL-E-R3-VPN)
    set peer 34.253.3.196
    set transform-set 3DES-SHA
    match address GRE-TO-UK-ABZ-HAL-E-R3-VPN
    crypto map IPSEC-VPN 110 ipsec-isakmp
    ! Incomplete
    description VPN Link to Aberdeen (UK-ABZ-HAL-E-R4-VPN)
    set peer 34.253.3.198
    set transform-set 3DES-SHA
    match address GRE-TO-UK-ABZ-HAL-E-R4-VPN
    crypto map IPSEC-VPN 120 ipsec-isakmp
    ! Incomplete
    description VPN Link to Tananger (NO-TAN-E-R7)
    set peer 34.253.131.11
    set transform-set 3DES-SHA
    match address GRE-TO-NO-TAN-E-R7
    !
    !
    !
    interface ATM0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    no atm ilmi-keepalive
    dsl operating-mode auto
    !
    interface ATM0.1 point-to-point
    description lien vers Client
    ip address 10.120.81.78 255.255.255.252
    pvc 1/40
    encapsulation aal5snap
    !
    crypto map IPSEC-VPN
    !
    interface FastEthernet0
    !
    interface FastEthernet1
    !
    interface FastEthernet2
    !
    interface FastEthernet3
    !
    interface Dot11Radio0
    no ip address
    shutdown
    speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
    54.0
    station-role root
    !
    interface Vlan1
    description Data VLAN
    ip address 41.159.6.17 255.255.255.248
    ip flow ingress
    ip tcp adjust-mss 1452
    !
    interface Dialer1
    ip address negotiated
    ip mtu 1452
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    no cdp enable
    ppp authentication chap pap callin
    ppp chap hostname mami
    ppp chap password 7 062B2E0C65032A3628
    ppp pap sent-username mami password 7 080C6D63205426383F
    !
    ip classless
    ip route 0.0.0.0 0.0.0.0 10.120.81.77
    !
    no ip http server
    no ip http secure-server
    !
    !
    control-plane
    !
    banner login ^CC GA-POG-R2 ^C
    banner motd ^CC
    This system is for the use of authorized users only. This system and all content

    contained therein constitutes private property and no right of individual
    privacy is accorded, intended, or may be expected. The right to monitor, change,

    record, disclose, use or terminate any activity or content on this system at any

    time and for any purpose is expressly reserved. Non-authorized persons accessing

    this computer system or those improperly using the system are subject to all
    appropriate and available actions. By accessing and using this system, you are
    consenting to the monitoring, recording, and disclosure of your activities,
    including, if involving any possible violation of law, disclosure to appropriate

    authorities.
    ^C
    !
    line con 0
    exec-timeout 15 0
    password 7 1511021F0725
    logging synchronous
    login
    no modem enable
    transport output all
    line aux 0
    exec-timeout 15 0
    password 7 120951031A5B02403B3E212D0930
    logging synchronous
    login
    transport input telnet ssh
    line vty 0 4
    exec-timeout 15 0
    password 7 1511021F0725
    logging synchronous
    login
    !
    scheduler max-task-time 5000
    end

    --
    0
  5. Vous n’avez pas trouvé la réponse que vous recherchez ?

    Posez votre question
  6. geegee
     
    Bonjour

    ipconfig te permet de savoir quel adresse ip on a

    http://m.commentcamarche.net/faq/8102-192-168-0-1
    -2