Cisco en mode bridge avec Peplink

Bonjour,
je veux accorder un routeur Cisco ADSL 887VA avec unPeplink en Mode bridge
voila ma config Merci de bien vouloir m'indiquer la faute ou le manquant :

sh run
Building configuration...

Current configuration : 2049 bytes
!

hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
crypto pki token default removal timeout 0
!
!
ip source-route
ip cef
--More-- !
!
!
!
!
no ipv6 cef
!
!

!
!

!
!
!
controller VDSL 0
!
!
!
!
!
!
!
--More-- !
interface ATM0
no ip address
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
bridge-group 1
pvc 8/35
!
!

!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
--More-- !
interface FastEthernet3
no ip address
!

!
interface Vlan1
ip address 10.10.10.1 255.255.255.0
ip tcp adjust-mss 1412
bridge-group 1
!
interface Dialer0
no ip address
ip mtu 1452
encapsulation ppp
dialer pool 1
dialer-group 1
--More--
!
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
!

!

access-list 1 permit 10.10.10.0 0.0.0.255
access-list 23 permit any
dialer-list 1 protocol ip permit
!
!
!
!
bridge 1 protocol ieee
!
line con 0
line aux 0
line 2
no activation-character
--More-- no exec
transport preferred none
transport input all
stopbits 1
line vty 0 4
login
transport input all
!
scheduler allocate 20000 1000
end

Router#